新型国产不锈钢材料在汽车排气系统中的应用

对汽车排气系统及其主要零件的腐蚀问题进行了分析,包括腐蚀坑深度与冷凝液pH值、Cl-、SO24-离子浓度的关系,并主要介绍了一种新型国产不锈钢409材料在汽车排气系统的应用。结果表明：该材料具有耐腐蚀性能良好、低成本的优点。     

硫含量对柴油车排放的影响与减排措施的研究

分析硫含量对柴油车排放物PM、NOx、CO的影响,并通过分析硫含量对氧化催化转化(DOC)、柴油颗粒过滤(DPF)、NOx排放控制等排气后处理技术的影响,提出相应的有效减排措施。     

考虑排放因素的公交优先信号控制优化方法研究

以4相位单交叉口为研究对象,保持信号周期不变的情况下,以减少人的总延误和交叉口区域尾气排放量为目标,通过改变各相位绿灯时间来建立优化模型。运用粒子群算法对模型求解。仿真算例表明,此方法在降低交叉口区域人总延误的同时,减少了该区域内机动车尾气排放量,在保障车辆正常通行的情况下改善了环境质量。     

基于交通仿真的低碳交通策略评价方法研究

研究了交通领域低碳策略的分类,构建了不同层次交通仿真模型与低碳交通策略评价的对应关系,提出了交通仿真技术在低碳交通策略方案评价中的应用步骤。结合交通仿真模型输出数据特点、低碳策略评价的侧重点,选取碳排放量和机动车污染物排放量作为低碳策略评价的主要指标。在此基础上,以秦皇岛2020年规划路网为分析对象,开展了不同出行方式比例下低碳类指标的对比分析研究,以说明基于交通仿真的低碳交通策略评价方法的可行性和有效性。     

Fault diagnosis of marine diesel engine intake and exhaust system based on dynamic feature fusion北大核心CSCD

[目的]船舶系统由多设备的复杂机构组成,各组件参数具有动态性和非线性的特点,所以故障诊断过程复杂。为提高诊断效率,提出一种动态特征融合方法。[方法]利用分形理论、动态理论及核主元分析(KPCA)法对系统状态数据进行重构、映射及筛选,得到主元特征数据矩阵,求得平方预测误差(SPE)及相应的控制限,构建出基于船舶柴油机进排气系统健康数据的离线监测模型,利用该模型对系统进行故障诊断分析。为验证模型的有效性,选取某船舶柴油机进排气系统的故障数据进行验证分析。[结果]结果表明,动态特征融合分析方法可有效实现对系统动态非线性状态数据的精确分析,实现对系统故障的高效分析和诊断。与KPCA及支持向量机(SVM)方法相比,所提方法具有更好的故障诊断性能。[结论]该方法可实现船舶柴油机进排气系统故障的检测和诊断,提升系统运行的可靠性和安全性。     

香港典型山区道路汽车行驶工况污染物排放研究

通过安装车载测试系统收集香港港岛山区路段正常行驶工况下尾气中的CO、NOx、HC等污染物和油耗并辅助计算机软件进行分析。研究得出,山区道路设计、地形地貌和驾驶习惯对车辆油耗以及CO、NOx和HC排放有直接关系。可以通过坡道加宽、坡道延长、减少坡道红绿灯等措施减少车辆在山区道路行驶过程中速度变化频率,从而减少油耗以及CO、NOx和HC排放。     

A valuation of the environmental performance of vehicles: an analysis and comparison of two methodologies

The European Clean Vehicle Directive was introduced in 2009 to create an obligation on public authorities to take into account the impact of energy consumption, carbon dioxide (CO₂) emissions and pollutant emissions into their purchasing decisions for road transport vehicles. This should stimulate the market for clean and energy-efficient vehicles and improve transport's impact on environment, climate change and energy use. Therefore the so-called ‘Operational Lifetime Cost’ of a vehicle is calculated, divided into the cost for energy consumption, CO₂ and pollutant (nitrous oxide, particulate matter, non-methane hydrocarbons) emissions. In Belgium, a different methodology has been developed to calculate the environmental impact of a vehicle, called ‘Ecoscore’, based on a well-to-wheel approach. More pollutants are included compared to the Clean Vehicle methodology, but also indirect emissions are taken into account. In this paper, both methodologies are compared and used to analyze the environmental performance of passenger cars with different fuel types and from different vehicle segments. Similar rankings between both methodologies are obtained; however, the large impact of energy use (and CO₂ emissions) in the Clean Vehicle methodology disadvantages compressed natural gas cars, as well as diesel cars equipped with particulate filters, compared to the Ecoscore methodology.     

小管径垂直管水下排气完全携带点实验及分析

船用柴油机采用水下排气方式具有降低排气噪声、改善舱外空气质量等优点，在大型豪华游轮等特殊船舶中具有广泛应用前景。为防止海水由排气管倒灌入柴油机造成事故，需弄清水下排气管内水倒流发生的条件。对大管径垂直管防止水倒灌临界条件即完全携带点的已有认识较为统一，而对小管径垂直管仍未有清晰的认识。在管径25~100 mm范围对垂直管的完全携带点进行了实验，探究了小管径垂直管的完全携带点预报方法。实验结果表明在小管径范围，垂直管完全携带点对应的临界表观气速随管径增大而升高，但气相Wallis数随管径增大而减小，说明Wallis数过度关联了管径对临界表观气速的影响。基于气相Kutateladze数和无量纲气相黏性，对小管径垂直管提出了新的完全携带点预报模型和相应实验关联式。     

Impact of transition between signal timing plans in social cost based in delay,fuel consumption and air emissions

Significant effects of traffic congestion include the cost associated with extra travel time, fuel consumption, and gas emissions. This paper develops a mathematical function to quantify the monetary impact of transition designs between signal timing plans on users and the environment. This function offers an approach to reduce problems such as excessive travel time, pollution emissions and fuel consumption. The proposed social cost function is evaluated for various transition plans to assess the impact of the number of steps required to adjust signal timing. The relationships between delay, fuel consumption and gas emissions and the number of steps needed to achieve the transition are also analysed.     

Port-city exhaust emission model: An application to cruise and ferry operations in Las Palmas Port

Exhaust emissions cause air pollution and climate change. The exhausts of shipboard fuel combustion are equally damaging particularly, so close to the environmentally sensitive mainland and island coasts, as well as at ports due to their urbanized character. This paper estimates, for the first time, exhaust pollutants related to cruise and ferry operations in Las Palmas Port and, in an island context. Emission assessment is based on a full bottom-up model and messages transmitted by the Automatic Identification System during 2011. Results are described as a breakdown of NOx, SOx, PM_2.5, CO and CO₂, according to ship classes, operative type and time, providing valuable information to environmental policy makers in port-city areas and islands under similar conditions. It is generally concluded that vessel traffic and passenger shipping in particular are a source of air pollution in Las Palmas Port. Emission maps confirm location of hot spots in quays assigned for cruise and ferry operations. Policy recommendations encourage regular monitoring of exhaust emissions and market-based incentives supported by details on polluting and operative profiles. On the other hand, feasibility studies are suggested for automated mooring, LNG bunkering facilities and also shore-side energy services, prioritizing berthing of shipping sectors (or sub-sectors) with the highest share of exhaust emissions once their local effects have been confirmed by a dispersion, exposure and impact assessment.