怠速充电工况下的电池SOC平衡控制

在分析单电机和双电机混合动力电动车发动机怠速充电工况下电池能量稳定性控制要求的基础上,提出了一种怠速充电工况电池SOC平衡的主动控制策略,并给出相应控制过程的能量控制目标值计算公式和相应的分析.通过对所提出的怠速充电工况电池SOC平衡控制策略进行仿真和实车测试,结果表明,该控制策略能有效控制电池SOC平衡,怠速充电过程...     

结构-电磁激励下某电驱总成噪声控制

针对某电动汽车电驱总成的噪声问题,依据电驱总成车内噪声产生机理,进行整车状态声振特性测试,运用不同工况组合下的频谱特征和阶次特征等分析方法,识别出该电驱总成噪声问题为结构共振和电磁激励所致。针对结构共振问题,考虑电驱总成结构耦合特性、电机材料复杂多样性和线圈绕组质量,建立电驱总成有限元分析模型,求解出电驱总成的模态和振动响应,并通过敲击法模态试验得到模态参数进而对有限元模型进行验证,在此基础上以模态应变能为依据对电驱总成结构的局部刚度进行优化,提升结构共振频率,降低共振风险。针对电磁激励问题,以电驱总成中的永磁同步电机为研究对象,建立电磁仿真分析模型,以影响磁通密度的转子槽口的槽形、槽宽、槽深和槽间角度4个因素建立正交试验设计表,通过极差值得到各因素对齿槽转矩和输出转矩的影响水平,最后以降低齿槽转矩、加工工艺简单和对输出转矩影响小为目标,运用16组具有代表性的电磁方案,完成256个参数组合的寻优,并对优化方案进行了数值仿真计算。研究结果表明：优化方案的改善效果较显著;研究可为电动汽车车内噪声改善提供试验技术支持,并为电驱总成的结构共振噪声和电磁噪声控制提供方法参考。     

起伏基岩地层盾构姿态控制及刀具配置分析

为了解决在起伏基岩地层中盾构掘进姿态控制困难及刀盘不均匀消耗问题,以长沙地铁2号线西延线盾构区间为工程实例,通过对现场油缸推力关系统计分析,得出盾构区间直线段和曲线段地层由软至硬和由硬至软的合理的油缸推力比,并应用于工程实际,得出相应的直线段和曲线段的水平、竖向偏差且均满足轴线偏差不超过50 mm的标准要求。同时,通过对现场每百米刀具更换情况统计分析,得出合理的刀具改良配置建议。     

Modelling,simulation and applications of longitudinal train dynamics

ABSTRACT

Significant developments in longitudinal train simulation and an overview of the approaches to train models and modelling vehicle force inputs are firstly presented. The most important modelling task, that of the wagon connection, consisting of energy absorption devices such as draft gears and buffers, draw gear stiffness, coupler slack and structural stiffness is then presented. Detailed attention is given to the modelling approaches for friction wedge damped and polymer draft gears. A significant issue in longitudinal train dynamics is the modelling and calculation of the input forces – the co-dimensional problem. The need to push traction performances higher has led to research and improvement in the accuracy of traction modelling which is discussed. A co-simulation method that combines longitudinal train simulation, locomotive traction control and locomotive vehicle dynamics is presented. The modelling of other forces, braking propulsion resistance, curve drag and grade forces are also discussed. As extensions to conventional longitudinal train dynamics, lateral forces and coupler impacts are examined in regards to interaction with wagon lateral and vertical dynamics. Various applications of longitudinal train dynamics are then presented. As an alternative to the tradition single wagon mass approach to longitudinal train dynamics, an example incorporating fully detailed wagon dynamics is presented for a crash analysis problem. Further applications of starting traction, air braking, distributed power, energy analysis and tippler operation are also presented.     

船舶能效数据清洗方法研究

船舶能效数据清洗对于建立准确的船舶能效模型,提高船舶能效计算和分析的准确度,指导船舶节能航行具有重要意义.对船舶能效数据的故障特征进行了分析,运用阈值理论、船舶航行关联理论对故障数据进行了识别,运用插值法和灰色关联理论方法对水深、对水航速以及主机油耗数据中的异常数据进行修正,并且根据数据错误特征和数据清洗方法制定了船舶能效数据清洗流程,以内河邮轮"凯娅号"船舶上安装的船舶能效数据采集系统采集到的能效数据为研究对象,对数据清洗结果进行了分析.结果表明,水深数据修正值与实测值平均误差为1.58%,油耗数据、对水航速数据修正值与实测值平均误差为2.8%,1.5%,误差较小,能够满足后续建模以及数据挖掘等工作.     

4缸柴油机停缸仿真及试验研究

采用停缸技术对小型4缸柴油机的燃油消耗率和排放进行了仿真和试验研究。利用GT-Power建立模型并模拟了停缸位置对燃油消耗率的影响,结合传热损失等因素确定了试验停缸位置。在断油式停缸和断油断气式停缸模式下进行试验和燃烧分析。试验结果表明:停缸后缸内等容度降低;断油式停缸后燃油消耗率和NOx增大但炭烟减少;断油断气式停缸后部分试验点燃油消耗率降低,但NOx和炭烟排放增加。     

高能级强夯地基的处理

大连临空产业园填海造地工程陆域形成的工字型区域采用清淤换填块石形成,回填块石厚度为22～24 m,工程中对该区域分别采用夯击能10 000 kN·m和18 000 kN·m进行地基处理试验,试验监测和检测内容主要有深层水平位移、地下水位、孔隙水压力、地表沉降、测斜、分层沉降、多道瞬态面波、反应模量、载荷板、固体体积率和动力触探等,根据试验监测、检测成果与土力学相关公式计算结果进行对比分析,并论证两者差异之处,为工程后续清淤换填区的地基处理提供技术依据。     

“公交优先”战略下清远市公交发展研究

交通拥堵和交通污染问题是近年来引人关注的问题,特别是交通碳减排已成为发达国家碳减排的重点领域,而优先发展公交系统对解决上述问题具有重大的现实意义。在总结和阐述公交优先发展的内涵和意义的基础上,以清远市公交系统为研究对象,总结和分析了"公交优先"战略下清远市公交发展现状和问题,提出了清远市公交优先发展的思路与具体做法,并根据现有情况规划了三种不同水平的公交优先发展情景方案,计算了三种方案下二氧化碳的排放量。结果显示:公交很高吸引力的方案比一般吸引力的方案每年少排二氧化碳38.9万t,年度减排直接效益为2 723万元,节约能源的直接效益为12.5亿元。最后提出了清远市公交优先发展的政策建议。     

天然气发动机冷却系统校核

商要:发动机冷却系统的作用是使发动机的温度在所有工况下均保持在适当的范围内。冷却系统不仅要防止发动机过热,也要防止发动机过冷。本文主要是对某重卡车型的发动机冷却系统进行了校核计算,为整个车型的匹配计算提供数据支持。     

A tyre slip-based integrated chassis control of front/rear traction distribution and four-wheel independent brake from moderate driving to limit handling

This paper presents a tyre slip-based integrated chassis control of front/rear traction distribution and four-wheel braking for enhanced performance from moderate driving to limit handling. The proposed algorithm adopted hierarchical structure: supervisor – desired motion tracking controller – optimisation-based control allocation. In the supervisor, by considering transient cornering characteristics, desired vehicle motion is calculated. In the desired motion tracking controller, in order to track desired vehicle motion, virtual control input is determined in the manner of sliding mode control. In the control allocation, virtual control input is allocated to minimise cost function. The cost function consists of two major parts. First part is a slip-based tyre friction utilisation quantification, which does not need a tyre force estimation. Second part is an allocation guideline, which guides optimally allocated inputs to predefined solution. The proposed algorithm has been investigated via simulation from moderate driving to limit handling scenario. Compared to Base and direct yaw moment control system, the proposed algorithm can effectively reduce tyre dissipation energy in the moderate driving situation. Moreover, the proposed algorithm enhances limit handling performance compared to Base and direct yaw moment control system. In addition to comparison with Base and direct yaw moment control, comparison the proposed algorithm with the control algorithm based on the known tyre force information has been conducted. The results show that the performance of the proposed algorithm is similar with that of the control algorithm with the known tyre force information.