刚架拱桥的检测与承载能力评定

对某缺失资料的刚架拱桥进行了病害调查、无损检测及荷载试验,重点对荷载试验进行了分析.通过对结构加载模拟分析、加载等级与方式的确定、变形和自振频率的实测与分析,表明该桥的承载能力不满足规定的荷载等级,且动力性能较差,需要进行加固维修.此方法为该类桥梁的维护使用和加固改造提供参考.     

自升式风电安装平台插桩过程中的耦合作用

以某自升式风电安装平台和其临近的固定平台为研究对象,探讨风电安装平台桩靴入泥带来的挤土荷载与环境荷载的耦合作用对平台桩基强度的影响。分析结果表明:在靠近泥面一定范围之内,在进行导管架钢桩设计时必须考虑挤土荷载与环境荷载的耦合作用,以满足导管架平台桩基的强度要求。     

Noise level in the vicinity of signalized roundabouts

The analysis, assessment and estimation of noise levels in the vicinity of intersections is a more complex problem than a similar analysis for roads and streets. This is due to the varied geometry of the intersections, differences in the loads of individual movements, participation of heavy vehicles and mass transport vehicles, as well as the various types of traffic management and traffic control. This article analyses the influence of intersection type and traffic characteristics on the noise levels in the vicinity of classic channelized intersections with signalization, roundabouts and signalized roundabouts. Based on the conducted measurements, it has been established that, with comparable traffic parameters and the same distance from the geometric centre of the intersection, the L_Aeq value for signalized roundabouts is 2.5–10.8 dB higher in comparison to classic channelized intersections with signalization and 3.3–6.7 dB higher in relations to the analysed roundabout. Additionally the differences between L_Aeq levels at individual entries at the same signalized roundabouts may reach the value of approximately 4.5 dB. Such situation is influenced by differences in the intersection geometry, diameter of the intersection’s central island, traffic flow type, traffic management at the entries and traffic volume, especially the amount and traffic movements of multiple axle heavy vehicles. These factors have been analysed in detail in relation to signalized roundabouts in this paper.     

基于负荷敏感技术的调距桨控制系统设计

探讨调距桨控制问题,提出了基于负荷敏感技术的调距桨控制系统设计方法,设计了积分分离式PID控制算法．应用结果表明,积分分离式PID控制算法用于负载敏感技术的调距桨回路控制是有效的．     

初始缺陷对耐压圆柱壳结构极限承载力的影响

为了考察初始缺陷、材料等因素对耐压圆柱壳结构极限承载力的影响,本文利用ANSYS有限元软件构造模型对耐压圆柱壳结构进行模拟．研究了缺陷幅值在一定范围内变化时,初始缺陷对耐压圆柱壳极限承载力的影响,并将有限元计算结果与理论计算结果进行比较,讨论了材料的改变对极限承载力的影响．初始缺陷幅值不会改变耐压圆柱壳结构的失稳模态,且对结构极限承载力的影响有限,但材料的改进对提高结构极限承载力的效果显著．     

Numerical simulations of fatigue crack initiation and propagation based on re-tensile plastic zone generating load criterion for in-plane gusset welded joints

Many accidents are caused by fatigue in welded built-up steel structures, and so it is important to estimate the fatigue lives of such structures quantitatively for safety reasons. By assuming that fatigue cracks cannot grow without an accumulation of alternating tensile/compressional plastic strain, one of the authors identified an improved effective stress intensity factor range ΔK _RPG based on the re-tensile plastic zone generating (RPG) load, which represents the driving force for fatigue cracks, and suggested that ΔK _RPG should be used as the parameter to describe fatigue crack growth behavior. The “FLARP” numerical simulation code in which ΔK _RPG is implemented as the fatigue crack growth parameter, was developed in order to predict fatigue crack initiation and propagation behavior. In this paper, it is demonstrated that FLARP gives accurate estimates for fatigue life by comparing the estimated fatigue crack growth curves and S–N curves with the experimental results for in-plane gusset welded joints, which are used in many welded steel structures. Moreover, the effect of induced bending moment due to the linear misalignment in the out of plane direction on the fatigue strength of in-plane gusset welded joints is investigated through numerical simulations.     

静载锚固性能试验影响因素分析

结合铁路工程钢绞线一锚具组装件的静载锚固性能试验检测,对影响试验结果的各种因素进行了分析,并指出相应的解决措施。提出试验过程的有效控制是试验科学性和数据结果可靠性的有力保证。     

机动车超速行驶防范对策分析

机动丰超速行驶是引起交通事故的主要原因,是严重的道路交通违法行为之一。机动丰超速是由于驾驶人没有及时纠正驾驶过程中的误判、误动的结果。引起超速的原因包括驾驶人、机动车、交通安全设施和其他因素四个方面,应从教育培训、法律、交通安全设施、交通科技四个方面采取措施预防超速。     

超大型自航抓斗挖泥船作业流程载荷分析

以大型自航抓斗挖泥船为研究对象,建立相应的水动力计算模型。主要研究抓斗挖泥作业不同阶段下船舶运动、锚泊线受力情况以及其随不同环境载荷的变化规律,为船舶安全作业提供依据。研究结果表明,船舶在抓斗旋转和卸料时最为危险,船舶横荡、横摇及各锚泊线张力受其影响很大,实际作业时应尽量保持迎浪状态,进而确保船舶作业安全。     

In search of surrogate safety indicators for vulnerable road users: a review of surrogate safety indicators

Surrogate indicators are meant to be alternatives or complements of safety analyses based on accident records. These indicators are used to study critical traffic events that occur more frequently, making such incidents easier to analyse. This article provides an overview of existing surrogate indicators and specifically focuses on their merit for the analyses of vulnerable road users and the extent to which they have been validated by previous research. Each indicator is evaluated based on its ability to consider the collision risk, which can be further divided into the initial conditions of an event, the magnitude of any evasive action and the injury risk in any traffic event. The results show that various indicators and their combinations can reflect different aspects of any traffic event. However, no existing indicator seems to capture all aspects. Various studies have also focused on the validity of different indicators. However, due to the use of diverse approaches to validation, the large difference in how many locations were investigated and variations in the duration of observation at each location, it is difficult to compare and discuss the validity of the different surrogate safety indicators. Since no current indicator can properly reflect all the important aspects underlined in this article, the authors suggest that the choice of a suitable indicator in future surrogate safety studies should be made with considerations of the context-dependent suitability of the respective indicator.