How the environmental impact affects the design of logistics networks based on cost minimization

The degree of centralization of the logistics network is one of the important strategic decisions to take. This issue has often been studied but mainly from a cost minimization focus. This research studies the influence of incorporating the environmental impact in logistics network design models, comparing the results with those obtained considering cost minimization only. A fuzzy biobjective optimization model is used to carry out a number of experiments. By weighting the relative importance of the two objectives, the differences with respect to the base cost minimization solution can be ascertained. Our results show that in general more material is moved through warehouses when the environmental impact is considered and more decentralized facilities are opened.     

Reducing CO2 emissions in temperature-controlled road transportation using the LDVRP model

Temperature-controlled transport is needed to maintain the quality of products such as fresh and frozen foods and pharmaceuticals. Road transportation is responsible for a considerable part of global emissions. Temperature-controlled transportation exhausts even more emissions than ambient temperature transport because of the extra fuel requirements for cooling and because of leakage of refrigerant. The transportation sector is under pressure to improve both its environmental and economic performance. To explore opportunities to reach this goal, the Load-Dependent Vehicle Routing Problem (LDVRP) model has been developed to optimize routing decisions taking into account fuel consumption and emissions related to the load of the vehicle. However, this model does not take refrigeration related emissions into account. We therefore propose an extension of the LDVRP model to optimize routing decisions and to account for refrigeration emissions in temperature-controlled transportation systems. This extended LDVRP model is applied in a case study in the Dutch frozen food industry. We show that taking the emissions caused by refrigeration in road transportation can result in different optimal routes and speeds compared with the LDVRP model and the standard Vehicle Routing Problem model. Moreover, taking the emissions caused by refrigeration into account improves the estimation of emissions related to temperature-controlled transportation. This model can help to reduce emissions of temperature-controlled road transportation.     

Generating lane-based intersection maps from crowdsourcing big trace data

Lane-based road information plays a critical role in transportation systems, a lane-based intersection map is the most important component in a detailed road map of the transportation infrastructure. Researchers have developed various algorithms to detect the spatial layout of intersections based on sensor data such as high-definition images/videos, laser point cloud data, and GPS traces, which can recognize intersections and road segments; however, most approaches do not automatically generate Lane-based Intersection Maps (LIMs). The objective of our study is to generate LIMs automatically from crowdsourced big trace data using a multi-hierarchy feature extraction strategy. The LIM automatic generation method proposed in this paper consists of the initial recognition of road intersections, intersection layout detection, and lane-based intersection map-generation. The initial recognition process identifies intersection and non-intersection areas using spatial clustering algorithms based on the similarity of angle and distance. The intersection layout is composed of exit and entry points, obtained by combining trajectory integration algorithms and turn rules at road intersections. The LIM generation step is finally derived from the intersection layout detection results and lane-based road information, based on geometric matching algorithms. The effectiveness of our proposed LIM generation method is demonstrated using crowdsourced vehicle traces. Additional comparisons and analysis are also conducted to confirm recognition results. Experiments show that the proposed method saves time and facilitates LIM refinement from crowdsourced traces more efficiently than methods based on other types of sensor data.     

递进式连锁经营管理专业实践教学改革研究——基于加盟创业项目视角

连锁经营管理专业人才培养目标大多定位在一线服务员或基层管理者，所培养的学生必须具备较强的连锁专业能力和创业能力，而大多数高职院校培养出来的学生在这些方面所表现出来的能力却差强人意，尤其是创业能力方面。本文提出将加盟创业项目贯穿于连锁经营管理实践教学全过程，按照“仿真训练-校内孵化-校内模拟-市场全真”四个阶段，形成一个递进式的实践教学流程，从而促使学生的专业能力和创业能力实现递进式提升。     

基于传播模型的非机动车违规过街行为研究

为研究信号交叉口非机动车违规过街行为，选取西安市的7个信号交叉口，通过视频拍摄获取资料，应用复杂网络来分析非机动车网络的结构特征和演化规律.建立了交叉口非机动车网络，基于SI模型的基本思想，提出了非机动车违规过街行为的传播模型.并通过python程序进行模拟分析，在不同的网络结构和不同的传播率下，获取了非机动车违规过街的行为趋势.结果表明：随着等待时间的增加，一旦有骑行者闯红灯，更多的骑行者将加入到违规过街的行列；在内向度和外向度方面，电动自行车均高于普通自行车；非机动车违规行为随着传播率及非机动车流量的增加而增加.     

Urban single-lane roundabouts: A new analytical approach using multi-criteria and simultaneous multi-objective optimization of geometry design,efficiency and safety

Building safe and effective roundabouts requires optimizing traffic (operational) efficiency (TE) and traffic safety (TS) while taking into account geometric factors, traffic characteristics and local constraints. Most existing simulation-based optimization models do not simultaneously optimize all these factors. To capture the relationship among geometry, efficiency and safety, we put forward a model formulation in this paper. We present a new multi-criteria and simultaneous multi-objective optimization (MOO) model approach to optimize geometry, TE and TS of urban unsignalized single-lane roundabouts. To the best of our knowledge, this is the first model that uses the multi-criteria decision-making method known as analytic hierarchy process to evaluate and rank traffic parameters and geometric elements of urban single-lane roundabouts. The model was built based on comprehensive review of the research literature and existing roundabout simulation software, a field survey of 61 civil and traffic expert engineers in Croatia, and field studies of roundabouts in the Croatian capital city of Zagreb. We started from the basis of Kimber’s capacity model, HCM2010 serviceability model, and Maycock and Hall's accident prediction model, which we extended by adding sensitivity analysis and powerful MOO procedures of the bounded objective function method and interactive optimization. Preliminary validation of the model was achieved by identifying the optimal and most robust of three geometric alternatives (V.1-V.3) for an unsignalized single-lane roundabout in Zagreb, Croatia. The geometric parameters in variant V.1 had significantly higher values than in the existing design V.0, while approaches 1 and 3 in variant V.2 were enlarged as much as possible within allowed spatial limits and Croatian guidelines, reflecting their higher traffic demand. Sensitivity analysis indicated that variant V.2 showed the overall highest TE and TS across the entire range of traffic flow demand and pedestrian crossing flow demand at approaches. At the same time, the number of predicted traffic accidents was similar for all three variants, although it was lowest overall for V.2. The similarity in predicted accident frequency for the three variants suggests that V.2 provides the greatest safety within the predefined constraints and parameter ranges explored in our study. These preliminary results suggest that the proposed model can optimize geometry, TE and TS of urban single-lane roundabouts.     

LED灯具在高速列车照明系统中的应用

随着我国高速铁路事业的发展,旅客对车内照明环境品质的要求越来越高,在我国高速列车照明设计中广泛采用LED灯具作为光源。通过对高速动车组车载灯具与25T型列车传统车载灯具的测试对比,总结出LED灯具在发光效率等方面相对于传统灯具的优势,为高速动车组室内照明设计提供依据。     

Point-to-point speed enforcement systems: Speed limits design criteria and analysis of drivers’ compliance

Point-to-point (P2P) speed enforcement is a relatively new approach to traffic law enforcement. Its technology allows vehicles whose average speed exceeds the speed limit over the controlled section to be fined. It therefore encourages compliance over distances longer than those where spot enforcement policies have been in place.In this paper, a procedure for consistently setting speed limits with such enforcement systems is proposed. Such a method has been applied to design the speed limits on two motorways in the district of Naples, Italy, where P2P enforcement systems became operational in 2009 and 2010. The speed limits, which were set using the Italian geometric design standard to assess vehicle stability and stopping sight distance, have been compared with those provided by using well-known international standards.The impact of the newly designed speed limits and of the P2P enforcement system on drivers’ speeding behaviour has been quantified for each highway section and vehicle type. In fact, accurate measurements of the average travel speeds of each vehicle crossing the enforced sections, before and after the activation of the system, were available. The migration from the old speed limits with spot speed enforcement to the new approach resulted in a notable increase in drivers’ compliance to the speed limits with a remarkable decrease in both the average of individual speeds and in their standard deviation.In addition, the analysis of 3 years of data shows that a gradual adaptation of drivers’ behaviour to the system took place. In particular, a decreasing compliance to the speed limits points to a non-optimal system management. Finally, the results of a revealed preference survey allowed us to make a behavioural interpretation regarding the significantly different impacts measured on the two motorways.     

邢衡高速公路邢台段桥梁设计技术要点

通过邢衡高速公路邢台段桥梁设计实践，阐述桥梁设计中的关键技术及要点，对同行具有一定的借鉴意义。