Identifying optimal data aggregation interval sizes for link and corridor travel time estimation and forecasting

With the recent increase in the deployment of ITS technologies in urban areas throughout the world, traffic management centers have the ability to obtain and archive large amounts of data on the traffic system. These data can be used to estimate current conditions and predict future conditions on the roadway network. A general solution methodology for identifying the optimal aggregation interval sizes for four scenarios is proposed in this article: (1) link travel time estimation, (2) corridor/route travel time estimation, (3) link travel time forecasting, and (4) corridor/route travel time forecasting. The methodology explicitly considers traffic dynamics and frequency of observations. A formulation based on mean square error (MSE) is developed for each of the scenarios and interpreted from a traffic flow perspective. The methodology for estimating the optimal aggregation size is based on (1) the tradeoff between the estimated mean square error of prediction and the variance of the predictor, (2) the differences between estimation and forecasting, and (3) the direct consideration of the correlation between link travel time for corridor/route estimation and forecasting. The proposed methods are demonstrated using travel time data from Houston, Texas, that were collected as part of the automatic vehicle identification (AVI) system of the Houston Transtar system. It was found that the optimal aggregation size is a function of the application and traffic condition.

Time taken for residents to adopt a new public transport service: examining heterogeneity through duration modelling

When a new public transport service is introduced it would be valuable for public authorities, financing organisations and transport operators to know how long it will take for people to start to use the service and what factors influence this. This paper presents results from research analysing the time taken for residents living close to a new guided bus service to start to use (or adopt) the service. Data was obtained from a sample of residents on whether they used the new service and the number of weeks after the service was introduced before they first used it. Duration modelling has been used to analyse how the likelihood of starting to use the new service changes over time (after the introduction of the service) and to examine what factors influence this. It is found that residents who have not used the new service are increasingly unlikely to use it as time passes. Those residents gaining greater accessibility benefits from the new service are found to be quicker to use the service, although the size of this effect is modest compared to that of other between-resident differences. Allowance for the possibility that there existed a proportion of the sample that would never use the new service was tested using a split population model (SPD) model. The SPD model indicates that 36% of residents will never use the new service and is informative in differentiating factors that influence whether Route 20 is used and when it is used.

The determinants of long distance travel in Great Britain

This study analyses of the determinants of long distance travel in Great Britain using data from the 1995-2006 National Travel Surveys (NTSs). The main objective is to determine the effects of socio-economic, demographic and geographic factors on long distance travel. The estimated models express the distance travelled for long distance journeys as a function of income, gender, age, employment status, household characteristics, area of residence, size of municipality, type of residence and length of time living in the area. A time trend is also included to capture common changes in long distance travel over time not included in the explanatory variables. Separate models are estimated for total travel, travel by each of four modes (car, rail, coach and air), travel by five purposes (business, commuting, leisure, holiday and visiting friends and relatives (VFRs)) and two journey lengths (<150 miles and 150+ miles one way), as well as the 35 mode-purpose-distance combinations.The results show that long distance travel is strongly related to income: air is most income-elastic, followed by rail, car and finally coach. This is the case for most journey purposes and distance bands. Notable is the substantial difference in income elasticities for rail for business/commuting as opposed to holiday/leisure/VFR. In addition, the income elasticity for coach travel is very low, and zero for the majority of purpose-distance bands, suggesting coach travel to be an inferior mode in comparison to car, rail and air. Regarding journey distance, we find that longer distance journeys are more income elastic than shorter journeys.For total long distance travel, the study indicates that women travel less than men, the elderly less than younger people, the employed and students more than others, those in one adult households more than those in larger households and those in households with children less than those without. Long distance travel is also lowest for individuals living in London and greatest for those in the South West, and increases as the size of the municipality declines.     

Value of travel time reliability: A review of current evidence

Travel time reliability is a fundamental factor in travel behavior. It represents the temporal uncertainty experienced by travelers in their movement between any two nodes in a network. The importance of the time reliability depends on the penalties incurred by the travelers. In road networks, travelers consider the existence of a trip travel time uncertainty in different choice situations (departure time, route, mode, and others). In this paper, a systematic review of the current state of research in travel time reliability, and more explicitly in the value of travel time reliability is presented. Moreover, a meta-analysis is performed in order to determine the reasons behind the discrepancy among the reliability estimates.     

Prediction of travel time variability for cost-benefit analysis

Unreliable travel times cause substantial costs to travelers. Nevertheless, they are often not taken into account in cost-benefit analyses (CBA), or only in very rough ways. This paper aims at providing simple rules to predict variability, based on travel time data from Dutch highways. Two different concepts of travel time variability are used, which differ in their assumptions on information availability to drivers. The first measure is based on the assumption that, for a given road link and given time of day, the expected travel time is constant across all working days (rough information: RI). In the second case, expected travel times are assumed to reflect day-specific factors such as weather conditions or weekdays (fine information: FI). For both definitions of variability, we find that the mean travel time is a good predictor. On average, longer delays are associated with higher variability. However, the derivative of variability with respect to delays is decreasing in delays. It can be shown that this result relates to differences in the relative shares of observed traffic ‘regimes’ (free-flow, congested, hyper-congested) in the mean delay. For most CBAs, no information on the relative shares of the traffic regimes is available. A non-linear model based on mean travel times can then be used as an approximation.     

The accuracy of proxy responses in a stated choice setting: A re-examination and some controversial conclusions

Data is typically gathered from an individual respondent who represents the group or the household. This individual is often identified as the “primary decision maker” and is asked to provide responses as a proxy for the group given that the cost of interviewing each member individually is impractical and/or expensive. The collection of joint preferences is rarely undertaken, with the use of proxy responses not uncommon in travel behaviour research. Under such a framework, there exists an assumption that the primary decision maker has perfect knowledge of other group member preferences, and bargaining behaviour, and is able to synthesise this information when providing a response on their behalf. The validity of such an assumption however remains an open question, with recent research calling the reliability of proxy responses into account (Bateman and Munro, 2009). In this paper, using three models estimated in willingness to pay space, we examine the accuracy of proxy responses in a stated choice experiment. We find that there is overlap between a proxy response and the own preferences of the individual providing the proxy choice, but while the proxy responses fail to represent the full preference heterogeneity that exists in the actual choices made by individuals, the proxy responses in aggregate provide a suitable replacement for actual data, subject to a number of caveats.     

Aggregating mobile object trajectories: cumulative time geographic density estimation for GPS data

We present new approaches that expand upon the time geographic density estimation (TGDE) framework previously employed to estimate potential path trees. In the past, TGDE metrics have identified possible locations an individual moving object may have passed between, given known origin and destination points. This paper utilizes a new form of TGDE to investigate taxicab GPS traces over a specified time horizon with position ‘gaps’. To this end, we propose a new extension to the TGDE framework, TGDE-C, which is used to determine the cumulative TGDE values for a group of GPS traces, at a given location. These metrics are applied to multiple taxis and allow for time of day analysis. Additionally, we combine these new extensions with existing TGDE metrics that allow us to determine how accessible individual or groups of vehicles are to urban opportunities.     

三维地面模型测量技术在水运工程中的应用

码头、航道等水运工程的三维设计、BIM设计需要更精细的、直观的、全覆盖的三维地面模型。利用多波束测深技术、无人机航测技术和三维激光扫描技术采集高精度的测量点云数据,基于AutoCAD、Civil 3D等软件平台,建立高精度、直观的三维地面模型的技术方案,结合工程实例进行论证分析。结果表明,从陆域到水域再到局部重点建构筑物三维测量内外业技术解决方案合理、效果显著,能较好地满足三维设计、BIM设计等要求,具有较高的应用和参考价值。     

SIR-20地质雷达在工程中的应用及图谱解释

介绍了地质雷达探测的基本原理,并结合工程实例和模拟试验说明了地质雷达的具体应用。通过对地质雷达检测图谱的分析和归类处理,找出目标体的地质雷达图谱特征,为地质雷达在工程中的应用提供了判别依据。     

沥青路面再生中基于系统聚类法的路面调查

同一道路使用数年后,由于各种原因,各路段的路面状况有着较大的差异,即路段之间的不均匀性。本文应用统计学上的系统聚类法的概念及方法,来处理各个路段沥青旧路面材料几个主控指标,将各段沥青路面进行归类,可以使施工操作简便,用时又保证了沥青旧料的均匀性。