浅埋暗挖地铁隧道施工监测方法

文章以重庆市地铁一号线大坪车站临时施工便道为例,对在浅埋、软岩条件下既有隧道拆除采用工字钢支顶、风镐破岩,新建隧道采用台阶法环形开挖预留核心土、人工非爆破开挖的施工方法,通过现场监控量测,得出最大地表沉降仅为3.82mm,表明采用合理的施工方法可以减少地表沉降。     

Time taken for residents to adopt a new public transport service: examining heterogeneity through duration modelling

When a new public transport service is introduced it would be valuable for public authorities, financing organisations and transport operators to know how long it will take for people to start to use the service and what factors influence this. This paper presents results from research analysing the time taken for residents living close to a new guided bus service to start to use (or adopt) the service. Data was obtained from a sample of residents on whether they used the new service and the number of weeks after the service was introduced before they first used it. Duration modelling has been used to analyse how the likelihood of starting to use the new service changes over time (after the introduction of the service) and to examine what factors influence this. It is found that residents who have not used the new service are increasingly unlikely to use it as time passes. Those residents gaining greater accessibility benefits from the new service are found to be quicker to use the service, although the size of this effect is modest compared to that of other between-resident differences. Allowance for the possibility that there existed a proportion of the sample that would never use the new service was tested using a split population model (SPD) model. The SPD model indicates that 36% of residents will never use the new service and is informative in differentiating factors that influence whether Route 20 is used and when it is used.

Estimating the robustness of questionnaire results: lessons from a mixed-mode survey of expectations for tele-working and road-based business travel

The robustness of questionnaire results to various forms of bias are explored in the context of a dual-mode (web and hardcopy) survey of employers’ anticipations of levels of employee commuting and business travel activity under a range of future ICT scenarios. The questionnaire incorporated several innovative features which, together with the dual-mode format, allowed an unusually wide range of analyses. For example: the robustness of respondents’ opinions was tested by examining the effect of incorporating alternative versions of a briefing text, one being very positive and one very negative, about the role of ICT; instrument bias was identified via detailed comparison of the results from the two versions of the questionnaire; and the impact of exogenous factors which are often ignored or taken as constant was assessed via special supplementary questions. Analysis showed that the robustness of opinions and expectations varied and was influenced by respondent characteristics, and that results from the two versions of the questionnaire differed significantly. It is concluded that opinions and expectations are less robust, and questionnaire results are more subject to bias and myopic interpretation, than is generally recognised and that web-based surveys seem particularly vulnerable to sampling bias. Methods are suggested for measuring robustness, for reducing bias and for validating and contextualising results. The use of contrasting briefing texts is recommended as a means of establishing the robustness of opinions and expectations while supplementary questions are recommended for validating and contextualising SP and SE exercises.

往复式压缩机气阀密封面失效分析

气阀是压缩机中发生故障最频繁的部件,故障会直接导致机组排气压比失调、排温高等现象,很大程度上影响企业安全生产及设备的使用寿命.文中对压缩机气阀结构及其故障特征进行了简要阐述,并通过实例分析气阀的故障特征,结合HYSYS计算出工艺气压缩过程中的各组分相图,分析了压缩工艺中气带液的产生过程,总结概括了压缩机气阀密封面失效的...     

丽香铁路黄山哨隧道下穿岩堆段设计施工关键技术

以下穿岩堆段的丽香铁路黄山哨隧道为工程依托,对岩堆段地表开裂及洞内初期支护边墙严重变形的问题进行研究。地表埋设6根测斜管监测地表位移情况,洞内布置3个断面进行围岩压力、钢架内力、二次衬砌内力、初期支护与二次衬砌间的接触压力、锚杆轴力量测。在分析现场岩堆段洞内外受力机制及原因的基础上,根据数值计算结果优化二次衬砌断面型式及进一步加大二次衬砌厚度及配筋。采取以下措施控制隧道岩堆段变形： 1）地表岩堆土石接触面开裂处增设截排水措施; 2）加大隧道初期支护钢架型号及加长岩堆侧边墙径向系统锚杆; 3）加大隧道边墙轮廓曲率并优化隧道二次衬砌型式为圆顺型; 4）隧道预留变形量加大至30 cm; 5）隧道二次衬砌内净空预留50 cm补强空间; 6）隧道拱部设置42小导管超前支护。现场岩堆段采取以上措施后已顺利施工通过,根据洞内外监测结果显示,结构在安全可控范围内。     

基于插补原理的船体复杂曲面加热线布置方法

船体曲面成形技术是船舶加工过程中重要的环节。如何更好更快实现船体复杂曲面加工,一致以来备受国内外学者的关注。本文借鉴插补原理,对传统船体复杂曲面加热线布置进行了优化设计,得到了圆弧形板、s形板、帆形板和马鞍板的加热线。采用COMSOL Multiphysics多物理场仿真软件,分析四种加热线下钢板变形情况,并通过实验检验了插补形式下的船体曲面成形效果。结果表明：(1)插补算法得到的船体曲面加热线路程比传统加热线路程节约75%以上。(2)对有限元计算位移进行曲面拟合,得到的预测模型与实际船体曲面基本一致。(3)实验了四种曲面加热线,并将有限元预测位移与实验进行对比,二者误差在6%以内,有限元计算与实验结果基本吻合。该方法降低加工时间,提高加工效率。     

复合动力超长续航无人艇系统的设计与实现

为实现无人艇在海上追踪、搜救、巡逻、反潜等任务中的超长续航,避免因油料限制而被迫任务中断,设计了一套以风能、太阳能为动力的无人艇系统,利用风帆为无人艇推进,太阳能为船上电控设备提供电能。该系统由无人艇和岸基监控平台组成,无人艇可通过python开发的数据采集模块和算法模块实时采集环境数据、计算、生成并下达控制指令,在风区内可超长续航自主航行,实现全风向利用;岸基监控平台可实时监控无人艇状态,并进行自主/遥控模式切换。对系统进行了测试,通讯连接试验的可靠性高;无人艇航行试验验证了全风向自主航行的可行性,运行轨迹与仿真结果基本重合;太阳能供电分析理论上验证了风区超长续航的可实现性。     

基于改进移动最小二乘法的结构可靠性分析

基于改进移动最小二乘法对结构可靠性问题进行分析,数值模拟结果表明,改进方法可有效提高计算精度.具体方法是使用椭圆范数代替二范数来度量样本点到中心点的距离,并根据上次迭代所得到的响应面在中心点处的法向量与坐标轴所成角度,对影响域进行旋转变换;从而将样本点的权重大小由样本点与中心点、响应面的距离共同决定,并将每次迭代得到的响应面函数在中心点处的法向信息包含在内.     

受侧向冲击的混凝土墩柱本构模型对比

采用ANSYS建模和LS-DYNA显式动力分析的方式,分别使用HJC、脆性损伤、盖帽和混凝土损伤等4种混凝土本构模型,对钢筋混凝土墩柱的侧向冲击过程进行仿真。从系统能量的角度验证数值计算的正确性;并将冲击过程中的冲击物块加速度和钢筋应变的历时值与试验值进行对比,进一步证实仿真计算的正确性。从各本构模型的计算结果、模拟所耗费的计算时间以及所需的参数数量等方面进行对比。     

网络环境下无人水面艇航向控制器设计

无人水面艇自主航行中受到外部环境干扰及在控制中心-执行器网络通道中存在网络诱导特性(如网络诱导时延、数据丢包等)的影响,会降低系统性能,影响航向控制系统的稳定性.为了能使无人艇按照设定航向快速、稳定地航行,提出一种基于网络的无人艇航向控制策略.首先,建立基于网络的无人艇航向控制系统模型.基于这个模型,运用Lyapunov稳定性理论和凸分析方法导出能使网络环境下无人水面艇航向控制系统渐进稳定的控制律,并设计基于网络的航向控制器.通过仿真验证所提出方法和设计控制器的有效性.