重载货车摩擦缓冲器阻抗特性的数值模拟

为预测摩擦缓冲器的实际工作状态,从几何特征和作用原理的角度,建立详细的MT-2型缓冲器理论模型。首先,通过对缓冲器内部各摩擦元件的运动学和静力学分析,推导出缓冲器在准静态下的阻抗特性;其次,引入附加摩擦系数量化各摩擦元件之间动静态摩擦过渡时的黏滞补偿,并模拟出缓冲器在动态下的阻抗特性;最后,利用C80型货车冲击试验数据对该缓冲器的理论模型进行验证。验证结果表明:总体上,数值模拟和现场试验下的缓冲器示功曲线基本吻合,说明模型的正确性;局部上数值模拟中缓冲器从加载Ⅰ阶段过渡至加载Ⅱ阶段的突变现象在冲击试验中表现的并不明显,还有待进一步完善。     

HXD1型机车自动驾驶系统设计与应用

主要介绍HXD1型交流传动电力机车的自动驾驶系统方案设计与应用情况,以机车改动最小、成本最低为原则,通过加装自动驾驶系统设备、通信及供电线缆实现自动驾驶功能。通过机车自动系统的成功运用,降低了人工劳动强度,杜绝了人为失误因素,提升了机车操纵水平和操纵一致性。     

地铁临时支援供电中压环网方案研究

因征地拆迁等原因,地铁主变电所及电缆通道常因工期滞后而需临时支援供电。针对临时支援供电问题研究其中压环网方案,提出了系统运行方式及可靠性、压降要求、倒接可行性和经济性4方面评价标准。以武汉地铁2号线南延线为例,提出3种临时支援供电方案。分别阐述了每种方案的运行方式,计算了环网压降,研究倒接方案的可行性和经济性。通过综合比较,总结出各方案的优缺点,提出注意事项,为后续工程提供思路。     

长大货物车适应THDS轴温探测技术的研究

针对不适应THDS轴温探测系统的长大货物车,分析论证了现车轴箱改进方案适应THDS轴温探测的不足,并提出了轴箱优化方案。经计算、试验和装车验证表明,新轴箱可行、有效、安全,满足THDS轴温探测要求,保证了长大货物车运输安全。     

基于车辆自动定位数据的有轨电车运行效率分析与应用

结合有轨电车线路的现有车辆自动定位数据,分析有轨电车运行效率及其相关影响因素.其中,影响因素从站台、路段、交叉口3个方面进行考虑.定性分析了不同站台型式、站台位置、交叉口类型的属性特征,并量化不同路段的路段长度、所包含的交叉口个数,同时考虑了交叉口控制策略对有轨电车运行时间的影响.以某已运营的有轨电车线路为例,通过建立...     

基于客户满意度的货运动车组开行方案研究

高铁货运逐渐兴起,本文对货运动车组开行方案优化进行了研究。针对高铁运输安全、快捷、运输成本较低等特性,提出以货运动车组及客货混编动车组为主,客运动车组捎带运输为补充的开行模式,结合运输需求、线路通过能力等限条件,以运输成本最小和货主满意度最大为目标,建立多目标综合优化模型,运用线性加权组合法,以lingo软件为依托进行求解。通过算例给出具体开行方案,并对同一运输区间各种运输方式的单位成本及用时进行对比分析。结果表明,相对于传统运输方式,高铁货运综合运输成本较低,用时更短,能够兼顾运输企业与货主的双重要求;所建模型优化效果明显,可为未来货运动车组的开行提供参考。     

基于侧斜的螺旋桨优化设计

螺旋桨的螺距、纵倾、侧斜、剖面参数等众多几何参数综合决定着螺旋桨的水动力性能,在进行螺旋桨优化设计的过程中,需要以这些参数为优化变量进行优化。本文以粒子群算法为工具,基于面元法理论,以侧斜为优化变量,推力系数为限制条件,敞水效率为优化目标,对螺旋桨进行优化设计。侧斜用贝塞尔曲线拟合方式进行表达,给定一定的变化范围,符合优化过程中的实际变化。对优化结果进行分析,螺旋桨敞水效率提高,同时改善了桨叶表面的压力分布,有利于延迟空泡的产生;优化桨在0-1的进速中敞水效率均比原桨提高。     

低排量下并联甩泵分析与对策

乌鄯原油支干线乌鲁木齐输油首站低排量下给油泵特殊工况并联运行极易出现甩泵故障,给输油生产带来困扰和设备危害。通过对几年来甩泵分析,找出原因,制定对策（提高来油温度、缩小过滤器差压报警值、流量计并行、降低外输排量等）,减少了并联运行次数,避免了并联甩泵现象的再次发生,为密闭输油生产中合理配泵提供参考。     

Environmental and transport effects of warehouse relocationing: evidence from Norway

Reducing traffic volumes and CO2-emissions from freight transport has proven difficult in many countries. Although the increasing suburbanization of warehouses is seen as a relevant land use trend, comprehensive analyses of their impact remain scarce. This study uses real data in modeling transport, costs, environmental and modal effects from warehouse relocations around Oslo and Trondheim (Norway). Results indicate that for Oslo, traffic performance (ton-km), CO2-emissions, and transport costs increase following warehouse suburbanization. For Trondheim, transport performance and CO2-emissions increase less, while transport costs decrease marginally. We conclude that specific case characteristics (geography and trade patterns) are important in determining the strength and direction of effects, and expect that common concomitant developments (warehouse centralization and consolidation) would lead to more pronounced results. Our findings confirm some, but challenge other, findings from the relatively scarcely literature available. Finally, the study's more general insights and observations can help advance similar analyses beyond Norway.     

Exchange rate and transport cost sensitivities of bilateral freight flows between the US and China

This paper explores the long-run impacts of gross domestic product, exchange rate, and transport costs on bilateral air and ocean freight flows between the US and China. The study employs a cointegration framework by using export and import data over the period of 2003:Q1-2014:Q2. Results show that gross domestic product is the key determinant of bilateral freight flows, indicating that real income of a trading partner is a driving force of the bilateral freight flows between the US and China. In examining the sensitivities of the bilateral trade flows, air freight flows are found to be more responsive to a real income change than ocean freight flows. The bilateral exchange rate is a significant factor affecting the freight flows from China to the US, suggesting that a US dollar appreciation against the Chinese yuan increases the inflows of Chinese commodities to the US. The impacts of the bilateral exchange rate and transport cost are found to vary at industry and commodity levels. These findings support the importance of employing disaggregate data in the bilateral freight flow analysis.