基于ISO/IEC 9126的Web资源质量评测系统

为了管理基于Web的信息系统的资源质量,以国际软件质量管理标准（ISO／IEC9126）为基础,建立了Web资源质量评测系统,该系统包括多维多层次的Web资源质量评测模型（WebQM）、Web资源质量评测算法以及评测结果的鲁棒性分析,详细讨论了Web资源质量建模和应用TOPSIS算法评测Web资源质量的过程,鲁棒性分析主要研究了质量评测过程中评测参数取值对评测结果的影响,以优化Web资源质量模型和完善关键指标。     

强迫布鲁塞尔振子相图的研究

针对强迫布鲁塞尔振子模型的Ｆａｒｅｙ序列与Ｍ．Ｓ．Ｓ序列进行了扩大区域的研究，表明单峰映中看成圆映象的近似，并建立了圆映象的相图，单峰映象的相图及符号动力学间的关系。     

污水处理厂污泥堆肥化的工艺特性及其运用

污泥堆肥化处理系统是适合国内污泥处理的新工艺，可以有效合理地解决污泥的处置和利用问题，保护环境、节省资源．介绍了污泥堆肥化的工艺方式、作业条件及检测指标，提出了堆肥化过程中应注意的问题。     

半潜起重铺管船关键连接节点设计对比分析

针对半潜式起重铺管船的设计关键节点——立柱与上平台转角处,采用直接计算方法,对两种不同的设计连接形式进行分析研究。分别对两种不同连接形式在屈服强度、疲劳寿命和施工建造三个方面进行对比,得到较优的结构设计,可供相关设计者参考。     

基于Pro/E的机械标准零件库建立的方法

介绍了在Pro／Engineer环境下利用其二次开发工具程序(Program)和族表(Family Table)建立机械标准件库的原理和方法,并通过建立六角头螺栓零件库的实例,阐明了建立标准件库的具体步骤。     

船用往复泵管路减振技术研究

船舶往复式水泵管路振动一直是国内有待解决的难题，本文在分析往复式舱底泵管路振动产生机理的基础上，针对往复式水泵管路振动特性，运用近年来研制的一些新型管路减振元件，如袖套式挠性接管、管路消振器、管路流体压力蓄能器等，对往复式水泵管路振动进行试验研究，为管路减振设计提供了有意义的参考依据。     

船舶舵鳍联合减摇模糊变结构控制研究

分析了船舶运动的非线性模型,根据实际情况进行假设,得到了船舶舵鳍联合减摇控制系统的状态方程,把非线性船舶舵鳍联合控制模型转化为可控正则型;将船舶运动模型看作是由横摇、艏摇、横荡3个子系统构成的大系统,进行了舵鳍联合控制,设计了舵鳍联合控制器和分散非线性变结构控制器,为了改善控制的品质,又进一步提出了模糊趋近律变结构控制的方法,最后针对减摇控制器进行了MATLAB仿真研究。仿真结果表明:舵鳍联合控制器能够很好的抑制船舶的横摇和艏摇,并能尽可能的减小横荡。     

Application of new parameterizations of gas transfer velocity and their impact on regional and global marine CO2 budgets

One of the dominant sources of uncertainty in the calculation of air–sea flux of carbon dioxide on a global scale originates from the various parameterizations of the gas transfer velocity, k, that are in use. Whilst it is undisputed that most of these parameterizations have shortcomings and neglect processes which influence air–sea gas exchange and do not scale with wind speed alone, there is no general agreement about their relative accuracy.The most widely used parameterizations are based on non-linear functions of wind speed and, to a lesser extent, on sea surface temperature and salinity. Processes such as surface film damping and whitecapping are known to have an effect on air–sea exchange. More recently published parameterizations use friction velocity, sea surface roughness, and significant wave height. These new parameters can account to some extent for processes such as film damping and whitecapping and could potentially explain the spread of wind-speed based transfer velocities published in the literature.We combine some of the principles of two recently published k parameterizations [Glover, D.M., Frew, N.M., McCue, S.J. and Bock, E.J., 2002. A multiyear time series of global gas transfer velocity from the TOPEX dual frequency, normalized radar backscatter algorithm. In: Donelan, M.A., Drennan, W.M., Saltzman, E.S., and Wanninkhof, R. (Eds.), Gas Transfer at Water Surfaces, Geophys. Monograph 127. AGU,Washington, DC, 325–331; Woolf, D.K., 2005. Parameterization of gas transfer velocities and sea-state dependent wave breaking. Tellus, 57B: 87–94] to calculate k as the sum of a linear function of total mean square slope of the sea surface and a wave breaking parameter. This separates contributions from direct and bubble-mediated gas transfer as suggested by Woolf [Woolf, D.K., 2005. Parameterization of gas transfer velocities and sea-state dependent wave breaking. Tellus, 57B: 87–94] and allows us to quantify contributions from these two processes independently.We then apply our parameterization to a monthly TOPEX altimeter gridded 1.5° × 1.5° data set and compare our results to transfer velocities calculated using the popular wind-based k parameterizations by Wanninkhof [Wanninkhof, R., 1992. Relationship between wind speed and gas exchange over the ocean. J. Geophys. Res., 97: 7373–7382.] and Wanninkhof and McGillis [Wanninkhof, R. and McGillis, W., 1999. A cubic relationship between air−sea CO2 exchange and wind speed. Geophys. Res. Lett., 26(13): 1889–1892]. We show that despite good agreement of the globally averaged transfer velocities, global and regional fluxes differ by up to 100%. These discrepancies are a result of different spatio-temporal distributions of the processes involved in the parameterizations of k, indicating the importance of wave field parameters and a need for further validation.     

基于B/S的车辆管理信息系统的设计与实现

在对某供电公司车辆的运行现状分析的基础上,提出利用现在大多数公司都已经建立起来的局域网建立基于B/S模式的车辆管理系统的方案,有效地解决人工管理或半自动化管理带来的效率低下和准确性不够等问题.     

广州地铁三号线洛溪车辆段出入段线设计方案及能力分析

研究目的:地铁车辆段出入段线设计方案对地铁运营效率和成本有重大影响,广州地铁三号线在国内首次采用了3/6辆灵活编组替换运营的全新运营模式,对车辆段的出入段能力提出了更高的要求。对车辆段出入段线方案进行优化和能力分析研究不仅对广州地铁三号线车辆段设计具有重要意义,也可供其他地铁车辆段设计借鉴和参考。研究方法:通过对广州地铁三号线车辆段出入段线设计方案的比较分析,以及对推荐方案出入段能力的计算分析,研究设计方案的合理性和适应性。研究结论:在广州地铁三号线的用地和站段位置等限制条件下,经过优化的设计方案具备较强的优越性,能够满足三号线新运营模式的要求。