LZH-25C沥青混合料转运车的应用研究

介绍了LZH-25C沥青混合料转运车在杭州—千岛湖高速公路上的应用，通过室内试验和现场检测．阐述了该型转运车的使用效果，证明了其能有效减小沥青混合料的级配离析和温度离析，提高沥青路面的均匀性。     

利用物理模型研究热扩散问题

山东威海华能电厂循环冷却水正态物理模型试验的目的是研究电厂设备冷却水排入海中后对海域及取水口的热污染问题,本文剖析了试验过程,内容包括电厂附近海域的自然条件分析、热扩散理论在模型中的应用、模型设计思想、试验设备量测系统与试验方法以及模型试验中需要探讨的问题。     

Global cutting-path optimization considering the minimum heat effect with microgenetic algorithms

This article considers microgenetic algorithms (GAs), which explore in a small population with a few genetic operators, for cutting-path optimization problems. The major difference between GAs and simple genetic algorithms (SGAs) is how to make a reproductive plan for an improved searching technique because of population choice. It is shown that GAs implementation reaches the near-optimal region much earlier than the SGAs approach, and the GAs give a better solution than simulated annealing (SA). The main objective was to determine what temperature distribution can be obtained from the solution of a travelling distributed heat source. The solution of the travelling heat source on nested raw plate provides information about the vertices of each nested part of the raw plate. From the fact that the initial temperature at a piercing point strongly depends on the heat flow which stems from the previous cutting contour, the temperature of all piercing points must be lower than the critical temperature after each cutting of the components of a part. The critical temperature is identified as the mechanical melting temperature of steels. A heuristic back-tracking method is introduced to find the near-optimum cutting path considering the minimum heat effect on deformation. The heuristic back-tracking method is incorporated with the GAs.     

A pseudofield model approach to simulate compartment-fire phenomena for marine fire safety design

In order to prevent the spread of marine compartment fires, it is necessary to understand the governing factors or characteristics of fire-spread phenomena. We present a pseudofield model approach to this problem. We first described a field model of turbulent heat convection based on a standard k – turbulence model. Two-dimensional numerical simulations of a two-linked compartment fire were carried out in order to predict the turbulent convection flow induced by the heat released from the fire. Then a more complicated fire-spread problem of multilinked compartment fires was analyzed by means of a zone model, in which the amounts of oxygen consumption and gas generation were solved by a gas-balance equations system. The effect of threshold conditions on fire propagation and the effect of the thickness of the heat insulation were investigated with numerical simulations.     

深圳地铁14号线黄木岗站三线换乘方案研究

深圳地铁14号线黄木岗站与既有7号线、近期规划24号线黄木岗站形成地下三线换乘车站，车站周边环境复杂。如何综合各种边界条件形成建筑功能完善，结构经济安全，同时又对周边环境影响最小的方案是本站研究的重点，特别是车站站位及换乘功能的研究。方案设计过程中，通过逐一梳理地面建筑、地下建(构)筑物、地面交通、片区规划、工程地质条件、客流预测、车站换乘功能等边界条件，总结黄木岗站立交桥安全、交通疏解、管线改迁、结构工法、施工器具选择、车站站位及换乘功能等重难点，采取逐项突破的方法，最终推演出“干”字形节点换乘方案，其中14号线采用地下3层双叠侧式车站，与7号线形成平行同台换乘，与24号线形成台-台换乘。     

水火弯板建模系统研究

以逐步回归分析和改进的Ｂ－Ｐ神经网络两种方法为算法,基于Ｍｉｃｒｏｓｏｆｔ Ｖｉｓｕａｌ Ｂａｓｉｃ３．０软件平台,应用实船板样本数据,开发了水火弯板局部收缩量的建模系统。     

深长桩荷载-位移曲线计算研究

近年来，城市及交通建设发展迅速，随着上部结构荷载的增大及容许沉降的减小，深长桩的应用越来越广泛。深长桩的力学性态分析成为桩基础研究中一个非常重要的组成部分，桩顶荷载一位移曲线是桩基础设计的核心内容。     

基于相对变形的大变形隧道地应力反算

针对复杂地质条件下高地应力大变形隧道地应力复杂多变的特点，为满足该类隧道动态设计对地应力资料的要求，提出基于上台阶开挖后拱腰水平收敛与拱顶下沉的相对比值并结合开挖揭示的围岩情况，建立二维数值模型反算地应力的方法。以丽江至香格里拉铁路中义隧道为例，对该方法进行详细说明。研究表明所述方法具有无需地应力测试、计算方便的优点，施工期间可用于地应力分析、预测。中义隧道典型区段地应力反算结果表明： 1）隧道出口及2号横洞工区的地应力分布特点并不相同； 2）围岩及埋深差别不大的区段，隧道水平收敛变形出现较大差异主要是由于地应力侧压力系数不同引起的。     

车辆侧翻的运动力学分析及预防措施

车辆转弯发生侧翻是最常见、最严重的交通事故之一。对车辆转弯的4种运动状态进行了力学分析，对“车轮下的奇迹”进行科学的压力测算，提出了防止车辆侧翻的具体措施。     

斜坡式防波堤堤心石动力特性试验研究

我国现行规范规定防波堤堤心材料为重量10～100 kg之间的块石,但实际工程往往很难达到这一重量范同的标准.如果利用重量范隔更大(如:1-800 kg)的块石作为堤心石,对整个斜坡堤的正常工作影响如何,同前国内对这方面的研究较少.因此,结合深水斜坡堤的丁程实例,利用模型试验,对不同重量范围的堤心石进行动力特性方面的研究.初步结论认为,1～800 kg块石作为堤心石,其动水压强较10～100 kg的值大,而静水压强较小.