Integrating a traffic router and microsimulator into a land use and travel demand model

Abstract

This paper describes one of the first known attempts at integrating a dynamic and disaggregated land-use model with a traffic microsimulator and compares its predictions of land use to those from an integration of the same land-use model with a more traditional four-step travel demand model. For our study area of Chittenden County, Vermont, we used a 40-year simulation beginning in 1990. Predicted differences in residential units between models for 2030 broken down by town correlated significantly with predicted differences in accessibility. The two towns with the greatest predicted differences in land use and accessibility are also the towns that currently have the most severe traffic bottlenecks and poorest route redundancy. Our results suggest that this particular integration of a microsimulator with a disaggregated land-use model is technically feasible, but that in the context of an isolated, small metropolitan area, the differences in predicted land use are small.     

Development of origin–destination matrices using mobile phone call data

In this research, we propose a methodology to develop OD matrices using mobile phone Call Detail Records (CDR) and limited traffic counts. CDR, which consist of time stamped tower locations with caller IDs, are analyzed first and trips occurring within certain time windows are used to generate tower-to-tower transient OD matrices for different time periods. These are then associated with corresponding nodes of the traffic network and converted to node-to-node transient OD matrices. The actual OD matrices are derived by scaling up these node-to-node transient OD matrices. An optimization based approach, in conjunction with a microscopic traffic simulation platform, is used to determine the scaling factors that result best matches with the observed traffic counts. The methodology is demonstrated using CDR from 2.87 million users of Dhaka, Bangladesh over a month and traffic counts from 13 key locations over 3 days of that month. The applicability of the methodology is supported by a validation study.     

A microscopic analysis of speed deviation impacts on lane-changing behavior

Driving behavior models that capture drivers’ tactical maneuvering decisions in different traffic conditions are essential to microscopic traffic simulation systems. This paper focuses on a parameter that has a great impact on road users’ aggressive overtaking maneuvers and directly affects lane-changing models (an integral part of microscopic traffic simulation models), namely, speed deviation. The objective of this research is to investigate the impacts of speed deviation in terms of performance measures (delay time, network mean speed, and travel time duration) and the number of lane-change maneuvers using the Aimsun traffic simulator. Following calibration of the model for a section of urban highway in Tehran, this paper explores the sensitivity of lane-changing maneuvers during different speed deviations by conducting two types of test. Simulation results show that, by decreasing speed deviation, the number of lane changes reduces remarkably and so network safety increases, thus reducing travel time due to an increase in network mean speed.     

Computing the cost of traffic congestion: a microsimulation exercise of the City of Antofagasta,Chile

Abstract

This paper computes the cost of traffic congestion in the city of Antofagasta in Chile. A microsimulation is implemented where all the agents of the system travel across the transport network. The congestion cost is computed through the aggregation of the opportunity cost of people waiting within the transport system, as a consequence of traffic congestion. Monte Carlo experiments produced an approximated congestion cost of US$1.02 million during a typical working day. Moreover, the simulation provides useful information about the average traveling time for the 14 districts of the city.     

基于微观仿真的远引掉头选址规划方法

为了在保障行车安全的前提下,提高远引掉头交通运行效率,分析了远引掉头措施的适用条件,定义了典型应用环境,提出了借鉴国外相关规范以及结合临近路口配时设计的远引掉头选址规划优化方法,并将规划方法放入典型应用环境中,采用微观仿真软件进行评价。仿真结果表明:两种选址规划方法下的远引掉头措施都优于直接左转,其中规范法使平均延误减少了约3.8s,结合配时设计的方法使平均延误减少了约6.8s。可见,在遵循规范的基础上,对临近路口配时进行优化,既保证了行车安全性,又能显著提高交通运行效率。     

微观仿真模型的建立及数据分析

在评价由道路系统以及交通量的改变而引起的交通行为特征变化时,交通微观仿真模型正迅速地成为首选的工具。交通微观仿真模型与传统分配模型在建立、产生结果和报告等方面存在某些共性,但也有很多不同之处。从对数据要求的讨论到模型的建立,介绍了应用微观仿真模型的全过程,并探讨了如何使用微观仿真模型对不同设计方案进行评价,进而分析各方案所产生的效果。     

Exploring the impact of connected and autonomous vehicles on freeway capacity using a revised Intelligent Driver Model

ABSTRACT

Connected and autonomous vehicle (CAV) technologies are expected to change driving/vehicle behavior on freeways. This study investigates the impact of CAVs on freeway capacity using a microsimulation tool. A four-lane basic freeway segment is selected as the case study through the Caltrans Performance Measurement System (PeMS). To obtain valid results, various driving behavior parameters are calibrated to the real traffic conditions for human-driven vehicles. In particular, the calibration is conducted using genetic algorithm. A revised Intelligent Driver Model (IDM) is developed and used as the car-following model for CAVs. The simulation is conducted on the basic freeway segment under different penetration rates of CAVs and different freeway speed limits. The results show that with an increase in the market penetration rate, freeway capacity increases, and will increase significantly as the speed limit increases.     

Microscopic simulation of transit operations: policy studies with the MISTRANSIT application programming interface

Abstract

Microscopic traffic simulators are the most advanced tools for representing the movement of vehicles on a transport network. However, the energy spent in traffic microsimulation has been mainly oriented to cars. Little interest has been devoted to more sophisticated models for simulating transit systems. Commercial software has some options to incorporate the operation of transit vehicles, but they are insufficient to properly consider a real public transport system. This paper develops an Application Programming Interface, called MIcroscopic Simulation of TRANSIT (MISTRANSIT), using the commercial microsimulator PARAllel MICroscopic Simulation. MISTRANSIT makes advances in three ways: public transport vehicles can have new characteristics; passengers are incorporated and traced as individual objects; and specific models represent the interaction between passengers and vehicles at stops. This paper presents the modelling approach as well as various experiments to illustrate the feasibility of MISTRANSIT for studying policy operations of transit systems.     

Including heavy vehicles in a car‐following model: modelling,calibrating and validating

Heavy vehicles influence general traffic in many different ways compared with passenger vehicles, and this may result in different levels of traffic instability. Increases in the number and proportion of heavy vehicles in the traffic stream will therefore result in different traffic flow conditions. This research initially outlines the different car‐following behaviour of drivers in congested heterogeneous traffic conditions indicating the necessity for developing a car‐following model, which includes these differences. A psychophysical car‐following model, similar in form to Weideman's car‐following model, was developed. Due to the complexity of the developed model, the calibration of the model was undertaken using a particle swarm optimisation algorithm with the data recorded under congested traffic conditions. This was then incorporated into a traffic microsimulation model. The results showed that the car‐following perceptual thresholds and thus action points of drivers differ based on their vehicle and the lead vehicle types. The inclusion of the heavy vehicles in the model showed significant impacts on the traffic dynamic and interactions amongst different vehicles. Copyright © 2016 John Wiley & Sons, Ltd.     

微观仿真在城市停车设施规划中的应用

为研究停车场规划和可达性对城市路网的影响,在世界范围内的三个不同城市应用微观仿真模型模拟停车设施规划。描述了三个城市采用的不同研究方法及得到的研究结果。三项研究都试图找到由驾驶人寻找停车位而造成的城市交通拥堵的解决方法。同时,在测试设计方案时,都使用了S-Paramics微观仿真模型。