智能分布式驱动汽车路径跟踪/制动能量回收协同控制策略研究

为了解决智能分布式驱动汽车路径跟踪与制动能量回收系统间的协同控制难题,充分考虑分布式驱动汽车四轮扭矩独立可控在智能驾驶系统中的优势,设计适应不同路面附着条件的智能分布式驱动汽车转向、制动分层协同控制策略。上层控制器依据不同的路面类型设计差异化的多目标代价函数,以综合优化各工况下的控制目标。高附路面下,制定满足最大能量回收值的全局参考车速,在线优化路径跟踪指令,实现最优能量回收的同时减小系统运算负荷;低附路面下,优先考虑车辆的路径跟踪性能和行驶稳定性,在多目标代价函数中取消对全局参考车速的跟随要求,增设终端速度约束与能量回收项性能指标并减小能量回收项性能指标的权重系数。上层控制器基于模型预测控制方法对多目标代价函数进行滚动优化与预测求解,得到期望的前轮转角及4个车轮的总制动扭矩需求。下层控制器根据制动扭矩需求对四轮的液压制动扭矩和电机制动扭矩进行分配,最终完成整个复合制动过程。基于MATLAB/Simulink和CarSim软件,搭建控制器在环仿真平台,并在高附和低附路面条件下对所提出的策略进行试验验证。研究结果表明：高附路面下,所提出的控制策略在准确跟踪期望路径的同时相较固定比例制动力分配方法可提升2.7%的能量回收值并减少约0.02 s的单次计算时间;低附路面下,与使用高附控制策略相比,能够保证车辆的路径跟踪准确性与行驶稳定性,同时可提升7.8%的能量回收值;控制器在环试验结果证明了该协同控制策略对车辆性能提升的有效性。     

Camera calibration and vehicle tracking: Highway traffic video analytics

We describe a real-time highway surveillance system (RHSS), which operates autonomously to collect statistics (speed and volume) and generates incident alerts (e.g., stopped vehicles). The system is designed to optimize long-term real-time performance accuracy. It also provides convenient integration to an existing surveillance infrastructure with different levels of service. Innovations include a novel 3-D Hungarian algorithm which is utilized for object tracking and a practical, hands-off mechanism for camera calibration. Speed is estimated based on trajectories after mapping/alignment with respect to dominant paths learned based on an evolutionary dynamics model. The system, RHSS, is intensively evaluated under different scenarios such as rain, low-contrast and high-contrast lightings. Performance is presented in comparison to a current commercial product. The contribution is innovation of new technologies that enable hands-off calibration (i.e., automatic detection of vanishing points) and improved accuracy (i.e., illumination balancing, tracking via a new 3-D Hungarian algorithm, and re-initialization of background detection on-the-fly). Results indicate the capability and applicability of the proposed system in real-time and real-world settings.     

About the possibilities of using the renewable energy power sources on railway transport

Several electrification systems based on renewable energy power sources (first of all, solar energy) are discussed in respect to their applicability to railway transport and, in particular, to suburban electric trains. Two systems are considered with basic technical details and economic estimation, both including the onboard bank of batteries and the photovoltaic converters (PVC) of solar energy for compensation of energy expenses, which could be positioned either on stations or on wagon's roofs. Sun‐tracking systems and their effect on the solar energy conversion efficiency are discussed in application to stationary and moving PVC platforms. An analysis made shows that introduction of the “green” systems discussed will not only have positive ecological impact, but also can bring a notable economical effect even with today's components, while it could be considerably greater with the usage of new PVCs, which are being developed by the authors. Copyright © 2011 John Wiley & Sons, Ltd.     

Use of a probabilistic particle tracking model to simulate the Prestige oil spill

A probabilistic particle tracking model is used to simulate the oil dispersion after the Prestige wreckage. This oil spill constitutes a suitable benchmark to analyze the capabilities of a probabilistic model, since the time elapsed from wreckage to oil landing (12 days) is much longer than the reliability time associated with forecast winds, usually on the order of 3–4 days. The particle model can be run in two different modes: real time mode (when existing reliable wind fields for the event under scope) and in probabilistic mode (in absence of reliable wind fields but with historical fields corresponding to a similar period). The validity of the particle model is first evaluated in a hindcast way, running the Prestige case with the wind fields corresponding to the period November 19 to November 30, 2002, which were not available at the moment of the wreckage. Calculations show the accuracy of the model to provide the right impact point and timing. The probabilistic model is then used to simulate the same event by means of historical data. The region where the oil landed is shown to be the area with the highest probability to be impacted.     

某型号武器系统跟踪机构装配过程研究

总结了某型号武器系统红外跟踪探测跟踪机构的装配过程控制技术和测试。扼要地叙述了跟踪机构的结构特点、性能指标、机械装配及装配过程中采取的一系列工艺措施。通过优化设计装配顺序和工装,为关键部件的装配和检测创造了条件,使产品的装配质量大大改观,保证了产品的一次装配成功。     

һ�����͵��˶�Ŀ��ʶ��������㷨�о�

提出了一种应用于智能交通监控系统的运动目标识别和跟踪方法。针对帧间差分提取运动目标的缺陷与不足,提出了一种基于冗余小波变换的运动目标识别算法,即直接在冗余小波变换域提取运动区域,从而检测出运动目标。对于检测出来的运动目标,本文对mean-shift算法进行了改进,采用自适应mean-shift算法,对目标进行跟踪。实验结果表明,本文提出的算法可以有效地提取运动目标,即使目标与背景具有较高的相似度,也可以较准确的提取出前景运动信息,效果要好于传统的帧差法;跟踪目标准确度高,不受目标大小变化的影响。本算法具较高的实用价值和应用前景。     

基于模糊神经网络的智能车辆循迹控制

为提高智能车辆自主循迹控制的精度,提出了一种基于模糊神经网络控制( FNNC)和神经网络预测( NNP)的智能循迹控制策略。转向控制器的输入量有3个：预瞄点处的横向循迹误差、汽车横摆角速度和侧向加速度。车速控制器的输入量有4个：预瞄点处的面积误差、侧向加速度、汽车侧偏角和转向盘转角。网络训练采用误差反向传播法。仿真与试验结果表明,所设计的循迹控制器通过对驾驶员操作样本的训练,能实现对车辆的车速与转向控制,横向循迹误差和目标车速均比较理想。     

基于序列影像种子跟踪的道路线自动提取算法

为快速建立道路精确的几何模型,利用车载移动测量系统获取的序列影像开展了道路边线自动提取方法研究.针对不同类型道路边线的特征,提出了一种基于序列影像种子跟踪的道路线自动算法.首先,对不同质量道路影像分别采用基于灰度信息和梯度信息的道路边线边缘检测方法;其次,采用线性回归模型拟合道路边线,以当前帧拟合直线为种子点,提出了基于种子直线的序列影像感兴趣预测方法,在此基础上对下一帧影像道路边线进行跟踪;最后,以高速公路和城市街区道路序列影像为例,开展了道路边线自动跟踪提取试验,结果表明此方法可以达到优于20 cm的精度,具有很好的鲁棒性.     

基于"当前"统计模型的机动目标运动要素解算

在避碰过程中,舰船一般处于机动状态.因而,对机动目标运动要素解算的精度直接影响到避碰的效果.通过对多种模型的比较,选用了"当前"统计模型,"当前"统计模型相对于其他模型能够更为真实地反映目标的机动变化.仿真结果表明,此算法收敛迅速并有较高精度,其解算所得的目标运动要素能够满足舰船避碰等实用要求.