海湾大桥北引道沥青混凝土罩面设计

结合广东省汕汾高速公路汕头海湾大桥北引道路面加铺工程,分析软基路段过渡性路面的病害,提出沥青混凝土路面罩面结构设计和施工中须注意的问题.     

风积沙的毛细性及其盐胀的室内试验研究

通过毛细水上升高度试验，得出了风积沙在最佳含水量、不同压实度条件下的毛细水上升高度数据；通过室内盐胀试验得到了不同含盐量风积沙的盐胀量，并分析了含盐量及温度与盐胀量的关系。     

基于剩余充电电量的锂离子电池组容量快速估计方法

针对传统锂离子电池组容量确定方法存在的效率低、能耗高且只能离线应用等问题,提出一种基于电池剩余充电电量的锂离子电池组容量快速估计方法。首先,基于充电电压曲线一致性原理,以电池组内率先充电至充电截止电压的电池单体电压曲线为基准,通过电压曲线的平移缩放与线性插值计算出各单体电池的剩余充电电量与剩余充电时间,从而实现各单体电池的荷电状态(State of Charge, SOC)在线估计,在此基础上实现电池组容量的快速估计。其次,在电池单体模型的基础上建立电池组的仿真模型,并在全SOC区域上对模型参数进行分段辨识。通过所建立的仿真模型得到电池组的充放电曲线,并对电池组容量进行估计。最后,对4个单体串联而成的电池组进行充电试验。研究结果表明:仿真容量与估计容量误差为1.2%以内,验证了所提出的容量快速估计算法的有效性;利用所提方法估计出电池组容量与试验得到的电池组容量的误差为2.61%;该方法根据电池充电曲线的平移与缩放即可在线估计出电池组容量,可应用于新电池组容量的在线快速估计,能在保证3%估计误差的基础上将检测效率提高到传统方法的2倍以上。     

Does crowding affect the path choice of metro passengers?

This paper investigates crowding effect on the path choice of metro passengers. We show people reroute not only to avoid the delay from crowding but also to evade crowding itself. More specifically, a logit model fits best when it uses the transit delay from crowding as well as the passenger load of a connection in addition to the conventional explanatory variables. Also, we demonstrate that crowding decreases the overall welfare of metro passengers. The model is tested on the real path choice data acquired by the recent algorithm by Hong et al. (2015) known to detect the real path choice from Smart Card data in more than 90% of the cases.     

Local joint flexibility of tubular X-joints stiffened with external ring or external plates

In the present paper, the Local Joint Flexibility (LJF) of the ring-stiffened X-joints and plate-stiffened X-joints under compressive load is investigated. In the first phase, a finite element (FE) model was generated and verified with the results of available experimental tests and equations. In the next phase, a set number of 234 FE models were created to evaluate the role of the external ring size (β_r and τ_r), the external plate size (β_p and τ_p), and the connection geometry (γ, τ, and β) on the LJF factor (f_LJF). In these FE models, the weld connecting the chord and brace members was generated. The results indicated that the f_LJF of a plate stiffened joint can be down to 76% of the f_LJF of the corresponding un-stiffened joint. Also, the effect of the ring size on the f_LJF was more than the effect of the plate size on the f_LJF, because of the stiffener position. Despite the notable effect of the ring and the plate on the f_LJF, there is not any study or formula on tubular connections stiffened with ring or plate. Therefore, the FE results were used to propose two parametric formulas for determining the f_LJF in X-joints with external ring or external plate under brace compressive load. Moreover, the derived formulas were checked based on the UK DoE acceptance criteria.     

Human-like autonomous car-following model with deep reinforcement learning

This study proposes a framework for human-like autonomous car-following planning based on deep reinforcement learning (deep RL). Historical driving data are fed into a simulation environment where an RL agent learns from trial and error interactions based on a reward function that signals how much the agent deviates from the empirical data. Through these interactions, an optimal policy, or car-following model that maps in a human-like way from speed, relative speed between a lead and following vehicle, and inter-vehicle spacing to acceleration of a following vehicle is finally obtained. The model can be continuously updated when more data are fed in. Two thousand car-following periods extracted from the 2015 Shanghai Naturalistic Driving Study were used to train the model and compare its performance with that of traditional and recent data-driven car-following models. As shown by this study’s results, a deep deterministic policy gradient car-following model that uses disparity between simulated and observed speed as the reward function and considers a reaction delay of 1 s, denoted as DDPGvRT, can reproduce human-like car-following behavior with higher accuracy than traditional and recent data-driven car-following models. Specifically, the DDPGvRT model has a spacing validation error of 18% and speed validation error of 5%, which are less than those of other models, including the intelligent driver model, models based on locally weighted regression, and conventional neural network-based models. Moreover, the DDPGvRT demonstrates good capability of generalization to various driving situations and can adapt to different drivers by continuously learning. This study demonstrates that reinforcement learning methodology can offer insight into driver behavior and can contribute to the development of human-like autonomous driving algorithms and traffic-flow models.     

船舶通信英语口语与听力课程标准

结合船舶驾驶员的岗位职责,依照现代职业教育理论和成果,设计了船舶通信英语口语与听力课程标准.对该课程的课程概述、培养目标、与前后课程的联系、教学内容与学时分配、学习资源、教师要求、学习场地与设施要求、考核方式与标准、学习情境设计进行了设计和描述,将船舶通信中典型工作任务转化为学习型任务.     

加强教风学风建设 不断提高人才培养质量

在改革不断深入、经济社会深度转型的当下,大学生群体呈现出新的特点和个性。在新的形势下,要加强高校教风学风建设,更好的发挥高校培养人才的作用,促使人才培养质量提升。本文以辽宁省交通高等专科学校为例,着重从文化建设、教师育人能力提升、学生职业梦想等角度入手,提出了加强教风学风建设的具体举措和途径。     

使用聚合物对纯砂层进行渣土改良的试验研究

土压平衡盾构在不同的地层进行渣土改良的关键是选择合适的改良剂,纯砂层施工中最常用的改良剂就是膨润土泥浆,目前已开始尝试使用聚合物进行改良。本文选取3种典型的聚合物,研究聚合物溶液特性与聚合物浓度、搅拌时间和静置时间的关系,并选择合适的聚合物对粗砂试样进行塌落度试验、渗透试验和直剪试验的室内试验研究。研究结果表明,针对粗砂地层(含水率10%左右),0.3%的PAM聚合物溶液注入率为20%~25%时,能有效增强粗砂的流动性和黏聚性,降低渗透系数和摩擦因数,满足土压平衡盾构施工要求。