城市轨道交通车载列车自动防护设备仿真检测平台研究

仿真测试是开展城市轨道交通信号系统相关技术研究的一种有效方法。利用商业虚拟仪器开发平台LabVIEW,讨论了车载ATP(列车自动防护)设备仿真检测系统研制的技术和方法。实践证明,该车载ATP设备仿真检测平台具有高效、灵活、低成本的特点。     

Connectivity analysis of the global shipping network by eigenvalue decomposition

ABSTRACT

Maritime shipping necessitates flexible and cost-effective port access worldwide through the global shipping network. This paper presents an efficient method to identify major port communities, and analyses the network connectivity of the global shipping network based on community structure. The global shipping network is represented by a signless Laplacian matrix which can be decomposed to generate its eigenvectors and corresponding eigenvalues. The largest gaps between the eigenvalues were then used to determine the optimal number of communities within the network. The eigenvalue decomposition method offers the advantage of detecting port communities without relying on a priori assumption about the number of communities and the size of each community. By applying this method to a dataset collected from seven world leading liner shipping companies, we found that the ports are clustered into three communities in the global container shipping network, which is consistent with the major container trade routes. The sparse linkages between port communities indicate where access is relatively poor.     

Contents Index Volume 35 and 36

Active safety systems would benefit from tyre force and friction potential information. Different sensor concepts, including, among others, the EU–funded Apollo–project developed tyre sensor based on optical position detection, are being studied. The sensor can measure tyre carcass deflections with respect to the rim. The carcass deflections can be used to calculate tyre forces and they may be exploited in the estimation of friction potential. The waveforms of the sensor signal are illustrated. The vertical and lateral force estimations are presented with unavoidable compensation parts. The tyre sensor measurements were compared to the measurement–vehicle results and good correlations achieved. Continuing activities are concerned with the estimation of friction potential and the detection of aquaplaning.     

Heavy duty vehicle rollover detection and active roll control

This paper presents the results of a comprehensive study on heavy-duty vehicle (HDV) roll stability improvement technology. The proposed rollover threat warning system uses the real-time dynamic model-based time-to-rollover (TTR) metric as a basis for online rollover detections. Its feasibility for implementation in a HDV rollover threat detection system is demonstrated through vehicle dynamic simulation studies. The research on the development of a rollover threat detection system is further enhanced in combination with an active roll control system using active suspension mechanism to improve heavy-duty trucks’ roll stability both in the static cornering and in emergency maneuvers. It has been demonstrated that the roll stability of typical heavy-duty trucks has been largely improved by the proposed active safety monitoring and control system.     

Fault-tolerant control of heavy-haul trains

The fault-tolerant control (FTC) of heavy-haul trains is discussed on the basis of the speed regulation proposed in previous works. The fault modes of trains are assumed and the corresponding fault detection and isolation (FDI) are studied. The FDI of sensor faults is based on a geometric approach for residual generators. The FDI of a braking system is based on the observation of the steady-state speed. From the difference of the steady-state speeds between the fault system and the faultless system, one can get fault information. Simulation tests were conducted on the suitability of the FDIs and the redesigned speed regulators. It is shown that the proposed FTC does not explicitly worsen the performance of the speed regulator in the case of a faultless system, while it obviously improves the performance of the speed regulator in the case of a faulty system.     

大直径盾构管片水平拼装试验方法探究

大直径盾构管片水平拼装试验存在效率低下甚至失败的情况,不能真实全面反映产品尺寸精度。分析其原因除大直径管片体积大、重量大的因素外,主要原因在于现有的试验设备工装简陋、试验方法粗放、规范要求低等。结合当前水平拼装的规范要求,分析现有试验方法存在的不足,对现有拼装设备工装进行改造,制定高标准的、更加严格的工艺措施,创造性地提出在每层管片拼装时增加标高检测的新思路。将新方法应用于南京长江第五大桥夹江隧道工程管片水平拼装试验,结果良好,证明了此试验方法的科学性与有效性。     

京珠高速公路隧道病害检测与处治对策研究

通过京珠高速公路隧道病害现场检测,对其主要病害进行了分类统计。考虑该隧道的勘察、设计、施工等因素影响,对该隧道主要病害产生原因进行了分析,在此基础上,对隧道病害等级进行了判定,并针对不同等级病害,提出了具体的处治措施。     

基于直流漏泄电流的无铠装电缆绝缘性能检测方法

电缆绝缘性能的好坏对供电系统连续运行具有重要意义。采用直流漏泄电流方法,提出一种无铠装电缆的绝缘性能检测方法。该方法把电缆两端电流的同步测量,转换成电缆输出端开路时输入端电流的准确测量,简化了测量的复杂性,提高了直流漏泄电流的测量精度,改善了电缆绝缘性能的诊断准确度。该法用于地铁牵引变电站直流馈线电缆绝缘性能检测中,取得了良好的效果。     

深基坑围护结构间断施工技术

上海轨道交通9号线九亭站2号出入口深基坑开挖采用SMW(劲性水泥土搅拌连续墙)工法围护,施工中由于受电力排管的影响,SMW工法围护结构需进行间断处理。在对电力排管进行悬吊保护后,通过静压钢板、槽钢施作间断部分的围护结构,再结合背后注浆防水,顺利地完成了基坑的开挖。结合工程施工情况对该处理技术进行了总结,以期对类似工程提供借鉴。     

管道泄漏检测技术研究进展

按照检测位置的不同,管道泄漏检测技术可分为管内检漏法和管外检漏法。后者根据检测对象的不同,又大致可分为直接检漏法和间接检漏法。文中总结了各种检漏技术的原理及优缺点,重点介绍了近年来迅速发展的基于软件的检漏方法,并预测这方面的研究将在很长一段时间内成为管道泄漏检测技术的热点。