基于ADINA的水润滑轴承结构改进研究

应用有限元软件ADINA分别建立了传统水润滑橡胶轴承及其改进结构的CFD和FSI模型,分析比较水流轴向流速、轴的周向转速等参数对轴瓦变形和水膜压力分布的影响规律。计算结果表明：本文提出的轴承改进结构承载力较传统的水润滑轴承提高20%。具有较好的工程应用前景。     

Structure Model of Urban Traffic System Evolution

A structure model of urban traffic system evolution is built based on the analysis of the factors influencing the system evolution and the hierarchy between the factors. Then the influencing degrees of the factors are quantificationally analyzed by DEMATE (decision making trial and evaluation laboratory). The analysis results indicate that the traffic mode structure which achieves the highest central degree is the dominant influencing factor of the urban traffic system evolution, and that economy development and the traffic poficy axe the second important factors that also affect the traffic mode structures. Furthermore, physical geography is a basic restriction to the urban traffic system evolution.     

FEMUR SHAPE RECOVERY FROM VOLUMETRIC IMAGES USING 3-D DEFORMABLE MODELS

IntroductionThe rupture of the anterior cruciate ligament( ACL) has become the most common knee in-juries.In operation of ACL reconstruction,thesurgeons have to find the optimal attachmentpoints resulting in a low anisometry of the graft,while preventing impingement between the graftand the femoral notch.Markus Fleute andStéphane lavallée[1] proposed a real- time systemfor computer- assisted ACL surgery.A recentadvance in surgery is minimally invasive tech-nique that can avoid the large…     

DESIGN OF A NEW INTERPOLATED CONTROLLER FOR STABILIZATION OF A SET OF INTERPOLATED PLANTS

IntroductionDynamics of almost all plants in reality variesaccording to the condition under which the plantis operated.An idea to describe the variation ofplant dynamics is interpolating a number of rep-resentative models defined at representative op-erating points.In Ref. [1 ] ,the plant was as-sumed to described as a linear interpolation ofproper stable coprime factorizations of transferfunctions of two representative models and thestabilization problems have been considered. InRef.[2 ] ,it…     

英语词汇层面上的理解在阅读中的作用

英语阅读教学在我国英语教学中占有重要地位。词汇是阅读理解的基础,处理词汇的能力也是提高总体阅读水平的重要组成部分。作从理论上对词汇层面理解技能的本质、组成、目的及功能进行了探讨。并以实验结果证明、揭示了词汇层面理解与阅读过程中局部理解的关系,指出理解词的字面意义、功能意义、语境意义、及引申意义的重要性,并论证了在语言教学中加强词汇理解技能训练的重要地位。     

Design optimization of a TetraSpar-type floater and tower for the IEA Wind 15 MW reference wind turbine

We present an optimization study for the conceptual design of wind turbine floaters of the TetraSpar type. The optimization variables include all geometric dimensions of the floater, keel, mooring lines and tower design. A gradient based optimization method is applied to a mass proportional objective cost function. The objective function accounts for the different weight components of the floater, including secondary steel, the wind turbine tower, and the mooring system. A frequency domain response method is utilized, so that each design evaluation also takes into account the dynamic response for 12 wind speeds with associated wave conditions. Nineteen constraints are applied for static and dynamic response, natural frequencies, and fatigue at the bottom of the tower. Two reference designs are presented, namely one with a soft–stiff tower and one with a stiff–stiff tower. Due to the anti-phase coupling of the floater pitch and tower vibration, the soft–stiff tower needs a stronger floater stiffness in pitch. This design thus has a larger water plane area moment than the more compact stiff–stiff floater, which is found to be the least economical. A constraint analysis is next presented based on Lagrange multipliers and a relative cost index. We find that the strongest cost influence is exerted by the 3P tower frequency constraint for the stiff-stiff and soft-stiff designs. Finally, a third design variant with a free optimizable tower frequency is introduced. This design is found to be 11% cheaper than the soft–stiff design and highlights the potential cost savings of tower designs within the 3P region.     

船舶中央空调系统的构造分析及选择原则

本文通过对船舶中央空调系统构造进行分析,结合中央空调装置在船上的实践使用,提出一些建议.为建造新船的空调选型提供参考。     

新建地铁车站零距离下穿既有线区间影响分析

暗挖隧道下穿既有地铁施工,势必会引起既有地铁结构附加变形和差异沉降,影响其结构及运营安全,需要进行变形和内力分析,以便采取必要保护措施.文章以某暗挖车站密贴下穿既有地铁区间为例,采用FLAC3D和SAP 2000模拟,分析既有地铁区间变形和内力发展规律,评价结构和运营安全受影响的程度,为安全保护提供决策依据.     

改进的道路交通安全灰色聚类评价方法

传统的灰色聚类评价方法在确定灰类白化值时,由于受到样本数据的约束,使得评价只是在样本范围内进行比较,没有真正达到评价的目的。针对这一不足,对传统的灰色聚类评价方法进行改进,通过确立合理有效的评价指标体系,并通过相关规范标准确定灰类白化值,改变传统方法确立灰类白化值的模式,以获得一个更加合理的评价标准,使评价结果更加准确、合理。改进的灰色聚类评价方法有理论依据、算法简单、可操作性强,评价结果能更好的反映道路交通安全状况。将该方法用于3个城市的道路交通安全评价,取得了良好的效果。     

基于手机传感器数据的出行特征提取方法

手机调查方法的已有研究较多集中于基于手机信令数据的宏观出行特征获取,而手机传感器数据在个体出行链微观出行特征提取方面具有优势.针对城市居民多采用组合交通方式出行的特征,研发智能手机应用软件,实现GPS数据(位置坐标与速度)、加速度计、服务基站、WiFi等传感器数据采集.运用小波分析、神经网络等数据挖掘技术分析不同交通方式出行数据差异,探索多种数据挖掘算法用于个体出行参数提取的可行性及效果.结合实际案例,总结应用手机传感器数据进行出行特征精细化提取的难点和技术关键.最后,探讨精细化个体出行数据在交通模型和理论优化方面的应用.