Design of tyre force excitation for tyre–road friction estimation

Knowledge of the current tyre–road friction coefficient is essential for future autonomous vehicles. The environmental conditions, and the tyre–road friction in particular, determine both the braking distance and the maximum cornering velocity and thus set the boundaries for the vehicle. Tyre–road friction is difficult to estimate during normal driving due to low levels of tyre force excitation. This problem can be solved by using active tyre force excitation. A torque is added to one or several wheels in the purpose of estimating the tyre–road friction coefficient. Active tyre force excitation provides the opportunity to design the tyre force excitation freely. This study investigates how the tyre force should be applied to minimise the error of the tyre–road friction estimate. The performance of different excitation strategies was found to be dependent on both tyre model choice and noise level. Furthermore, the advantage with using tyre models with more parameters decreased when noise was added to the force and slip ratio.     

The Kalker book of tables for non-Hertzian contact of wheel and rail

A new regularisation of non-elliptical contact patches has been introduced, which enables building the look-up table called by us the Kalker book of tables for non-Hertzian contact (KBTNH), which is a fast creep force generator that can be used by multibody dynamics system simulation programs. The non-elliptical contact patch is regularised by a simple double-elliptical contact region (SDEC). The SDEC region is especially suitable for regularisation of contact patches obtained with approximate non-Hertzian methods for solving the normal contact problem of wheel and rail. The new regularisation is suitable for wheels and rails with any profiles, including worn profiles.

The paper describes the new procedure of regularisation of the non-elliptical contact patch, the structure of the Kalker book of tables, and parameterisation of the independent variables of the tables and creep forces.

A moderate volume Kalker book of tables for SDEC region suitable for simulation of modern running gears has been computed in co-simulation of Matlab and program CONTACT.

To access the creep forces of the Kalker book of tables, the linear interpolation has been applied.

The creep forces obtained from KBTNH have been compared to those obtained by program CONTACT and FASTSIM algorithm. FASTSIM has been applied on both the contact ellipse and the SDEC contact patch. The comparison shows that KBTNH is in good agreement with CONTACT for a wide range of creepage condition and shapes of the contact patch, whereas the use of FASTSIM on the elliptical patch and SDEC may lead to significant deviations from the reference CONTACT solutions.

The computational cost of calling creep forces from KBTNH has been estimated by comparing CPU time of FASTSIM and KBTNH. The KBTNH is 7.8–51 times faster than FASTSIM working on 36–256 discretisation elements, respectively.

In the example of application, the KBTNH has been applied for curving simulations and results compared with those obtained with the creep force generator employing the elliptical regularisation. The results significantly differ, especially in predicted creepages, because the elliptical regularisation neglects generation of the longitudinal creep force by spin creepage.     

Dynamic simulation of train–truck collision at level crossings

Trains crashing onto heavy road vehicles stuck across rail tracks are more likely occurrences at level crossings due to ongoing increase in the registration of heavy vehicles and these long heavy vehicles getting caught in traffic after partly crossing the boom gate; these incidents lead to significant financial losses and societal costs. This paper presents an investigation of the dynamic responses of trains under frontal collision on road trucks obliquely stuck on rail tracks at level crossings. This study builds a nonlinear three-dimensional multi-body dynamic model of a passenger train colliding with an obliquely stuck road truck on a ballasted track. The model is first benchmarked against several train dynamics packages and its predictions of the dynamic response and derailment potential are shown rational. A geometry-based derailment assessment criterion is applied to evaluate the derailment behaviour of the frontal obliquely impacted trains under different conditions. Sensitivities of several key influencing parameters, such as the train impact speed, the truck mass, the friction at truck tyres, the train–truck impact angle, the contact friction at the collision zone, the wheel/rail friction and the train suspension are reported.     

自锚式斜拉-悬索协作体系桥静风响应分析

自锚式斜拉-悬索协作体系桥作为一种全新的结构体系,兼备了自锚式悬索桥和斜拉桥的许多优点,结构体系则更为复杂。结合400m主跨的金州海湾大桥这一实际工程方案,建立了有限元空间分析模型,分析了其在静风荷载作用下的非线性行为,总结了初始攻角、附加攻角等参数及是否考虑缆索系统承受风荷载等对体系的影响规律。     

基于系统动力学的大连市出租车保有量预测

采用系统动力学模型,找出影响出租车规模内外因素间的因果关系,包括经济、人口、机动车保有量、出行需求、政策等.在系统结构分析和因果反馈分析的基础上建立了出租车系统,以大连市出租车相关统计数据进行仿真计算,分析了不同的发展政策对出租车系统的影响,提出相应的建议和对策.     

船用桨后固定组合叶轮节能效果研究

船用桨后固定组合叶轮是一种新型螺旋桨节能装置。为了解其节能机理并验证节能效果,基于计算流体力学(CFD)方法对该问题进行研究。首先选用B4-65螺旋桨进行敞水数值模拟,验证计算模型和方法的正确性;然后重点对螺旋桨在加装桨后固定组合叶轮后的水动力性能进行模拟。结果表明:桨后固定组合叶轮能够较好地削弱螺旋桨后方的梢涡与毂涡,回收尾流能量。而且该节能装置能与螺旋桨产生有利干扰,增加桨叶上的推力。在低进速区(J0.4)时,该节能装置能达到2%以上的节能效果。     

大型船舶推进轴系扭振特性仿真和试验

基于多体动力学耦合理论结合有限元理论,以1艘大型船舶为研究对象,建立其推进轴系的刚柔耦合多体动力学仿真模型,对大型低转速推进轴系在工作中的扭振特性进行研究。在仿真计算的基础上,利用扭振测试系统对实船的扭振进行测量,并从多个谐次将轴系扭振的仿真计算值与试验测量值进行对比和分析。分析结果表明,通过仿真计算得到的轴系扭转振动变化趋势与实际测量值基本相符,验证了仿真模型的正确性和可行性。同时,通过Adams/Virbration模块分析了船体变形对轴系扭振的影响,证明了船体变形会导致轴系扭转振动增大。     

汽车动理学模型综述

随着汽车动态仿真的发展,产生了不同复杂程度的汽车动理学模型,主要分为集中参数模型和多体模型。在简要说明汽车动理学发腰过程的基础上,介绍了用集中参数模型法建立的动力传动系模型、路面模型以及研究汽车平顺性和操纵稳定性的整车模型,技术介绍了多体模型以及用有限元法和动态子结构法建立的仿直模型,最后提出了汽车动理学模型的发展趋势。     

桥墩抗船撞击性能研究

桥梁在船舶碰撞时受到的动力载荷和响应是复杂的动力非线性问题。首先阐述了船桥碰撞常用的研究方法,同时简要介绍了数值模拟方法的基本原理。用非线性有限元程序LS-DANA对一艘5万t实船与桥梁的碰撞过程进行了仿真分析,研究了有、无防撞装置对桥梁冲击性能的影响,结果表明柔性防撞装置既能保护桥墩又保护了船的安全,计算结果为工程设计提供了有价值的数据。     

基于分子动力学模拟的橡胶改性沥青在集料表面的扩散特征研究

橡胶改性沥青和集料之间的界面作用与沥青路面的耐久性、高温稳定性有着重要联系而现有研究对该界面作用的微观认知尚不够全面。基于分子动力学模拟,以Materials Studio软件为研究工具,构建由基质沥青、天然橡胶沥青、顺丁橡胶沥青、丁苯橡胶沥青（15%掺量）与集料的4种主要矿物组成（石英、方解石、钠长石、微斜长石）两两构成的界面模型,从分子尺度上探究不同沥青组分在4种矿物表面的扩散行为,分析得到不同橡胶类型对其扩散作用的影响规律。结果表明：轻质组分在各矿物表面的扩散作用强于重质组分,相对分子质量对沥青组分的扩散速率起到关键作用;在不同矿物表面,橡胶分子链的加入对于提升沥青各组分扩散系数多为积极作用,且不同类型橡胶作用规律有所不同。研究结果可为不同矿料类型制备适配的橡胶改性沥青提供参考依据。