A topological route choice model for metro

This article presents a route choice model for public transit networks that incorporates variables related to network topology, complementing those found in traditional models based on service levels (travel time, cost, transfers, etc.) and users’ socioeconomic and demographic characteristics (income level, trip purpose, etc.). The topological variables represent concepts such as the directness of the chosen route and user knowledge of the network. For both of these factors, the necessary data is endogenous to the modelling process and can be quantified without the need for information-gathering beyond what is normally required for building route choice models. Other novel variables in the proposed formulation capture notions of user comfort such as vehicle occupancy rates and certain physical characteristics of network stations. We conclude that these new variables significantly improve the explanatory and predictive ability of existing route choice specifications.     

高沁高速公路郑庄至里必段路线方案研究

结合山区地形,按照"以人为本"和"安全、环保、舒适、和谐"的新理念,对典型路段的路线方案进行优化设计、比选分析,最终选择最佳路线方案。     

城市客运模式选择研究

国内目前各城市的客运发展存在着地域之间不平衡,发展面临问题众多的局面,行业管理存在较多待破解的关键性问题.本文从城市客运管理运营模式作为研究视角,通过审视和比较世界不同城市交通的发展模式,结合影响城市客运模式的主要决定因素,论证国内目前的发展阶段和城市客运模式,研究提出适合于中国特点的、可持续发展的城市交通发展模式.     

外塌陷角坐标系与摩尔极限应力圆

外塌陷角坐标系是以岩体外塌陷角α和主应力p 0为因变量的岩石力学运算系统。摩尔极限应力圆是以岩石内摩擦角φ和主应力σ1,σ3为因变量的岩石力学运算系统。2个系统的基础力学参数存在对应转换关系。外塌陷角坐标系表示岩体自然塌陷、岩石试验、围岩运动力学关系具有真实统一性。摩尔极限应力圆在岩石试验中能反映岩石基本力学性质,但是几何图形表示的应力不符合一般应力定义,基本公式存在缺陷,岩石试验主、次应力与围岩主、次应力没有建立对应关系。     

广东省港口物流发展及其战略选择*

深入剖析广东省港口物流发展影响因素,构建灰关联模型,对其进行定量与定性分析。结果表明:集装箱吞吐量和生产总值GDP对港口物流发展起主导作用,港口固定资产投资额和海关进出口总额拉动作用明显。提出"打造集装箱竞争优势、建设技术密集型智能港、构建以港口为核心"的供应链体系的建议,以期为港口物流发展战略转型提供决策参考。     

ISO与BSRA航速修正方法计算实例分析

介绍了ISO与BSRA航速修正方法,并通过采用ISO和BSRA航速修正方法分别对计算实例进行航速修正,得出ISO修正方法可以获得更高的航速指标,并对ISO航速修正方法的合理性和适用性提出建议。     

基于MATLAB的发动机功率计算优化方法研究

发动机功率决定汽车动力性能,在分析发动机功率确定方法的基础上,介绍发动机功率计算优化方法,根据转速的动态确定和拟合相关变量,分析发动机功率计算的影响因素和动态路径,建立基于MATLAB的可以实时求解发动机功率的模型,利用MATLAB的运算工具和强大运算能力,对汽车的动力性设计提供有力的实践计算方法。     

张庄枢纽互通式立交加宽设计

通过对张庄枢纽互通式立交的控制因素和改建方案等进行分析比选,得出最优方案,可为同类互通改建提供参考。     

多孔管孔出流速度和流量影响因素数值仿真及试验

本文通过控制变量法进行工况设计,对多孔管进行数值模拟和试验对比,分别研究多孔管管径、管长、孔径、孔间距、水压五个变量对多孔管孔出流速及流量的影响。使用ANSYS软件中的DesignModeler模块进行几何建模,ICEM中的O-Block技术进行流体计算域网格划分,Fluent软件进行求解。研究发现,多孔管管内径和管长的增加均使孔出流速和出流量减小,管长度的增加会影响孔出流沿程的均匀性;孔径的增大使孔出流速明显减小,且影响孔出流沿程的均匀分布,出流量受孔径的影响较复杂,在孔径不超过2.5mm时可以认为出流量与孔径的平方成正比;孔间距的增大对孔出流速和沿程均匀分布基本无影响,而与出流量成正比。最后将数值模拟结果和试验进行对比,发现试验数据所反映的多孔管出流量与管内径、管长、孔径和孔间距的关系与数值模拟基本吻合,而试验中管的出流量普遍比数值模拟小。     

Biofuel futures in road transport – A modeling analysis for Sweden

First and second generation biofuels are among few low-carbon alternatives for road transport that currently are commercially available or in an early commercialization phase. They are thus potential options for meeting climate targets in the medium term. For the case of Sweden, we investigate cost-efficient use of biofuels in road transport under system-wide CO₂ reduction targets to 2050, and the effects of implementation of targets for an almost fossil-free road transport sector to 2030. We apply the bottom-up, optimization MARKAL_Sweden model, which covers the entire Swedish energy system including the transport sector. For CO₂ reductions of 80% to 2050 in the Swedish energy system as a whole, the results of the main scenario show an annual growth rate for road transport biofuels of about 6% from 2010 to 2050, with biofuels accounting for 78% of road transport final energy use in 2050. The preferred biofuel choices are methanol and biomethane. When introducing additional fossil fuel phase-out policies in road transport (−80% to 2030), a doubling of the growth rate to 2030 is required and system CO₂ abatement costs increases by 6% for the main scenario. Results imply that second generation biofuels, along with energy-efficient vehicle technologies such as plug-in hybrids, can be an important part of optimized system solutions meeting stringent medium-term climate targets.