基于长间隔大规模数据的地图匹配算法研究

随着GPS定位技术应用的日益推广,GPS技术被大量应用于公交车辆及出租车辆的定位与预测.公共交通调度中心的数据量和处理负荷将变得非常巨大,而且租用电信无线网络的费用也很高.如何使用尽可能少的数据得到比较好的定位信息和节约计算资源就成为我们面对的一个重要课题.针对杭州交通调度中心的出租车和公交车的大间隔定位信息,本文提出了一种将基于权值,道路拓扑和最优路径选择相结合的综合地图匹配算法,并应用于实际,取得了很好的效果.     

基于键图理论对安装EPS系统的车辆操纵稳定性的仿真分析

应用键图理论建立电动助力转向系统(EPS)的模型,将电动助力转向系统的键图模型和matlab的simulink仿真方框图相连接,并利用simulink的可视化功能实现汽车操纵稳定性的可视化仿真,仿真结果表明,将simulink仿真工具箱与键图模型相结合,可使汽车性能分析研究更为直观和简洁.     

Quasi-dynamic estimation of o–d flows from traffic counts: Formulation,statistical validation and performance analysis on real data

The paper proposes a “quasi-dynamic” framework for estimation of origin–destination (o–d) flow from traffic counts, under the assumption that o–d shares are constant across a reference period, whilst total flows leaving each origin vary for each sub-period within the reference period. The advantage of this approach over conventional within-day dynamic estimators is that of reducing drastically the number of unknowns given the same set of observed time-varying traffic counts. Obviously, the gain in accuracy depends on how realistic is the underlying assumption that total demand levels vary more rapidly over time than o–d shares. Firstly, the paper proposes a theoretical specification of the quasi-dynamic estimator. Subsequently, it proposes empirical and statistical tests to check the quasi-dynamic assumption and then compares the performances of the quasi-dynamic estimator of o–d flows with both classical off-line simultaneous dynamic estimators and on-line recursive Kalman filter-based estimators. Experiments are carried out on the real test site of A4–A23 motorways in North-Eastern Italy. Results confirm the acceptability of the assumption of quasi-dynamic o–d flows, even under the hypothesis of constant distribution shares for the whole day and show that the quasi-dynamic estimator outperforms significantly the simultaneous estimator. Data also suggest that using the quasi-dynamic estimates instead of the simultaneous estimates as historical o–d flows improves significantly the performances of the Kalman filter, which strongly depends of the quality of the seed o–d flows. In addition, it is shown that the aggregation of quasi-dynamic o–d estimates across subsequent time slices represents also the most effective way to obtain o–d estimates for larger time horizons (e.g. hourly estimates). Finally, a validation based on an hold-out sample of link flows (i.e. counts not used as inputs in the o–d estimation/updating process) revealed the quasi-dynamic estimator to be overall more robust and effective with respect to the other tested estimators.     

Experimental and finite element analysis of fatigue strength for 300 mm2 copper power conductor

The fatigue strength of a 300 mm² stranded copper conductor was investigated experimentally and by finite element (FE) analysis. An analytical model was also developed and validated. Wires taken from the outer layer of the conductor were fatigue tested in tension–tension loading and compared with similar data for wires taken from a 95 mm² conductor. The wire cross section was deformed due to the compacting process that was applied during fabrication. When corrected for stress concentrations due to the deformation the data for the two sets of wire fell within the same scatter-band. Full scale testing was carried out in a specially designed rig with constant tensile load and reversed displacement controlled bending with a fixed curvature variation. The loading is a simulation of the loading of a power cable hanging from a floating vessel through a bellmouth. Conductors were tested in two states; dry and lubricated. A finite element model was established for the copper conductor. The model was formulated by a combination of elastic beam and beam-contact elements that included the effects of friction. The effect of local bending due to contact forces was included in the model. Two contact conditions were investigated; the point (trellis) contact between adjacent layers of wire and the inline contact within each layer and between the first layer (centre wire) and the second layer. The FE model was validated by a calibration test of a full scale conductor, and by sensitivity studies varying the size and the number of elements of the model. Fatigue analysis of the conductor was carried out, based on the S–N curve for individual wires. Taking into account the effects of friction and local bending, agreement was obtained between predicted and experimental fatigue strength of the conductor, for the FE model as well as the analytical model.     

钢绞线斜拉索在狭窄空间内的特殊张拉工艺

对于塔内空间极其狭窄的斜拉桥，其斜拉索安装、张拉等极其困难。以贵州省某斜拉桥为例，介绍一种特殊、简便、高效、经济的斜拉索张拉施工方法，可以较好地解决因塔内空间狭窄而导致不便开展斜拉索相关工序的难题。     

Modelling parking choices considering user heterogeneity

We examine car driver’s behaviour when choosing a parking place; the alternatives available are free on-street parking, paid on-street parking and parking in an underground multi-storey car park. A mixed logit model, allowing for correlation between random taste parameters and estimated using stated choice data, is used to infer values of time, both when looking for a parking space and for accessing the final destination. Apart from the cost of parking, we found that vehicle age was a key variable when choosing where to park in Spain. We also found that the perception of the parking charge was fairly heterogeneous, depending both on the drivers’ income levels and whether or not they were local residents. Our results can be generalised for personalised policy making related with parking demand management.     

Behavior-consistent information-based network traffic control for evacuation operations

The evacuation operations problem aims to avoid or mitigate the potential loss of life in a region threatened or affected by a disaster. It is shaped to a large extent by the evolution of evacuation traffic resulting from the demand–supply interactions of the associated transportation network. Information-based control is a strategic tool for evacuation traffic operations as it can enable greater access to the affected population and more effective response. However, comparatively few studies have focused on the implementation of information-based control in evacuation operations. This study develops a control module for evacuation operations centered on addressing the demand–supply interactions by using behavior-consistent information strategies. These strategies incorporate the likely responses of evacuees to the information provided in the determination of route guidance information. The control module works as an iterative computational process involving an evacuee route choice model and a control model of information strategies to determine the route guidance information to direct evacuation traffic so as to approach a desired network traffic flow pattern. The problem is formulated as a fuzzy logic based optimization framework to explicitly incorporate practical concerns related to information dissemination characteristics and social equity in evacuation operations. Numerical experiments highlight the importance of accounting for the demand–supply interactions, as the use of behavior-consistent information strategies can lead evacuee route choices to approach the operator-desired proportions corresponding to the desired traffic pattern. The results also indicate that while a behavior-consistent information strategy can be effective, gaps with the desired route proportions can exist due to the discrete nature of the linguistic messages and the real-world difficulty in accurately modeling evacuees’ actual route choice behavior.     

User perspectives in public transport timetable optimisation

The present paper deals with timetable optimisation from the perspective of minimising the waiting time experienced by passengers when transferring either to or from a bus. Due to its inherent complexity, this bi-level minimisation problem is extremely difficult to solve mathematically, since timetable optimisation is a non-linear non-convex mixed integer problem, with passenger flows defined by the route choice model, whereas the route choice model is a non-linear non-continuous mapping of the timetable. Therefore, a heuristic solution approach is developed in this paper, based on the idea of varying and optimising the offset of the bus lines. Varying the offset for a bus line impacts the waiting time passengers experience at any transfer stop on the bus line.In the bi-level timetable optimisation problem, the lower level is a transit assignment calculation yielding passengers’ route choice. This is used as weight when minimising waiting time by applying a Tabu Search algorithm to adapt the offset values for bus lines. The updated timetable then serves as input in the following transit assignment calculation. The process continues until convergence.The heuristic solution approach was applied on the large-scale public transport network in Denmark. The timetable optimisation approach yielded a yearly reduction in weighted waiting time equivalent to approximately 45 million Danish kroner (9 million USD).     

A time‐staged multi‐objective network‐design model

A multi‐objective, time‐staged network‐design problem is formulated. Through transformation, the problem is decomposed into a set of single‐period, single‐objective problems. Lexicographic ordering is instrumental in effecting this transformation; it also allows a backward‐recursion algorithm to be applied using strong pruning criteria. Furthermore, monotonicity properties enable us to solve the problem using the familiar tree‐search algorithms. The solution method has several desirable properties — as shown by an example and a case study of Tripoli Province, Libya. First, the algorithm ensures continuity of project implementation over the multi time‐periods and provides optimality in later computational stages irrespective of the decision at an interim stage. Second, the algorithm tends to provide accessibility to unconnected regions in the study area at low user‐cost without employing weights to the two objective functions of accessibility and user‐cost efficiency. Such a property is deemed advantageous for suggesting transportation investments based purely on purchasing the greatest benefit for each dollar, with political neutrality strictly maintained.