Socially optimal electric driving range of plug-in hybrid electric vehicles

This study determines the optimal electric driving range of plug-in hybrid electric vehicles (PHEVs) that minimizes the daily cost borne by the society when using this technology. An optimization framework is developed and applied to datasets representing the US market. Results indicate that the optimal range is 16 miles with an average social cost of $3.19 per day when exclusively charging at home, compared to $3.27 per day of driving a conventional vehicle. The optimal range is found to be sensitive to the cost of battery packs and the price of gasoline. When workplace charging is available, the optimal electric driving range surprisingly increases from 16 to 22 miles, as larger batteries would allow drivers to better take advantage of the charging opportunities to achieve longer electrified travel distances, yielding social cost savings. If workplace charging is available, the optimal density is to deploy a workplace charger for every 3.66 vehicles. Moreover, the diversification of the battery size, i.e., introducing a pair and triple of electric driving ranges to the market, could further decrease the average societal cost per PHEV by 7.45% and 11.5% respectively.     

刚构桥0#块混凝土水化热温度场改值模拟分析

文章结合罗天乐连续刚构桥施工实例,运用有限元模型对该桥0#块混凝土浇筑施工过程中的温度场变化情况进行了数值模拟分析。结果表明,0#块混凝土内部最高温度及最大内外温差计算值与实测值吻合较好。     

内外温差对明挖隧道主体结构内力的影响研究

明挖隧道内外温差会使其衬砌结构产生附加应力,严重时会使隧道轴线方向的衬砌产生环向裂缝。通过对温度进行现场监测,获得工程实际内外温差,对其规律进行简要分析并将其作为有限元计算的温度边界条件;采用ANSYS进行有限元计算,考虑明挖隧道主体结构修建完成和回填完成两个阶段,对隧道内部温度低于外部温度、隧道内部温度高于外部温度以及无温差3种工况进行分析,得出温差对隧道结构应力的影响规律。     

基于层次分析法的区间估计的车站能力查定误差因子分析研究

本文归纳总结了车站能力查定计算过程中存在的多种影响因素,深入分析了其产生原因和不可避免性。然后利用层次分析法的区间估计方法计算得出各种误差因子对计算结果的影响权重大小,并对比不同误差因子的权重区间,筛选出强误差因子,剔除弱误差因子,为精确计算车站能力值提供依据。     

Instantaneous communication throughputs of vehicular ad hoc networks

Vehicular ad hoc networks (VANETs) formed by connected vehicles in a traffic stream could be applied to improve safety, mobility, and environmental impacts of a transportation system. In this paper, we present analytical models for the instantaneous communication throughputs of VANETs to measure the efficiency of information propagation under various traffic conditions at a time instant. In particular, we define broadcast and unicast communication throughputs by the wireless channel bandwith multiplied by the average probabilities that one vehicle is a successful receiver and sender in a VAENT, respectively. With a protocol communication model, we derive formulas to determine the probabilities for an equipped vehicle to be a successful broadcast receiver and a successful unicast receiver/sender, and obtain broadcast and unicast throughputs along discrete and continuous traffic streams. We further examine the impacts on communication throughputs of the transmission range and the interference range of dedicated short range communication devices as well as the market penetration rate of equipped vehicles and the percentage of senders. Finally, we investigate the influence of shock waves on communication throughputs.     

Using GPS-data to determine optimum electric vehicle ranges: A Michigan case study

Fuel-switching personal transportation from gasoline to electricity offers many advantages, including lower noise, zero local air pollution, and petroleum-independence. But alleviations of greenhouse gas (GHG) emissions are more nuanced, due to many factors, including the car’s battery range. We use GPS-based trip data to determine use type-specific, GHG-optimized ranges. The dataset comprises 412 cars and 384,869 individual trips in Ann Arbor, Michigan, USA. We use previously developed algorithms to determine driver types, such as using the car to commute or not. Calibrating an existing life cycle GHG model to a forecast, low-carbon grid for Ann Arbor, we find that the optimum range varies not only with the drive train architecture (plugin-hybrid versus battery-only) and charging technology (fast versus slow) but also with the driver type. Across the 108 scenarios we investigated, the range that yields lowest GHG varies from 65 km (55+ year old drivers, ultrafast charging, plugin-hybrid) to 158 km (16–34 year old drivers, overnight charging, battery-only). The optimum GHG reduction that electric cars offer – here conservatively measured versus gasoline-only hybrid cars – is fairly stable, between 29% (16–34 year old drivers, overnight charging, battery-only) and 46% (commuters, ultrafast charging, plugin-hybrid). The electrification of total distances is between 66% and 86%. However, if cars do not have the optimum range, these metrics drop substantially. We conclude that matching the range to drivers’ typical trip distances, charging technology, and drivetrain is a crucial pre-requisite for electric vehicles to achieve their highest potential to reduce GHG emissions in personal transportation.     

动力定位船舶全速度路径跟踪CB导引自适应闭环控制

针对仅使用槽道推进器提供横向推力的动力定位船舶路径跟踪控制问题,建立慢变环境干扰影响下的非线性船舶数学模型,设计带有自适应干扰补偿的反步控制算法来消除环境干扰的影响。引入平行目标接近(CB)导引算法为跟踪控制生成期望速度矢量信号,通过与所提出的自适应反步控制算法相结合,得到不受船舶驱动特性限制的全速度范围动力定位船舶导引跟踪控制算法,应用李雅普诺夫稳定性理论证明系统跟踪误差渐进收敛到零。仿真结果表明通过调整导引算法参数可以调节船舶跟踪过程表现,并可以得到较好的控制精度。     

拱墩降温对大跨桥上连续式无砟轨道竖向位移影响分析

受季节和日照的影响,高墩大跨拱桥混凝土结构会出现膨胀现象,从而引起桥墩顶部竖向位移的变化。为了研究拱墩降温对高墩大跨拱桥上连续式无砟轨道竖向位移和高低不平顺的影响,根据桥上连续式无砟轨道的结构和受力特征,参考国内某大跨度上承式钢筋混凝土拱桥的实际参数,利用有限元方法,建立线-桥-墩一体化模型,分析拱墩降温对大跨拱桥上连续式无砟轨道的竖向位移和高低不平顺的影响。结果表明:拱墩降温引起的大跨桥上线路竖向位移较明显,设计时不可忽略;拱墩降温会引起线路高低不平顺,且对长波不平顺影响最严重;线路高低不平顺随降温幅度增加而增大,在年温差较大的地区目前不建议高墩大跨拱桥与连续式无砟轨道配合设计使用。     

自卸式远洋散装水泥运输船特殊结构强度分析研究

以远洋散装水泥运输船为研究对象,采用三维有限元分析方法及ＤＮＶ船级社的ＳＥＳＡＭ结构计算软件,从船体结构强度、船舶振动预报和船体结构温度应力等方面对该型船结构设计的多项技术难点进行了详细的计算和评估。并且着重对大型散装水泥运输船间断内底板、中纵舱壁以及高腹板旁桁材等特殊结构的受力状态及应力分布进行分析和探讨。为自卸式散装水泥运输船的结构优化设计提供技术支撑。     

海洋环境对机载雷达探测的影响分析

文章针对雷达方程,分析了海洋环境因素对机载雷达探测距离的影响,建立了雷达探测距离误差模型,为机载雷达性能的判断和目标的检测提供了参考。