沥青路面填封裂缝和修补坑槽再破损原因分析

为了检验沥青路面裂缝填封和坑槽修补的效果,对填封裂缝和修补坑槽较常出现的再破损形式进行了归纳,并深入地分析了已填封裂缝和已修补坑槽再次出现破损的原因.     

The desulphurisation of shipping: Past,present and the future under a global cap

As from January 2020, the International Maritime Organization (IMO) is implementing a global 0.5% limit on the sulphur content of fuel, commonly known as the global sulphur cap. This limit is the latest policy in the efforts to reduce sulphur emissions from shipping, following the designation of emission control areas (ECAs) and other regional regulations. In this paper, a literature review is conducted of academic studies that have dealt with issues relating to the reduction of maritime sulphur emissions. Various recurring research themes are identified, spanning the areas of operations research, maritime economics and transport policy. The effects and implications of available compliance options are then analyzed from the perspectives of ship operators, shippers and consumers. Using lessons learned from the enforcement of ECA regulations, this is followed by an appraisal of various potential issues related to the enforcement of these new global regulations. It is found that a homogeneous enforcement regime is required to ensure a level playing field amongst ship operators and that the global sulphur cap may lead to serious market distortion, due to the potential short term rise of fuel prices. The paper concludes with a set of recommendations for future research on sulphur emissions from shipping in the aftermath of the global cap and, looking forward, to its relationship to the IMO strategy on the reduction of greenhouse gas (GHG) shipping emissions.     

Compliance with MARPOL Annex VI regulation 14 by ships in the Gulf of Guinea sub-region: Issues,challenges and opportunities

The negative environmental and health impacts association with high sulphur dioxide emissions from shipboard machineries have been raised by various stakeholders within the marine transportation sector. It is against this backdrop that the International Maritime Organisation under the MARPOL Annex VI regulation 14 has capped sulphur emission to 0.1% for Sulphur Emission Control Areas and 0.5% for the other shipping nations. However, ship owners in the Gulf of Guinea (GoG) sub-region are facing multitudes of challenges in meeting up with this new IMO regulation. This paper aims to identify the main barriers hampering effective compliance to this new regulation by ships operating in the GoG, rank the barriers, and then discuss the possible opportunities that may arise as a result of addressing the challenges. To identify the main barriers, experts with several years of experience in the maritime industry from Ghana and Cameroun were used while multi-criteria decision-making (MCDM) method combining analytic hierarchy process (AHP) and technique for order preference by similarity to ideal solution (TOPSIS) was employed to rank the barriers. Other methods such as fuzzy AHP (FAHP), rank-order centroid (ROC) and TOPSIS were combined to validate the result of the study. The findings indicate that lack of infrastructure, lack of comprehensive marine air pollution laws and high capital and operational costs of sulphur reduction solutions emerged as the top three ranked barriers. The findings of this study can be useful to ship owners and policy makers in dealing with the issues of marine air pollution.     

含碎石化层的沥青加铺路面结构分析

利用ABAQUS有限元软件建立了含碎石化层的沥青加铺路面结构模型,研究土基、旧路基层与碎石化层模量以及碎石化层和加铺层厚度对含碎石化层沥青加铺层路面结构的力学响应的影响,确定碎石化模量的控制范围.结果表明,荷载作用中心点及附近一定区域,沥青加铺层层底受拉;沥青加铺层层底拉应力对土基模量、旧路基层模量、碎石化层厚度不敏感,但当碎石化层模量较小(接近300MPa)或加铺层厚(大于20cm)时层底拉应力均较大,在重载作用下更大.因此碎石化道路必须验算沥青层层底拉应力指标.为使沥青层层底拉应力峰值不至于过大甚至超过容许拉应力,使得受拉区域控制在一定范围以内,同时为降低加铺层竖向剪应力及土基顶面压应变,并达到防治反射裂缝的效果,碎石化层的模量宜控制在500～1000MPa.     

高速公路沥青路面施工质量控制分析

无接缝、平整、行车舒适、噪音低以及振动小、易于养护等优点,使沥青混凝土路面成为我国国内公路面层普遍采用的一种比较好的结构形式。但是如果施工中不能按照施工工艺严格的进行施工质量控制,则很容易导致路面的一系列质量问题,这不仅影响使用功能,还影响影响其社会效益。     

公路沥青混凝土路面施工质量控制措施探析

沥青是我国用于公路路面铺设的典型材料.对沥青混凝土路面施工质量控制进行分析,并提出相应的施工质量控制措施,为施工企业提供借鉴.     

冷铺沥青材料的特性与配制技术

用冷铺沥青混合料修补路面坑洞,具有方便、快捷等优点.为保证其疏松性和压实性,在配制方法上,如所用沥青的粘度、沥青的用量、添加剂以及集料级配等,与热拌沥青混合料都有很大区别.实践表明,所研制开发的冷铺材料使用性能良好,而成本却比同类进口材料大大降低.     

高模量沥青混凝土技术的应用

详细阐述了高模量沥青混凝土的的优点、外掺剂的作用机理,通过生产过程,确定了高模量沥青混凝土的级料配合比、外掺剂的掺配比例、拌和温度以及摊铺温度的各项生产指标,生产出高模量沥青混凝土,使沥青路面的高温抗车辙能力大大增强.     

浅谈SEAM沥青混合料的施工工艺

介绍SEAM粒料的掺配方法、掺配比例的确定和SEAM沥青混合料的施工工艺。     

探讨沥青路面局部渗水的原因及处理方法

通过武汉市汉蔡高速公路沥青路面出现的局部渗水现象,分析沥青路面产生局部渗水的原因及处理的必要性,提出对沥青路面局部渗水的处理原则及处理方法。