街道设计理念下工程实践的若干思考

“完整街道”、“街道设计”等城市道路改造设计理念开始广泛应用于城市道路旧改等实际工程项目。然而，街道设计理念与传统的设计习惯、道路管理模式及使用者的接受程度，依然在现实应用以及工程实施上存在较大的分歧。以深圳市罗湖区道路设施品质提升工程和深圳市罗湖区精品示范路工程两个项目为工程背景，分别从宏观的街道空间改造和部分微观细节设计两个角度，分析项目实施过程中存在的难点和优化处置方案，为后续工程实践以及相关街道设计导则优化提供借鉴。     

大规模施工对城市路网交通影响评估技术研究

传统的施工期交通组织研究一般只针对单个建设项目，而城市在举办特别重大活动之前往往有一轮建设高潮，形成大范围集中性施工，对城市路网运行的影响很大，需从全局角度系统性评估其交通影响。针对大批量建设项目同时施工对路网整体的交通影响，提出了路网敏感路段划分、路网通行能力损失测算、基于交通模型推演的交通拥堵指数预测等评估技术，并在杭州“迎亚运”重大基础设施建设中予以运用，应用效果较好。     

低交通量下“与车随行”隧道照明节能控制技术应用研究

针对公路隧道照明安全与节能之间的矛盾，特别是低交通量下“无车照明”的能耗浪费现象，采用微波车检实时探测交通流技术，提出一种在低交通量下实施“车来灯亮、车走灯暗”的“与车随行”智能控制技术。根据安全视距和人眼视觉反应驰豫时间要求，确定该控制技术下“车来灯亮”以及无来车时“车走灯暗”亮度水平和间隔时间规定。由该技术制定的应用方案用于实际工程，不仅可保证隧道照明安全性，更可在现有规范基础上进一步降低隧道照明能耗，实现低交通量下实时动态的智慧节能照明控制。根据实际工程照明效果测试，所采用的方案可降低隧道照明年运营费用达72%。该技术对提升隧道照明安全和节能水平，推动隧道提质升级和公路交通绿色低碳水平具有积极的促进作用。     

A study of the environmental impacts of intelligent automated vehicle control at intersections via V2V and V2I communications

This article presents a novel intersection traffic management system for automated vehicles and quantifies its impact on fuel consumption and greenhouse gas emissions of CO₂ relative to traditional traffic signal and roundabout intersection control. The developed intelligent traffic management (ITM) techniques, which are based on a spatiotemporal reservation scheme, ensure that vehicles proceed through the intersection without colliding with other vehicles while at the same time reducing the intersection delay and environmental impacts. Specifically, the spatiotemporal reservation scheme provides each vehicle a collision-free path that is decomposed into a speed profile along with navigational instructions. The integration of the developed microscopic traffic simulator with instantaneous emission model, provides improved assessments of the environmental impact of traffic control strategies at intersections. The simulator architecture integrates several ITM algorithms, vehicle sensors, V2V/V2I communications, and emission and fuel consumption models. Each vehicle is modeled by an agent and each agent provides information depending on the specific vehicle sensors. The ITM system is supported by V2V and V2I communications, allowing the exchange of information among vehicles and infrastructure. The data include the estimated vehicle position and speed. Compared with traditional traffic management techniques, the simulation results prove that the proposed ITM system reduces CO₂ emissions significantly. The research also shows that these reductions are more significant when the traffic flow increases.     

电气化公路技术研究

交通是能源消纳的重要领域，其对社会能源结构的调整和节能减排具有重要的影响和带动作用。在陆路交通方面，轨道交通和小型客运车辆的电气化发展方向相对清晰，而公路货运尚无明确的技术路线。为充分利用清洁能源，减少化石能源在交通领域中的使用，发展并推广电气化公路技术，对重载卡车的蓄电池、燃料电池、混合动力3种电气化方案进行对比分析，结合卡车负载的特点，对不同电气化方案进行评估。研究融合新能源发电及并网、混合动力技术、智能驾驶技术的电气化公路技术，从车辆动力技术、供电线路、受电弓与计费、新能源并网、编组智能驾驶运行5个方面对电气化公路方案进行介绍，可以实现公路货运系统的绿色、安全、高效运行。以10公里线路电气化为例，进行规划和成本估算，构建单车和区域（或路段）电气化的运营成本计算模型，基于燃油消耗和阻力分析2种方法进行计算。对车辆购置及改装、基础设施建设、可再生能源发电、系统环保效益等4个方面进行技术分析与成本测算。从供能技术变革、商业模式和推广路线3个角度对电气化公路技术的未来推广进行论证展望。研究结果表明：电气化公路技术的应用与规模化能够带来巨大的经济与环境收益，其中的混合动力方案与架空线输电方案为面对未来可能的储能技术变革与无线输电普及打下重要的基础，提供了拓展空间，也是重载货车实现智能驾驶的重要步骤；与燃油驱动相比，电驱动百公里成本减少96元，单一重卡年运营成本减少18.8万元，百公里污染物（如：碳氧化物、氮氧化物等）均减少50%以上。     

论公路隧道提质升级

与欧洲和日本等发达国家相比，我国公路隧道工程品质亟待提升。从国家战略、行业需求和人民需要3个维度分析开展公路隧道提质升级行动的时代背景，从8个方面解读其深刻内涵，并详尽阐述公路隧道提质升级的总体思路和技术要点。强调应关注的重点区域是隧道洞口、洞身和路面，最需要补齐的短板是通风、照明、消防、逃生疏散、交通安全设施以及智能化管养平台，并提出“设施是基础、安全是根本、养护是关键、管控是核心、预案是保障、品质是追求”，建议大力推进公路隧道建设、管理、养护、运营、安全、服务协调发展，打造安全、绿色、智能的公路隧道，助力我国由“公路隧道大国”迈向“公路隧道强国”。     

城市交通能耗区的识别及等级划分方法研究

随着社会经济的发展，机动车保有量急剧增长，城市化过程中交通拥堵问题日趋严重，交通能源消耗加剧。为了降低由此带来的损失，需要及时探明路网中交通效率低、能耗高的区域，并采取有效的交通管理措施。通过研究交通状态与能耗的关系，进行相应的交通参数分析，建立能耗区识别及等级划分模型，计算得到3个等级能耗区的界定阈值分别为0．411和0．678。     

Real-time traffic state estimation in urban corridors from heterogeneous data

In recent years, rapid advances in information technology have led to various data collection systems which are enriching the sources of empirical data for use in transport systems. Currently, traffic data are collected through various sensors including loop detectors, probe vehicles, cell-phones, Bluetooth, video cameras, remote sensing and public transport smart cards. It has been argued that combining the complementary information from multiple sources will generally result in better accuracy, increased robustness and reduced ambiguity. Despite the fact that there have been substantial advances in data assimilation techniques to reconstruct and predict the traffic state from multiple data sources, such methods are generally data-driven and do not fully utilize the power of traffic models. Furthermore, the existing methods are still limited to freeway networks and are not yet applicable in the urban context due to the enhanced complexity of the flow behavior. The main traffic phenomena on urban links are generally caused by the boundary conditions at intersections, un-signalized or signalized, at which the switching of the traffic lights and the turning maneuvers of the road users lead to shock-wave phenomena that propagate upstream of the intersections. This paper develops a new model-based methodology to build up a real-time traffic prediction model for arterial corridors using data from multiple sources, particularly from loop detectors and partial observations from Bluetooth and GPS devices.