GLOBAL MEASURE ON IMAGE CONTENT

IntroductionContent- based image retrieval has been proposedto allow retrieval to be performed on the basis ofa variety of aspects of image content[1] .A chal-lenging problem arises with many imagedatabases,within which queries are posed via vi-sual or pictorial examples.A common visualquery to an image database system would involvefinding all images in the database which containa subimage that is similar to the query image.Such retrievals must be based on embedded con-tent features,such as sh…     

肺癌患者外周血T细胞亚群及免疫细胞活性的研究

采用 APAAP法和流式细胞仪研究 32例肺癌患者及 30例健康人外周血T细胞亚群及免疫细胞活性 ( NK- A)的变化。结果表明 :肺癌患者外周血 CD+3 、CD+4、CD+4/CD+8及 NK- A与正常人比较呈显著性降低 ( P <0 .0 5 ,P <0 .0 1 ) ;且肺癌伴癌转移者与未转移者上述各项指标亦有显著性差异 ( P <0 .0 5 )。说明肺癌患者存在细胞免疫功能降低 ;伴有癌转移的肺癌患者细胞免疫功能更低。提出积极调节肺癌患者细胞免疫功能 ,增强机体抗肿瘤能力十分重要。     

基于USB和FPGA的数据采集系统设计

文章从系统总体结构、硬件设计和软件设计三个方面阐述基于USB和FPGA的多通道同步数据采集与处理系统的设计方法。系统采用FPGA作为主控芯片,实现了A/D转换芯片的控制、数据在双SRAM中的乒乓缓冲控制以及和USB接口芯片CY7C68013A的通信控制。通过USB驱动程序,动态链接库和LabVIEW实现了上位机中数据的显示,处理与存储。该系统能够满足多通道同步数据采集的要求。     

AK-16A 配合比设计准则研究

AK-16A是广东省沥青混凝土路面抗滑磨耗层的典型结构,抗滑磨耗层的关键技术问题是抗滑和密水,而抗滑与密水是一对矛盾,由于实践经验不足,致使水损害成了广东省高速公路沥青混凝土路面的主要病害之一。为进一步提高广东省抗滑磨耗层配比设计水平,克服水损害,本文着重研究了AK-16A抗滑磨耗层混合料级配曲线位置和形状对混合料马歇尔指标的影响,归纳出抗滑磨耗层配比设计准则。     

用SPCE061A实现语音录放功能

SPCE061A不但具有单片机的基本功能,而且在语音识别和处理方面有其独到之处,开发环境简单,应用广泛.文中从硬件和软件两个方面介绍了实现语音录放功能的方法,经过调试,达到预期目标.     

电动四轮转向汽车电子差速问题研究

介绍了四轮转向技术和新兴的纯电子差速技术,讨论了四轮转向汽车差速问题的特殊性;建立了基于阿克曼原理的四轮转向低速差速模型;设计了基于TMS320LF2407A DSP的四轮转向及其转向差速电子控制系统,并进行软件编程初步实验,验证了四轮转向技术和电子差速技术的可行性。     

长安奔奔（CV6）空调系统控制电路

长安奔奔轿车是重庆长安汽车有限公司于2006年10月投放市场的一款A0级家用轿车,自投放市场以来。先后推出了运动款、自动档,在2008年又推出了新装版和1．0L排量的奔奔轿车。为了帮助维修人员更好地维修该车空调系统,下面就其空调系统控制线路作一介绍。     

基于VC＋＋的双筒武减振器外特性仿真软件开发

根据双筒式减振器的结构特点,依据流体力学和材料力学,总结前人所建立的数学模型,基于VC＋＋开发出双筒式减振器外特性仿真分析软件,通过获取双筒式减振器的重要结构尺寸,输入相关参数,软件可根据内置模型分析出双筒式减振器的外特性——示功特性和速度特性,为减振器设计提供理论参考。     

基于热化学轴对称烧蚀的仿真

基于烧蚀理论与计算机语言设计了固体火箭喷管烧蚀软件的主程序及系统框架.火箭喷管烧蚀是在高温高压冲刷氧化气流作用下发生的,利用极端环境下的热化学烧蚀模型,通过Fortran编程对喷管内热流场及烧蚀进行数值计算,并结合Matlab与VC＋＋自身的特点,采用混合编程技术实现火箭烧蚀软件的前后处理.由算例可知,该软件能够对喷管烧蚀进行仿真,并能够脱离编译环境在Windows平台上使用,使初始参数输入界面化,数值解图形化.     

Recycling of aluminum from fibre metal laminates

Recycling of aluminum alloy scrap obtained from delaminated fibre metal laminates (FMLs) was studied through high temperature refining in the presence of a salt flux. The aluminum alloy scrap contains approximately mass fraction w(Cu) = 4.4%, w(Mg) = 1.1% and w(Mn) = 0.6% (2024 aluminum alloy). The main objective of this research is to obtain a high metal yield, while maintaining its original alloy compositions. The work focuses on the metal yield and quality of recycled Al alloy under different refining conditions. The NaCl-KCl salt system was selected as the major components of flux in the Al alloy recycling. Two different flux compositions were employed at NaCl to KCl mass ratios of 44:56 and 70:30 respectively, based on either the eutectic composition, or the European preference. Different additives were introduced into the NaCl-KCl system to study the effect of flux component on recycling result. Although burning and oxidation loss of the alloying elements during re-melting and refining take place as the drawbacks of conventional refining process, the problems can be solved to a large extent by using an appropriate salt flux. Experimental results indicate that Mg in the alloy gets lost when adding cryolite in the NaCl-KCl salt system, though the metal yield can reach as high as 98%. However, by adding w(MgF₂) = 5% into the NaCl-KCl salt system (instead of using cryolite) all alloying elements were well controlled to its original composition with a metal yield of almost 98%.