The identification and empirical characterization of vehicular (Lagrangian) fundamental diagrams in multilane traffic flow

Traditional macroscopic traffic flow modeling framework adopts the spatial–temporal coordinate system to analyze traffic flow dynamics. With such modeling and analysis paradigm, complications arise for traffic flow data collected from mobile sensors such as probe vehicles equipped with mobile phones, Bluetooth, and Global Positioning System devices. The vehicle‐based measurement technologies call for new modeling thoughts that address the unique features of moving measurements and explore their full potential. In this paper, we look into the concept of vehicular fundamental diagram (VFD) and discuss its engineering implications. VFD corresponds to a conventional fundamental diagram (FD) in the kinematic wave (KW) theory that adopts space–time coordinates. Similar to the regular FD in the KW theory, VFD encapsulates all traffic flow dynamics. In this paper, to demonstrate the full potential of VFD in interpreting multilane traffic flow dynamics, we generalize the classical Edie's formula and propose a direct approach of reconstructing VFD from traffic measurements in the vehicular coordinates. A smoothing algorithm is proposed to effectively reduce the nonphysical fluctuation of traffic states calculated from multilane vehicle trajectories. As an example, we apply the proposed methodology to explore the next‐generation simulation datasets and identify the existence and forms of shock waves in different coordinate systems. Our findings provide empirical justifications and further insight for the Lagrangian traffic flow theory and models when applied in practice. Copyright © 2015 John Wiley & Sons, Ltd.     

A comparative life-cycle energy and emissions analysis for intercity passenger transportation in the U.S. by aviation,intercity bus,and automobile

Intercity passenger trips constitute a significant source of energy consumption, greenhouse gas emissions, and criteria pollutant emissions. The most commonly used city-to-city modes in the United States include aircraft, intercity bus, and automobile. This study applies state-of-the-practice models to assess life-cycle fuel consumption and pollutant emissions for intercity trips via aircraft, intercity bus, and automobile. The analyses compare the fuel and emissions impacts of different travel mode scenarios for intercity trips ranging from 200 to 1600 km. Because these modes operate differently with respect to engine technology, fuel type, and vehicle capacity, the modeling techniques and modeling boundaries vary significantly across modes. For aviation systems, much of the energy and emissions are associated with auxiliary equipment activities, infrastructure power supply, and terminal activities, in addition to the vehicle operations between origin/destination. Furthermore, one should not ignore the embodied energy and initial emissions from the manufacturing of the vehicles, and the construction of airports, bus stations, highways and parking lots. Passenger loading factors and travel distances also significantly influence fuel and emissions results on a per-traveler basis. The results show intercity bus is generally the most fuel-efficient mode and produced the lowest per-passenger-trip emissions for the entire range of trip distances examined. Aviation is not a fuel-efficient mode for short trips (<500 km), primarily due to the large energy impacts associated with takeoff and landing, and to some extent from the emissions of ground support equipment associated with any trip distance. However, aviation is more energy efficient and produces less emissions per-passenger-trip than low-occupancy automobiles for trip distances longer than 700–800 km. This study will help inform policy makers and transportation system operators about how differently each intercity system perform across all activities, and provides a basis for future policies designed to encourage mode shifts by range of service. The estimation procedures used in this study can serve as a reference for future analyses of transportation scenarios.     

型腔结构对尾轴承力学性能影响的有限元分析

型腔尺寸的大小和腔数对水润滑橡胶尾轴承的力学性能有重要影响，并且直接影响轴承的承载能力和运转精度。本文基于有限元法，研究了不同型腔数目、型腔全角和型腔长度对尾轴承的力学性能影响。结果表明：在5种不同腔数尾轴承的研究对比中发现，4腔尾轴承的力学性能最优。研究型腔全角和长度因素影响时，发现全角55°长度500 mm的型腔结构性能更好。     

基于多元回归方法的海洋执法船主尺度分析

为分析海洋执法船主尺度之间的变化规律,对海洋执法船的发展趋势进行了介绍,并对其相关船型数据资料进行整理分析。采用多元回归的数学方法,建立了基于多变量的海洋执法船主尺度数学模型,有利于对海洋执法船主尺度的变化规律进行分析与掌握,为海洋执法船的报价设计与初步设计提供一定的科学依据。     

地铁供电系统中压开关柜电流分析理论和方法

通过分析地铁供电系统不同电压等级的设备电流特征,确定35 kV电压等级设备电流可构造标准曲线,采用机器智能学习算法分析、测算地铁供电系统中各类开关峰谷时段运行电流,以均值-方差方法确定电流的高度异常偏离点,实现异常点数据周期内统计以及实时提醒功能。应用电流实测值分析电流在工作日、节假日的不同曲线,为负荷预测和非正常运行方式下的负荷叠加风险提供预测和评估依据,保障供电系统的安全运行,提高负荷管控效率。     

Layout optimization of an inertial energy harvester for miniature underwater mooring platforms

Comprehensive analyses of the layout influence on power performance of a low-frequency miniature horizontal-pendulum-type inertial energy harvester for underwater mooring platforms are presented in this article. The mathematical models are obtained utilizing the Newton-Euler method. The power performance is evaluated by simulations over different parameters, such as damping, excitation frequency, and layout position. Simulation results indicate that the harvester can extract energy from low-frequency excitations over the range of 0.1 Hz–0.4 Hz, and maximum output power can reach to 0.7 W under excitation frequency f = 0.4 Hz. Different layout positions influence the energy harvesting performance of the harvester dramatically. Changing the layout position to positive value can enhance and broaden the power performance. The amplitude responses with different layout positions do not show resonant characteristics, even near the natural frequency of the harvester, due to large amplitude vibrations and strong nonlinear characteristic. As excitation frequency f = 0.4 Hz, there is a zero output power point appears at layout position d = −1.3 m. Moreover, the harnessed power has a quadratic relationship with the layout position value.     

基于时延特性建模的多断面短时交通流预测

针对现有交通流预测方法未充分考虑多断面车流演变规律，提出基于时延特性建模的时空相关性计算方法. 该方法采用对不同断面、不同时刻交通流的分布相似性度量，对输入的车辆到达数据序列进行切割构建时空相似度矩阵，得到相邻断面之间的时延参数. 基于时延特性建模，将多断面之间的流量信息进行融合，使用长短时记忆(LSTM)网络进行流量预测. 通过对实际路段数据的预测和结果分析，验证所提方法的有效性和实用性.     

横梁端部节点优化

通过有限元计算,对比几种常见的横梁端部连接方式,综合考虑结构整体强度、钢材使用量、舱室空间利用率、施工便利性等方面的影响因素,确定较优的连接过渡方式和过渡结构的参数尺寸,为船舶设计横梁端部节点形式的确定提供参考。     

装配式综合管廊在地铁车辆基地中的发展及应用探讨

装配式综合管廊在地铁车辆基地中的应用尚处于探索阶段,为了将装配式综合管廊与地铁车辆基地有效结合,提出一种适合于地铁车辆基地的装配式综合管廊解决方案。系统研究车辆基地发展装配式管廊的可行性,从目前车辆基地综合管廊建设和运营现状出发,提出了单仓和双仓两种管廊断面模式。通过应用BIM技术对管线进行碰撞检查和节点深化设计,并在管廊设计中考虑相关附属配套设施。工程实践证明,装配式综合管廊比现浇管廊土建成本减少4%,工期缩短45%,从安全、环保、质量、工期、场地、运维等多方面具有明显优势,应大力推广。下阶段应从标准化设计、施工方面对装配式管廊进行系统研究并争取尽快应用到实际项目中。     

大跨度钢箱梁斜拉桥中跨合龙关键技术

以4座主跨超过400 m的钢箱梁斜拉桥中跨合龙控制为背景,对大跨度钢箱梁斜拉桥中跨合龙的2种方法进行对比分析,对合龙各主要工序的关键技术进行研究。提出了合龙段配切长度的计算公式和合龙口宽度连续观测的测点布置方式。建议:在调整好合龙口姿态后可不加压重,也可不采用临时劲性骨架锁定;采用无线采集设备采集合龙口结构的温度场,用激光测距仪测量合龙口宽度以提高观测效率和安全性;在悬臂施工阶段关注梁长累计误差并通过调整后续梁段的制造长度消除之。