室内夏季空调冷凝热回收系统模拟分析

针对宾馆空调冷凝热回收中冷凝热和热水供应规律之间的不匹配性问题,提出了单、双台水-水热泵及其辅助设备热回收方案,通过系统数值模拟,发现采用双台热泵系统能够满足热水需求,解决冷凝热排热不匹配问题,达到了较好的节能效果．     

Adsorption models and structural characterization for activated carbon fibers

The nitrogen adsorption isotherms at 77.69 K were measured for two samples of activated carbon fibers and their microstructures were investigated. Among established isotherm equations, the Dubinin-Radushkevich equation showed the best agreement with the experimental data, while the Langmuir equation showed a large deviation when employed at low relative pressures. The MP method, t-method and αs-method were used to analyze the pore size distribution. The calculated average pore widths and BET (Brunauer-Emmett-Teller) surface areas for the sample A-13 were 0.86 nm and 1 286.60 m2/g, while for the sample A-16, they were 0.82 nm and 1 490.64 m2/g. The sample with larger pore width was more suitable to be used as additive in chemical heat pumps, while the other one could be used as adsorbent in adsorption refrigeration systems.     

TiO_2-磷钨酸复合膜的制备及其性能

采用溶胶-凝胶法在导电载玻片上制备均匀透明的纳米TiO2薄膜,并以此薄膜作为基体电极,在浓度为0.50 mol/L的H2SO4溶液中用恒电位法制备了TiO2-磷钨酸修饰电极,用SEM分析了不同薄膜的结构,并对其电阻率,电化学行为与光电特性进行了初步研究.实验结果表明,制备TiO2-H3PW12O40复合膜的最优化合成条件为:5.0×10-3mol/L磷钨酸(H3PW12O40)+5.0×10-3mol/L吡咯(PY)+0.5 mol/LH2SO4的混合溶液中于1.4 V恒电压下电沉积60 m in.     

一汽大柴电控单体泵国Ⅲ柴油发动机——CA6DE3系列柴油机电气原理及使用维护（Ⅰ）

阐述大柴国Ⅲ电控单体泵发动机的基础知识;论述电控单元（ECU）设计与应用关系;分析国Ⅲ机的常见故障;介绍国Ⅲ机排除故障的方法;强调设计与维修人员正确掌握科技信息的重要性。     

混凝土输送泵长距离泵送技术的应用

通过对隧道二次衬砌机械配套施工模式的技术经济分析,阐述了短隧道二次衬砌采用混凝土长距离泵送技术的可行性。为充分发挥混凝土输送泵的效率提供了参考,也为隧道施工项目的安全质量和成本控制提出了较好的建议。     

某型汽轮燃(滑)油泵液压速关系统的改进

分析了现有节流垫片对某型汽轮燃(滑)油泵液压速关系统修后调试工作量的影响,指出其结构设计存在需要改进的地方;提出了用可调节的阀取代传统节流垫片的方案,可有效减少调试的人力物力。     

Nonlinear Predictive Control for PEMFC Stack Operation Temperature

Operating temperature of proton exchange membrane fuel ceil stack should be controlled within a special range. The input-output data and operating experiences were used to establish a PEMFC stack model and operating temperature control system. A nonlinear predictive control algorithm based on fuzzy model was presented for a family of complex system with severe nonlinearity such as PEMFC. Based on the obtained fuzzy model, a discrete optimization of the control action was carried out according to the principle of Branch and Bound method. The test results demonstrate the effectiveness and advantage of this approach.     

某轮主机滑油系统故障分析与对策

文章对一起由于滑油自清洗滤器引起的主机备用滑油泵频繁启动的故障进行分析和研究,提出相应处理措施和防止此类故障的对策,为主机滑油系统优化设计和维护管理提供参考。     

基于VC++的船舶离心泵评估系统开发

以船用多级离心泵为研究对象,利用虚拟现实技术,实现虚拟环境下的交互拆装。根据评估系统的需求分析,选用VC＋＋6.0软件开发工具,对拆装过程的评估系统进行开发。对拆装顺序进行量化,根据制定出的评估标准,实现实时显示评估成绩。     

给水泵汽轮机的气动分析

对给水泵汽轮机进行了整级的三维粘性流的数值模拟,揭示了该汽轮机存在的气动问题,在第一列动叶栅前缘流场区域会产生激波和普朗特-迈耶波,影响机组的性能．