城市公交线网优化的线性模型

为了对现有公交线网进行优化,有效利用现有交通资源,解决城市交通问题,运用系统科学的思想,通过对城市公交线网优化的主要内容、优化原则、优化目标以及约束条件的分析,兼顾考虑乘客出行时间、公交线网密度和公交企业的利益以及公交线网的布局对整个城市的交通系统的影响,提出了优化目标的函数表达式及相应约束条件的数学表达式,建立了公交线网优化的线性模型,并给出了运用逐步筛选法对所提出的数学模型进行求解的方法。     

信号控制下交叉口延误计算方法研究

为了对交通信号控制参数进行优化,需要对交叉口延误进行定量的分析与计算。根据信号控制交叉口理论,在以往定时信号延误研究的基础上,基于交叉口一个进口方向的车辆延误分析,针对交叉口各进口方向同时处于非饱和与同时处于过饱和交通状况,分析并推导了交叉口延误公式.并用具体的算例说明了公式的用法。公式表明了交叉口延误与信号控制参数、车辆到达率等参数之间的动态关系,为进一步研究交通信号自适应控制方法和建立交通信号控制参数优化的性能指标函数提供了信息。     

公路交通可持续发展评价指标及评价方法研究

根据公路交通可持续发展评价的内容和特点,从公路交通可持续发展水平、发展能力、发展协调性3个方面建立了评价指标体系;提出了指标属性值和无量纲化的计算方法;应用模糊识别原理,结合AHP权重确定方法,依据公路交通可持续发展目标(级别划分)的实现程度,提出公路交通可持续发展的多级模糊识别综合评价模型;其评价方法和模型,反映了公路交通可持续发展的内涵,对区域公路交通可持续发展评价有借鉴作用。最后,进行了实证研究。     

重载水泥混凝土路面损坏机理及对策研究

随着交通量的增加、轴载的增大和车速的提高,按照传统水泥混凝土路面规范修筑的道路出现了严重的早期破坏。本文通过分析重载交通作用下现有混凝土路面出现的早期破坏特征及其机理,从材料与结构上提出防止水泥混凝土路面在重载作用下发生早期破坏的对策。     

非港湾式公交停车对道路交通流的影响分析

公交车进出站点不仅影响本身,也给其他车辆运行带来很大干扰。文章首先比较全面地分析非港湾式公交停车影响下道路交通流特征,然后借助于EXCEL软件,构建关于公交停车频率、公交停车时间、最大公交停车长度及其存在时间、道路流量的车速和车头时距多元线性模型,并进行了严格的数学检验。该研究为合理分析路段交通流状况、正确计算区间行驶车速与车头时距提供了依据。     

Experimental evaluation of Heavy Duty Vehicle speed patterns in urban and port areas and estimation of their fuel consumption and exhaust emissions

Exhaust emissions and fuel consumption of Heavy Duty Vehicles (HDVs) in urban and port areas were evaluated through a dedicated investigation. The HDV fleet composition and traffic driving from highways to the maritime port of Genoa and crossing the city were analysed. Typical urban trips linking highway exits to port gates and HDV mission profiles within the port area were defined. A validation was performed through on-board instrumentation to record HDV instantaneous speeds in urban and port zones. A statistical procedure enabled the building-up of representative speed patterns. High contrasts and specific driving conditions were observed in the port area. Representative speed profiles were then used to simulate fuel consumption and emissions for HDVs, using the Passenger car and Heavy duty Emission Model (PHEM). Complementary estimations were derived from Copert and HBEFA methodologies, allowing the comparison of different calculation approaches and scales. Finally, PHEM was implemented to assess the performances of EGR or SCR systems for NO_X reduction in urban driving and at very low speeds.The method and results of the investigation are presented. Fuel consumption and pollutant emission estimation through different methodologies are discussed, as well as the necessity of characterizing very local driving conditions for appropriate assessment.     

浅谈FAS双中心建设及设备维护

重点分析了西安局集团公司由2K数调主系统组网更新改造为FAS双中心网络的建设方法,并根据日常维护经验,列举了调度台通道故障处理、FASB简易故障判断及计表倒换试验、FASA和FASB系统与MSC之间的业务故障处理等.     

Hierarchal assessment of noise pollution in urban areas – A case study

Noise pollution in urban areas has many harmful effects on the citizens. There are varieties of noise generation sources of which the traffic noise could be a major source. The point which is perhaps less noticed is that sound level is not the only parameter to indicate the extent and intensity of noise pollution. Situation of urban land uses, distribution of population centers and types of passages can deeply affect the concern on this environmental issue but not with a similar ratio. This article presents an overlaying technique to define noise prone areas using all different factors involved. A case study was carried out in the District 14 of Tehran Metropolitan City where there are busy streets and highways. For this purpose, the share of each criterion in noise pollution intensity was determined using Analytical Hierarchy Process (AHP). Afterwards, the map layers were overlaid based upon the relative importance of the criteria to get the final map on which the noise prone areas are specified. The developed method could be used as a tool for indirect estimation of noise pollution by which instead of direct measurement of the equivalent sound level, it would be possible to predict noise susceptible areas considering the most important influential factors.