Strava Metro data for bicycle monitoring: a literature review

ABSTRACT

Monitoring bicycle trips is no longer limited to traditional sources, such as travel surveys and counts. Strava, a popular fitness tracker, continuously collects human movement trajectories, and its commercial data service, Strava Metro, has enriched bicycle research opportunities over the last five years. Accrued knowledge from colleagues who have already utilised Strava Metro data can be valuable for those seeking expanded monitoring options. To convey such knowledge, this paper synthesises a data overview, extensive literature review on how the data have been applied to deal with drivers’ bicycle-related issues, and implications for future work. The review results indicate that Strava Metro data have the potential—although finite—to be used to identify various travel patterns, estimate travel demand, analyse route choice, control for exposure in crash models, and assess air pollution exposure. However, several challenges, such as the under-representativeness of the general population, bias towards and away from certain groups, and lack of demographic and trip details at the individual level, prevent researchers from depending entirely on the new data source. Cross-use with other sources and validation of reliability with official data could enhance the potentiality.     

Travel time estimation from sparse floating car data with consistent path inference: A fixed point approach

Estimation of urban network link travel times from sparse floating car data (FCD) usually needs pre-processing, mainly map-matching and path inference for finding the most likely vehicle paths that are consistent with reported locations. Path inference requires a priori assumptions about link travel times; using unrealistic initial link travel times can bias the travel time estimation and subsequent identification of shortest paths. Thus, the combination of path inference and travel time estimation is a joint problem. This paper investigates the sensitivity of estimated travel times, and proposes a fixed point formulation of the simultaneous path inference and travel time estimation problem. The methodology is applied in a case study to estimate travel times from taxi FCD in Stockholm, Sweden. The results show that standard fixed point iterations converge quickly to a solution where input and output travel times are consistent. The solution is robust under different initial travel times assumptions and data sizes. Validation against actual path travel time measurements from the Google API and an instrumented vehicle deployed for this purpose shows that the fixed point algorithm improves shortest path finding. The results highlight the importance of the joint solution of the path inference and travel time estimation problem, in particular for accurate path finding and route optimization.     

An analysis of rail freight operational efficiency and mode share in the British port-hinterland container market

The growth in container shipping poses considerable challenges to efforts to reduce the negative externalities associated with freight transport. There are particular concerns about the impacts of the associated port-hinterland freight flows. Through empirical research, this paper examines trends in the operational efficiency of the British port-hinterland container rail freight market and to assess the impacts of any changes on the overall sustainability of this market. Original survey work conducted in 2007 and 2015 has allowed longitudinal and cross-sectional analysis of the characteristics of this market.The survey findings reveal that rail’s mode share of port container throughput (in TEU) has increased from 14.7% in 2007 to 16.6% in 2015 and it is likely that its share of the associated hinterland activity has also risen. Rail was carrying 25% more TEU by 2015 without an increase in train service provision. Increases in mean train capacity and mean load factor were observed, leading to growth in the mean train load from 44 TEU in 2007 to 55 TEU in 2015. This considerable improvement in operational efficiency is expected to have reduced the negative externalities per unit of transport activity associated with the rail-borne hinterland container flows, though scope is identified for further improvements in sustainability.     

A generic data assimilation framework for vehicle trajectory reconstruction on signalized urban arterials using particle filters

With trajectory data, a complete microscopic and macroscopic picture of traffic flow operations can be obtained. However, trajectory data are difficult to observe over large spatiotemporal regions—particularly in urban contexts—due to practical, technical and financial constraints. The next best thing is to estimate plausible trajectories from whatever data are available. This paper presents a generic data assimilation framework to reconstruct such plausible trajectories on signalized urban arterials using microscopic traffic flow models and data from loops (individual vehicle passages and thus vehicle counts); traffic control data; and (sparse) travel time measurements from whatever source available. The key problem we address is that loops suffer from miss- and over-counts, which result in unbounded errors in vehicle accumulations, rendering trajectory reconstruction highly problematic. Our framework solves this problem in two ways. First, we correct the systematic error in vehicle accumulation by fusing the counts with sparsely available travel times. Second, the proposed framework uses particle filtering and an innovative hierarchical resampling scheme, which effectively integrates over the remaining error distribution, resulting in plausible trajectories. The proposed data assimilation framework is tested and validated using simulated data. Experiments and an extensive sensitivity analysis show that the proposed method is robust to errors both in the model and in the measurements, and provides good estimations for vehicle accumulation and vehicle trajectories with moderate sensor quality. The framework does not impose restrictions on the type of microscopic models used and can be naturally extended to include and estimate additional trajectory attributes such as destination and path, given data are available for assimilation.     

Estimating traffic volumes for signalized intersections using connected vehicle data

Recently connected vehicle (CV) technology has received significant attention thanks to active pilot deployments supported by the US Department of Transportation (USDOT). At signalized intersections, CVs may serve as mobile sensors, providing opportunities of reducing dependencies on conventional vehicle detectors for signal operation. However, most of the existing studies mainly focus on scenarios that penetration rates of CVs reach certain level, e.g., 25%, which may not be feasible in the near future. How to utilize data from a small number of CVs to improve traffic signal operation remains an open question. In this work, we develop an approach to estimate traffic volume, a key input to many signal optimization algorithms, using GPS trajectory data from CV or navigation devices under low market penetration rates. To estimate traffic volumes, we model vehicle arrivals at signalized intersections as a time-dependent Poisson process, which can account for signal coordination. The estimation problem is formulated as a maximum likelihood problem given multiple observed trajectories from CVs approaching to the intersection. An expectation maximization (EM) procedure is derived to solve the estimation problem. Two case studies were conducted to validate our estimation algorithm. One uses the CV data from the Safety Pilot Model Deployment (SPMD) project, in which around 2800 CVs were deployed in the City of Ann Arbor, MI. The other uses vehicle trajectory data from users of a commercial navigation service in China. Mean absolute percentage error (MAPE) of the estimation is found to be 9–12%, based on benchmark data manually collected and data from loop detectors. Considering the existing scale of CV deployments, the proposed approach could be of significant help to traffic management agencies for evaluating and operating traffic signals, paving the way of using CVs for detector-free signal operation in the future.     

Modeling real-time human mobility based on mobile phone and transportation data fusion

Even though a variety of human mobility models have been recently developed, models that can capture real-time human mobility of urban populations in a sustainable and economical manner are still lacking. Here, we propose a novel human mobility model that combines the advantages of mobile phone signaling data (i.e., comprehensive penetration in a population) and urban transportation data (i.e., continuous collection and high accuracy). Using the proposed human mobility model, travel demands during each 1-h time window were estimated for the city of Shenzhen, China. Significantly, the estimated travel demands not only preserved the distribution of travel demands, but also captured real-time bursts of mobility fluxes during large crowding events. Finally, based on the proposed human mobility model, a predictive model is deployed to predict crowd gatherings that usually cause severe traffic jams.     

基于语义的可定制数据切分和动态加载方法

文章提供一种基于语义的可定制数据切分和动态加载方法，它能够对源数据库建立基于语义的元数据描述，根据不同用户的数据需求，依据数据的语义相关性，转化并归纳为通用的策略模版，基于策略进行数据的切割和数据的级联抽取。之后，采用容错式动态加载方法。这在一定程度上实现了异构数据库之间的批量数据迁移。     

Travel analytics: Understanding how destination choice and business clusters are connected based on social media data

Understanding how destination choice and business clusters are connected is of great importance for designing sustainable cities, fostering flourishing business clusters, and building livable communities. As sharing locations and activities on social media platforms becomes increasingly popular, such data can reveal destination choice and activity space which can shed light on human-environment relationships. To this end, this research models the relationship between characteristics of business clusters and check-in activities from Los Angeles County, California. Business clusters are analyzed via two lenses: the supply side (employment data by industry) and the demand side (on-line check-in data). Spatial and statistical analyses are performed to understand how land use and transportation network features affect the popularity of the identified clusters and their relationships. Our results suggest that a cluster with more employment opportunities and more types of employment is associated with more check-ins. A business cluster that has access to parks or recreational services is also more popular. A business cluster with a longer road network and better connectivity of roads is associated with more check-ins. The visualization of the common visitors between clusters reveals that there are a few clusters with outstanding strong ties, while most have modest ties with each other. Our findings have implications on the influence of urban design on the popularity of business clusters.     

长大货物车适应THDS轴温探测技术的研究

针对不适应THDS轴温探测系统的长大货物车,分析论证了现车轴箱改进方案适应THDS轴温探测的不足,并提出了轴箱优化方案。经计算、试验和装车验证表明,新轴箱可行、有效、安全,满足THDS轴温探测要求,保证了长大货物车运输安全。