Accounting for traffic speed dynamics when calculating COPERT and PHEM pollutant emissions at the urban scale

Coupling a traffic microsimulation with an emission model is a means of assessing fuel consumptions and pollutant emissions at the urban scale. Dealing with congested states requires the efficient capture of traffic dynamics and their conditioning for the emission model. Two emission models are investigated here: COPERT IV and PHEM v11. Emission calculations were performed at road segments over 6 min periods for an area of Paris covering 3 km². The resulting network fuel consumption (FC) and nitrogen oxide (NOx) emissions are then compared. This article investigates: (i) the sensitivity of COPERT to the mean speed definition, and (ii) how COPERT emission functions can be adapted to cope with vehicle dynamics related to congestion. In addition, emissions are evaluated using detailed traffic output (vehicle trajectories) paired with the instantaneous emission model, PHEM.COPERT emissions are very sensitive to mean speed definition. Using a degraded speed definition leads to an underestimation ranging from −13% to −25% for fuel consumption during congested periods (from −17% to −36% respectively for NOx emissions). Including speed distribution with COPERT leads to higher emissions, especially under congested conditions (+13% for FC and +16% for NOx). Finally, both these implementations are compared to the instantaneous modeling chain results. Performance indicators are introduced to quantify the sensitivity of the coupling to traffic dynamics. Using speed distributions, performance indicators are more or less doubled compared to traditional implementation, but remain lower than when relying on trajectories paired with the PHEM emission model.     

Determinants of ground transport modal choice in long-distance trips in Spain

In transport economics, modeling modal choice is a fundamental key for policy makers trying to improve the sustainability of transportation systems. However, existing empirical literature has focused on short-distance travel within urban systems. This paper contributes to the limited number of investigations on mode choice in medium- and long-distance travel. The main objective of this research is to study the impacts of socio-demographic and economic variables, land-use features and trip attributes on long-distance travel mode choice. Using data from 2007 Spanish National Mobility Survey we apply a multilevel multinomial logit model that accounts for the potential problem of spatial heterogeneity in order to explain long-distance travel mode choice. This approach permits us to compute how the probability of choosing among private car, bus and train varies depending on the traveler spatial location at regional level. Results indicate that travelers characteristics, trip features, cost of usage of transport modes and geographical variables have significant impacts on long-distance mode choice.     

A latent variable representation of count data models to accommodate spatial and temporal dependence: Application to predicting crash frequency at intersections

This paper proposes a reformulation of count models as a special case of generalized ordered-response models in which a single latent continuous variable is partitioned into mutually exclusive intervals. Using this equivalent latent variable-based generalized ordered response framework for count data models, we are then able to gainfully and efficiently introduce temporal and spatial dependencies through the latent continuous variables. Our formulation also allows handling excess zeros in correlated count data, a phenomenon that is commonly found in practice. A composite marginal likelihood inference approach is used to estimate model parameters. The modeling framework is applied to predict crash frequency at urban intersections in Arlington, Texas. The sample is drawn from the Texas Department of Transportation (TxDOT) crash incident files between 2003 and 2009, resulting in 1190 intersection-year observations. The results reveal the presence of intersection-specific time-invariant unobserved components influencing crash propensity and a spatial lag structure to characterize spatial dependence. Roadway configuration, approach roadway functional types, traffic control type, total daily entering traffic volumes and the split of volumes between approaches are all important variables in determining crash frequency at intersections.     

The sequenced activity mobility simulator (SAMS): an integrated approach to modeling transportation, land use and air quality

The persistence of environmental problems in urban areas and the prospect of increasing congestion have precipitated a variety of new policies in the USA, with concomitant analytical and modeling requirements for transportation planning. This paper introduces the Sequenced Activity-Mobility Simulator (SAMS), a dynamic and integrated microsimulation forecasting system for transportation, land use and air quality, designed to overcome the deficiencies of conventional four-step travel demand forecasting systems. The proposed SAMS framework represents a departure from many of the conventional paradigms in travel demand forecasting. In particular, it aims at replicating the adaptative dynamics underlying transportation phenomena; explicitly incorporates the time-of-day dimension; represents human behavior based on the satisficing, as opposed to optimizing, principle; and endogenously forecasts socio-demographic, land use, vehicle fleet mix, and other variables that have traditionally been projected externally to be input into the forecasting process.     

基于GIS的Logistic回归在区域滑坡空间预测中的应用

巫山新址西区作为试验区,选取地形地貌、岩性特征、地质构造等区域斜坡稳定性影响因子,以MAPGIS地理信息系统为技术支撑,将全区按10m×10m方格划分为14450个单元,每个格网单元作为一个样本,建立Logistic回归模型,进行区域滑坡空间预测。结果表明:以滑坡发生概率0.163为判据,试验区内发生滑坡地段的判对率为72.08%,不发生滑坡地段的判对率为81.44%。根据计算结果可以得到区域斜坡稳定性分区以及进一步的地质灾害风险评价。     

大跨径连续刚构桥的随机地震动响应分析

以苏通长江大桥辅航道桥为工程背景,考虑结构自重引起几何非线性以及桩土相互影响,建立该桥的地震分析模型,分析行波效应、部分相干效应和局部场地效应对结构地震响应的影响规律。结果表明:行波效应总体上削弱结构的位移响应,对内力响应的影响较大,在相位差为1s的情况下,面内弯矩响应的增幅达到25%;局部场地效应对内力及位移响应的影响均较大;相干效应削弱桥梁主墩的弯矩响应。     

Use of ecological footprinting to explore alternative transport policy scenarios in an Irish city-region

The objective of this paper is to compare the ecological footprint for travel-commuting patterns for the residents of an Irish city-region, that is Limerick city-region, in 1996 and 2002. Scenario building, based on ecological footprint analysis, is used to estimate the impact of different policy choices for 2010. The optimal policy mix for sustainable travel is proposed and consists of a mix of reduced demand through travel demand measures, better spatial planning and technological improvements in fuel economy.     

A comparison between PARAMICS and VISSIM in estimating automated field‐measured traffic conflicts at signalized intersections

The main objective of this study is to investigate the relationship between field‐measured conflicts and simulated conflicts estimated from microsimulation model (PARAMICS) using the surrogate safety assessment model. An urban signalized intersection was selected for analysis. Automated video‐based computer vision techniques were used to identify field conflicts. The applicability of a two‐step model calibration procedure applied to VISSIM in a recent study was investigated using PARAMICS. In the first calibration step, the PARAMICS model was calibrated to ensure that the simulation gives reasonable results of average delay times. The second calibration step used a genetic algorithm procedure to calibrate PARAMICS parameters to enhance the correlation between simulated and field‐measured conflicts. Finally, the results obtained from PARAMICS were compared with results obtained from VISSIM. The comparison included three aspects: (i) the car‐following model and safety‐related parameters; (ii) the correlation between simulated and field‐measured conflicts; and (iii) the conflict spatial distributions. The results show that the default simulation model parameters give poor correlation with the field‐measured data, and therefore, using simulation models without a proper calibration should be avoided. Overall, good correlation between field‐measured and simulated conflicts was obtained after calibration for both models, especially at higher time‐to‐collision (TTC) values. At TTC threshold of 1.5 s, PARAMICS overestimates the number of conflicts and VISSIM underestimates it. Both models overestimated the number of conflicts at TTC threshold of 3.00 s. There were major differences between field‐measured and simulated conflicts spatial distributions for both simulation models. This indicates that despite the good correlation obtained from the calibration process, both PARAMICS and VISSIM do not capture the actual conflict occurrence mechanism. Copyright © 2016 John Wiley & Sons, Ltd.     

Integrating a traffic router and microsimulator into a land use and travel demand model

Abstract

This paper describes one of the first known attempts at integrating a dynamic and disaggregated land-use model with a traffic microsimulator and compares its predictions of land use to those from an integration of the same land-use model with a more traditional four-step travel demand model. For our study area of Chittenden County, Vermont, we used a 40-year simulation beginning in 1990. Predicted differences in residential units between models for 2030 broken down by town correlated significantly with predicted differences in accessibility. The two towns with the greatest predicted differences in land use and accessibility are also the towns that currently have the most severe traffic bottlenecks and poorest route redundancy. Our results suggest that this particular integration of a microsimulator with a disaggregated land-use model is technically feasible, but that in the context of an isolated, small metropolitan area, the differences in predicted land use are small.     

一座变截面连续箱梁桥简支端剪应力偏载系数分析

箱形截面近年来得到广泛应用,但建成后通过一定时间的运营,发现箱梁腹板普遍开裂,国内外进行了大量的研究与分析。通过对一座预应力混凝土变截面连续箱梁桥实例,通过空间有限元分析计算,发现简支端的最大剪应力与边跨跨中的正应力偏载系数远比经验值大,可为类似工程提供参考。