关于一、三级公路安全性认知因素的试验建模研究

在实测86处一级公路典型路段和188处三级公路典型路段道路结构基础上,确定驾驶员对国道一、三级公路的安全性认知因素集,进而针对一级公路的38处样本路段和三级公路的77处样本路段,组织47名驾驶人员进行现场认知评价试验,并应用模糊集合原理和模糊统计方法对评价试验得到的2829组(一级路673组、三级路2156组)有效认知试验评语数据进行分析处理,得到一、三级公路安全性认知因素的模糊评价隶属函数,从而给出驾驶人员对一、三级公路道路条件和交通环境的安全性模糊评价模型。     

基于实测数据评估交通事件检测中神经网络应用性的研究

神经网络为交通事件自动检测技术摆脱传统方法探测率低、误报率高的状况提供了新的解决思路。在以往局限于仿真数据研究的基础上,本文利用I-880数据库实测交通事件数据对神经网络在交通事件自动检测中的实际应用进行了研究,结果表明:神经网络应用于交通事件自动检测技术中,具有较高的探测率和较低的误报率,但该算法可移植性较差,在实际应用中要予以考虑。     

A new methodology for incident detection and characterization on surface streets

In this paper, a new methodology is presented for real-time detection and characterization of incidents on surface streets. The proposed automatic incident detection approach is capable of detecting incidents promptly as well as characterizing incidents in terms of time-varying lane-changing fractions and queue lengths in blocked lanes, lanes blocked due to incidents, and incident duration. The architecture of the proposed incident detection approach consists of three sequential procedures: (1) Symptom Identification for identification of incident symptoms, (2) Signal Processing for real-time prediction of incident-related lane traffic characteristics and (3) Pattern Recognition for incident recognition. Lane traffic counts and occupancy are the only two major types of input data, which can be readily collected from point detectors. The primary techniques utilized in this paper include: (1) a discrete-time, nonlinear, stochastic system with boundary constraints to predict real-time lane-changing fractions and queue lengths and (2) a pattern-recognition-based algorithm employing modified sequential probability ratio tests (MSPRT) to detect incidents. Off-line tests based on simulated as well as video-based real data were conducted to assess the performance of the proposed algorithm. The test results have indicated the feasibility of achieving real-time incident detection using the proposed methodology.     

基于Cruise软件的纯电动城市客车的建模与仿真

以某款纯电动城市客车为例,利用Cruise软件建立该电动城市客车的动力系统模型,并用此软件模拟得到其动力性能.通过理论对比计算,验证该方法的可行性.     

浅海信道宽带信号波形快速预报方法

随着信号处理技术的发展,对浅海信道传输特性的研究与利用日益受到重视。文章研究了浅海典型环境中水下宽带信号波形的快速数值预报方法。基于波束位移射线简正波（BDRM）理论,利用傅立叶方法求解宽带传播模型,在宽带模型计算过程中,通过宽带模型频域近似展开和模型并行化两种方式,实现快速准确的宽带信号波形预报。     

Much Ado about Nothing? - An analysis of economic impacts and ecologic effects of the EU-emission trading scheme in the aviation industry

From 2012 on, all CO₂ emissions from flights departing from or arriving at airports within the European Union have to be offset. We analyze the economic and ecological impacts that are caused by an inclusion of the aviation industry into the proposed emissions trading scheme (ETS). Building on the now fixed system design we employ a simulation model to estimate the impacts of the scheme. Our results indicate that financial impacts are highly dependant on external settings, such as allowance prices and demand growth. We show that the financial burden on the aviation industry will be rather modest in the first years after the introduction of the system and therefore induce only low competition distortions. Likewise, emission reductions within air transportation will be comparably low. While aviation will induce a decline of emissions in other sectors, significant absolute reductions within air transportation can only be reached by a more restrictive system design.     

Multi-criteria optimization of traffic signals: Mobility,safety, and environment

Two-dimensional multi-objective optimizations have been used for decades for the problems in traffic engineering although only few times so far in the optimization of signal timings. While the other engineering and science disciplines have utilized visualization of 3-dimensional Pareto fronts in the optimization studies, we have not seen many of those concepts applied to traffic signal optimization problems. To bridge the gap in the existing knowledge this study presents a methodology where 3-dimensional Pareto Fronts of signal timings, which are expressed through mobility, (surrogate) safety, and environmental factors, are optimized by use of an evolutionary algorithm. The study uses a segment of 5 signalized intersections in West Valley City, Utah, to test signal timings which provide a balance between mobility, safety and environment. In addition, a set of previous developed signal timing scenarios, including some of the Connected Vehicle technologies such as GLOSA, were conducted to evaluate the quality of the 3-dimensional Pareto front solutions. The results show success of 3-dimensinal Pareto fronts moving towards optimality. The resulting signal timing plans do not show large differences between themselves but all improve on the signal timings from the field, significantly. The commonly used optimization of standard single-objective functions shows robust solutions. The new set of Connected Vehicle technologies also shows promising benefits, especially in the area of reducing inter-vehicular friction. The resulting timing plans from two optimization sets (constrained and unconstrained) show that environmental and safe signal timings coincide but somewhat contradict mobility. Further research is needed to apply similar concepts on a variety of networks and traffic conditions before generalizing findings.     

Dynamic demand estimation and microscopic traffic simulation of a university campus transportation network

Abstract

This article documents the authors' experience with the modeling, simulation, and analysis of a university transportation system, using the TRansportation ANalysis and SIMulation System (TRANSIMS). The processes of data preparation and network coding are described, followed by the algorithm developed to estimate the dynamic 24-hour demand, which includes a procedure for estimating the ‘desirability’ of the different parking lots from readily available data. The dynamic demand estimation algorithm is validated by comparing estimated and observed parking lot occupancies, where it is shown that the algorithm is capable of replicating observed results. Finally, an example is included to demonstrate how the developed model can be used in campus transportation planning. Besides serving as a first case study for using TRANSIMS to model a university campus, the study's contributions include the development of a procedure for parking lot desirability ranking and a practical procedure for estimating dynamic demand on university campuses.     

汽车液压制动系统优化设计平台开发

根据企业实际项目需要,通过面向对象的程序设计思想,利用Visual C++开发了汽车液压制动系统计算分析软件。介绍了该软件的功能结构、设计流程等。以某车制动系统设计计算为例,对软件的计算、分析、参数化建模能力进行了验证。该软件平台通过ACCESS数据库,储存了大量经验数据和制动法规来辅助用户设计开发,能够精确计算制动系统的20余项内容以全面分析整车制动性能。     

基于Simulink/Stateflow的汽车ABS混合建模与仿真

汽车防抱死制动系统(ABS)是一种很关键的汽车主动安全技术。本文采用基于有限状态机的系统仿真方法,采用Simulink和Stateflow模块混合建模,对ABS模型中的连续系统和离散系统进行仿真。仿真结果表明,该混合仿真系统能比较真实地反映汽车ABS系统的实际工作过程,显著缩短制动距离,提高安全性。