一种改进的Jakes’信道模型及仿真

由于无线通信环境中存在的诸多不确定因素以及其在现代无线通信系统中的重要作用,合理的无线信道成为通信系统仿真研究的重要目的。确立信道仿真模型的目的就是为了尽可能的得到实际信道的统计特性,该文针对Jakes提出的信道模型,通过仿真来分析其局限性,并参考其中的谐波叠加（sum of sinusoids,SOS）法,来建立一种采用了随机分支增益、随机初始相位和有条件的随机多普勒频率改进的信道模型。     

板-桁模型计算钢筋混凝土构件抗扭强度综述

首先简单介绍了现有的钢筋混凝土构件抗扭强度计算的简化力学模型,并指出了板-桁模型提出的必要性,最后对板-桁模型进行了详细介绍,有关经验可供相关专业人员参考。     

工程项目管理集成化模式及发展趋势

项目管理集成化对提高项目管理公司或项目承包公司的核心竞争力具有重要意义,是未来我国工程总承包企业与国外企业竞争的关键领域。政府应引导国内大型工程公司向PMC方向发展,这不仅是提高国内工程公司项目管理水平的需要,也是带动我国工程建设业开拓国际市场的需要。     

大学计算机基础课程教学方式的改革与实践

随着信息技术和计算机技术迅速发展和普及,传统的计算机基础教学方式面临新的挑战。本文探讨了当前形势下大学计算机基础课程教学模式的改革方向,根据多年的教学实践,探讨了高校计算机基础教学改革模式。     

某出口米轨动车组(Tc车)车体设计及试验对比研究

介绍了使用大型通用计算机辅助工程软件ANSYS和有限元方法,对某出口米轨动车组(Tc车)进行了分析计算的过程,并通过实际物理样机试验数据与计算数据的比对,分析车身强度的可靠性。     

地铁车站大客流组织措施研究

针对地铁车站大客流组织问题,以天津地铁营口道站为具体研究对象,结合实际运营经验,对大客流组织原则、影响因素和应对措施进行较全面的探讨。首先,结合营口道站实际运营情况和一线工作经验,总结地铁车站的大客流组织原则;其次,从乘客乘坐地铁的流程入手,详细分析影响车站大客流组织的主要影响因素,定量化计算AFC系统服务能力、出入口及通道的通过能力、楼扶梯的通过能力、站台乘候车秩序？、列车运能和客流疏导能力等;最后,遵循大客流组织原则,针对影响大客流组织的主要因素,从客流预测、客流组织、行车调度和票务组织等方面提出具体的大客流组织应对措施。     

曾文水库永久河道放水道防淤改善工程介绍

为改善水库防淤营运功能,以加速水库治理及维持水库营运寿命,将台湾南部之曾文水库永久河道放水道控制闸门由何本阀(Howell Bunger valve)更换为射流闸门,除新设3条隧道分别提供施工维护及通气需求外,配合射流闸门闸室空间需求,将原何本阀闸室往上方扩建,并设置双轨电动吊车,解决何本阀因排砂磨损与空气量不足及后续设备维修更新运输等问题,于台洪期间优先开启射流闸门之设施,排除异重流或浑水潭高浓度泥砂,减少水库淤积与提高水库排砂效益,以提升水库营运操作之安全。     

Fuzzy and adaptive fuzzy control for the automobiles’ active suspension system

Two typical criteria for good vehicle suspension performance are their ability to provide good road handling and increased passenger comfort. The main disturbance affecting these two criteria is terrain irregularities. Active suspension control systems reduce these undesirable effects by isolating car body motion from vibrations at the wheels. This paper describes fuzzy and adaptive fuzzy control (AFC) schemes for the automobile active suspension system (ASS). The design objective is to provide smooth vertical motion so as to achieve the road holding and riding comfort over a wide range of road profiles. The efficacy of the proposed control schemes is demonstrated via simulations. With respect to the optimal linear quadratic regulator (LQR), it is shown that superior results have been achieved by the AFC.     

Experimental and numerical investigation on the derailment of a railway wheelset with solid axle

This paper presents the results of an experimental and numerical investigation on the derailment of a railway wheelset with solid axle. Tests were carried out under quasi-steady-state conditions, on a full-scale roller rig, and allowed to point out the effect of different parameters like the wheelset's angle of attack and the ratio between the vertical loads acting on the flanging and non-flanging wheels. On the basis of the test results, some existing derailment criteria are analysed in this paper and two new criteria are proposed. A model of wheel–rail contact is proposed for the mathematical modelling of the flange climb process, and numerical vs. experimental comparisons are used to obtain model validation.     

ISG hybrid powertrain: a rule-based driver model incorporating look-ahead information

According to European regulations, if the amount of regenerative braking is determined by the travel of the brake pedal, more stringent standards must be applied, otherwise it may adversely affect the existing vehicle safety system. The use of engine or vehicle speed to derive regenerative braking is one way to avoid strict design standards, but this introduces discontinuity in powertrain torque when the driver releases the acceleration pedal or applies the brake pedal. This is shown to cause oscillations in the pedal input and powertrain torque when a conventional driver model is adopted. Look-ahead information, together with other predicted vehicle states, are adopted to control the vehicle speed, in particular, during deceleration, and to improve the driver model so that oscillations can be avoided. The improved driver model makes analysis and validation of the control strategy for an integrated starter generator (ISG) hybrid powertrain possible.