A new model for temporal–spatial stochastic analysis of vehicle–track coupled systems

The vehicle–track coupled system has a random nature in the time–space domain. This paper proposes a computational model to analyse the temporal–spatial stochastic vibrations of vehicle–track systems, where the vehicle–track system is divided into a vehicle subsystem, track subsystem, and interfacial subsystem between the wheel and rail. In this model, the time-varying randomicity of dynamical parameters of the vehicle system, correlation, and randomness of the track structural parameters in the time–space joint dimensions, and randomness of the track random irregularities are considered. A probability dimension-reduction method was used to randomly combine different random variables. Furthermore, the probability density evolution method was applied to solve the delivery problem of probabilities between excitation inputs and response outputs. The temporal–spatial stochastic vibrations of the vehicle–track system with different coefficients of variation were studied, in which we assumed that the dynamic parameters obeyed the normal distribution, and the stochastic simulation method of the track random irregularities is probed into. The calculated results from this model are consistent with the actual measured results and physical conceptions. Thus, the temporal–spatial stochastic evolutionary mechanism can be explored, and the limits of dynamic indices can be formulated by using this developed model.     

基于响应面和遗传算法的柴油机瞬态过程喷油参数优化

基于台架试验数据,利用响应面法建立了某工程机械用柴油机瞬态过程喷油参数与性能的近似高精度模型,基于此模型采用遗传算法对瞬态过程喷油参数分别进行离线优化研究。结果表明:采用单目标优化确定的燃油消耗率(BSFC)、NO_x比排放量和颗粒质量(PM)比排放量的优化极限分别可达180.23g/(kW·h),8.92g/(kW·h)和0.011 8g/(kW·h),相对原机可降低多达4.5%,34.0%和37.3%。双目标优化的Pareto解集表明,相比于同时优化BSFC和NO_x比排放量,BSFC和PM比排放量更容易同时得到优化。采用权重因子适应度函数的三目标优化结果对应的BSFC,NO_x比排放量及PM比排放量分别为184.70g/(kW·h),12.62g/(kW·h)和0.012 2g/(kW·h),较原机分别降低2.1%,6.6%和35.3%。改进优化模型后,性能优化Pareto解集对应的BSFC和PM比排放量水平都非常接近其优化极限,但NO_x比排放量相对其优化极限仍然较高。     

基于小波和粒子群算法的HEV行驶状况辨识方法研究

针对混合动力汽车(HEV)行驶状况(道路坡度和整车载荷)变化难以有效识别,导致驱动系统控制策略不能有效满足驾驶员意图问题,以混联式HEV为研究对象,提出了基于小波滤波和粒子群算法的HEV行驶状况辨识方法。首先建立了汽车行驶状况辨识模型,采用最小二乘法确立了优化目标函数,其次研究了基于小波滤波和粒子群算法的HEV行驶状况辨识原理,最后进行了行驶状况粒子群智能算法辨识试验。在采集实车数据的基础上,对实车数据进行小波滤波,并运用行驶状况辨识方法对道路坡度和整车载荷进行了辨识,并对辨识结果进行小波滤波,结果表明,试验工况下整车载荷辨识的相对误差绝对平均值为2.71%,道路坡度辨识的相对误差绝对平均值为3.85%,验证了所提出方法的有效性。     

城市灯控平面交叉口的自行车交通设计研究

城市灯控平面交叉口混合交通流安全和效率的核心研究对象应该是自行车与机动车交通流间的相互影响。本丈在大量的理论分析和实践的基础上,探讨时空分离法的自行车交通设计的基本原则和交通空间设计方法,即自行车右转弯专用车道设计、左转自行车二次过街以及自行车与行人过街一体化设计,并进行了南京市太平北路与珠江路交叉口的应用实例分析。本文的城市灯控平面交叉口自行车的交通设计方法可为解决城市灯控平面交叉口混合交通问题提供借鉴。     

立交线形动态拖动设计的关键技术

对立交线形动态拖动设计的几个关键技术进行论述.分析了缓和曲线计算精度,提出了动态拖动模式设计模型,以及约束满足条件下的非线性方程组的数值解算法.     

强夯置换法处理滨海公路软土路基

结合辽宁省滨海公路庄河市大张至中隈段的土质情况,阐述了强夯处理软土地基的设计方法、施工过程及处理后的地基效果.     

Flow Stress Model of Stainless Steel OCr13Ni5Mo at Elevated Temperature

For a more accurate forming calculation and numerical simulation of hydraulic turbine blade,experimental studies on the flow stress of stainless steel OCr13Ni5Mo were carried out upon Gleeble-1500 thermal simulator under different deformation conditions.The results then were analyzed and the effects of all influencing factors were summarized consequently.New mathematic models were conceived.Utilizing the software Matlab,regression coefficients were calculated by the least square method.The model has an eminent capability of curve-fitting performance with impact structure whose correlation coefficient is up to 0.908 0 and the cosine coefficient is 0.995 8.All mathematic models and process parameters can be used in engineering calculations or computer simulations.     

Sensitivity analysis of parameters for multi-stand roll forming using a new booting model

Multi-stand roll forming is a process that has very complicated deformation behaviour and shows significant nonlinearity.In this paper, the sensitivity analysis of parameters for multi-stand roll forming was performed via a new booting finite element method(FEM) model.Compared with the most of simulation, the new model is more consistent with production process and can account for the effects of roll rotating speed.Based on the model, the process of an open section channel formed with 10 passes was simulated and the sensitivity analysis was conducted with orthogonal experiment design combined FEM model.The multi-stand roll forming process can be efficiently analyzed by the new booting model.And sensitivity analysis shows the hardening exponent plays an important role in controlling the quality of the products.     

浅谈软土泥沼地基的处理方法

介绍了软土及泥沼地基处理方法,有换土垫层法、强夯法、侧向约束法、土工织物加固法、排水固结法、综合处理方法的机理和适用范围。     

短时交通流预测方法比较

短时交通流预测是实现交通流诱导的关键技术之一。短时交通流因为其不确定性等特点而使其预测很复杂。通过实地调查获取的交通流量数据,分别采用移动平均法、指数平滑法、AR模型法3种交通流预测方法进行短时交通流量预测,并通过不同的评价指标对上述3种方法的预测效果进行评价,得出AR模型方法的预测效果优于其他2种方法。