出口澳大利亚30t轴重ZK1—K型转向架的研制

介绍了出口澳大利亚30t轴重ZK1—K型转向架的主要技术特征、技术参数和结构,并对其强度和动力学性能进行了计算与试验。结果表明,该转向架的各项指标均满足相关标准的要求。     

轨道交通供电系统功率因数分析及补偿方案研究

研究目的:近年来我国轨道交通建设事业迅猛发展,但功率因数问题一直是困扰轨道交通供电系统的重要问题,常常导致电力部门的高额罚款。为提高功率因数,需对无功补偿方案进行研究。在分析国内城市轨道交通供电系统无功补偿现状的基础上,通过对整个供电系统综合功率因数的分析计算,研究几种无功补偿方案,并最终确定一种新的综合无功补偿方案。研究结论:城市轨道交通线路的无功补偿方案应根据自身供电系统的实际情况,并通过综合功率因数分析计算或实测分析,来综合考虑采用高压、低压侧相结合的无功补偿方案;在条件允许时,建议采用主所设SVG+各车站变电所0.4 kV侧设APF的综合补偿方案。     

城市轨道交通工程投资控制主要因素分析

近几年来,各大中城市为缓解交通拥堵问题,纷纷申报计划加大轨道交通建设力度。轨道交通建设一次性投资大、建设周期长、运营和管理成本高,为有效控制建设规模和投资,对轨道交通工程造价构成进行分析。通过分析提出控制工程造价的5个方面的主要因素和措施,即搞好轨道交通线网规划、注重资源共享,科学合理地确定线路敷设方式,合理确定车站结构与规模,选择最优施工方法,采用国产机电设备,降低工程造价。希望能对有效控制工程投资起到应有的借鉴作用。     

铁路货车工艺工程化研究

为全面提升铁路货车制造工艺技术水平,以铁路货车设计、制造工艺现有的不足为切入点,提出设计、工艺并行理念,深化基础工艺和工艺可靠性研究,推行货车工艺的工程化,采用精益制造模式,以提升工艺研发手段来实现货车的高质量制造。     

关于提高货车制动系统关键部件可靠性方法的探讨

通过对我国现有铁路货车制动系统进行分析,并与国外先进制动系统对比,得出我国货车制动系统存在检修周期短、关键零部件可靠性不高的问题。同时,根据目前存在的问题,简要论述提高我国货车制动系统可靠性的方法。     

基于期权理论的铁路货运定价模型

为了规避铁路运输企业和协议客户在市场价格波动情况下所面临的风险,在铁路货运的定价过程中引入期权的概念,利用二叉树模型为期权定价,在此基础上构建了基于铁路运输企业和协议客户收益最大条件下的铁路货运定价模型。研究结果表明:通过铁路运输企业和协议客户的最优定价决策可以求得铁路运输企业制定的协议价格和协议客户的期权购买量;协议价格与现货市场价格正相关,与铁路运输企业的长期准备成本正相关、短期准备成本负相关;随着期权价格和期权执行价格的升高,协议客户在契约市场所购买的期权数量逐渐减少。     

用改进的前向神经网络预测铁路货运量

对影响铁路货运量的因素进行了分析。根据影响铁路货运量的诸因素的特点，介绍了一种改进的前向神经网络预测方法，并建立了铁路货运量前向神经网络预测模型。算例表明，其预测精度高于常规预测方法。     

Wheel-rail contact models for vehicle system dynamics including multi-point contact

Advanced modelling of rail vehicle dynamics requires realistic solutions of contact problems for wheels and rails that are able to describe contact singularities, encountered for wheels and rails. The basic singularities demonstrate themselves as double and multiple contact patches. The solutions of the contact problems have to be known practically in each step of the numerical integration of the differential equations of the model. The existing fast, approximate methods of solution to achieve this goal have been outlined. One way to do this is to replace a multi-point contact by a set of ellipses. The other methods are based on so-called virtual penetration. They allow calculating the non-elliptical, multiple contact patches and creep forces online, during integration of the model. This allows nearly real-time simulations. The methods are valid and applicable for so-called quasi-Hertzian cases, when the contact conditions do not deviate much from the assumptions of the Hertz theory. It is believed that it is worthwhile to use them in other cases too.     

An analysis of rail freight operational efficiency and mode share in the British port-hinterland container market

The growth in container shipping poses considerable challenges to efforts to reduce the negative externalities associated with freight transport. There are particular concerns about the impacts of the associated port-hinterland freight flows. Through empirical research, this paper examines trends in the operational efficiency of the British port-hinterland container rail freight market and to assess the impacts of any changes on the overall sustainability of this market. Original survey work conducted in 2007 and 2015 has allowed longitudinal and cross-sectional analysis of the characteristics of this market.The survey findings reveal that rail’s mode share of port container throughput (in TEU) has increased from 14.7% in 2007 to 16.6% in 2015 and it is likely that its share of the associated hinterland activity has also risen. Rail was carrying 25% more TEU by 2015 without an increase in train service provision. Increases in mean train capacity and mean load factor were observed, leading to growth in the mean train load from 44 TEU in 2007 to 55 TEU in 2015. This considerable improvement in operational efficiency is expected to have reduced the negative externalities per unit of transport activity associated with the rail-borne hinterland container flows, though scope is identified for further improvements in sustainability.     

轨道交通预制U形梁力学性能研究

以青岛蓝色硅谷城际轨道交通高架桥预制U形梁为工程背景,运用有限元方法对比分析先张法和后张法预制U形梁内力、应力状态及变形3方面的力学性能。对先张法和后张法U形梁进行静载试验,详细分析试验荷载下U形梁的刚度及抗裂性等指标。结果表明,先张法预应力U形梁力学性能优越,具有推广应用潜力。