城市轨道交通车辆最高运行速度的选择

研究目的:通过对影响列车最高运行速度的几大要素进行分析,寻找轨道交通车辆选型时确定列车最高运行速度等级的一般规律,从而达到节约能源、减少车底数的目的.研究结论:确定城市轨道交通车辆最高运行速度等级时一般以平均车站间距作为首要依据,车站间距约为3.4 km时,推荐选择列车最高运行速度120 km/h;当车站站间距约为2.3 km时,推荐选择列车最高运行速度100 km/h;当车站站间距约为1.5 km时,推荐选择列车最高运行速度80 km/h.     

强夯法施工锤重参数的合理选用

如何选择强夯处理工程地基中的有关施工参数，直接关系到地基的加固效果。在对常规方法确定参数的全面分析后，通过对下落锤体对地基土体的冲力作用研究，提出了在同一单击能量（机械提升能量）情况下，采用重锤低落距处理地基工程优于轻锤高落距强夯方案。     

Sampling of alternatives for route choice modeling

This paper presents a new paradigm for choice set generation in the context of route choice model estimation. We assume that the choice sets contain all paths connecting each origin–destination pair. Although this is behaviorally questionable, we make this assumption in order to avoid bias in the econometric model. These sets are in general impossible to generate explicitly. Therefore, we propose an importance sampling approach to generate subsets of paths suitable for model estimation. Using only a subset of alternatives requires the path utilities to be corrected according to the sampling protocol in order to obtain unbiased parameter estimates. We derive such a sampling correction for the proposed algorithm.Estimating models based on samples of alternatives is straightforward for some types of models, in particular the multinomial logit (MNL) model. In order to apply MNL for route choice, the utilities should also be corrected to account for the correlation using, for instance, a path size (PS) formulation. We argue that the PS attribute should be computed based on the full choice set. Again, this is not feasible in general, and we propose a new version of the PS attribute derived from the sampling protocol, called Expanded PS.Numerical results based on synthetic data show that models including a sampling correction are remarkably better than the ones that do not. Moreover, the Expanded PS shows good results and outperforms models with the original PS formulation.     

浅谈三角高程测量在麦地河电站中的应用

随着电磁波测距仪、全站仪的普及,EDM三角高程测量越来越受到关注,应用范围也不断扩大。本文仅结合一些工作中的实例作了简略的阐述。     

应用模糊数学优化潭邵高速公路软基处理方案

地基方案的优化选择,就是使所选的地基方案满足多种要求。地基方案的优化受技术、经济、环保等多项指标的影响。聚类分析是模糊数学中研究物以类聚的一种多元分析方法。针对潭邵高速公路软土地基处理的特殊性,应用模糊数学理论对工程设计方案中的模糊性进行了分析,最终确定,潭邵高速公路软土地基,采用砂桩处理方案进行加固。     

The multinomial logit model revisited: A semi-parametric approach in discrete choice analysis

The multinomial logit model in discrete choice analysis is widely used in transport research. It has long been known that the Gumbel distribution forms the basis of the multinomial logit model. Although the Gumbel distribution is a good approximation in some applications such as route choice problems, it is chosen mainly for mathematical convenience. This can be restrictive in many other scenarios in practice. In this paper we show that the assumption of the Gumbel distribution can be substantially relaxed to include a large class of distributions that is stable with respect to the minimum operation. The distributions in the class allow heteroscedastic variances. We then seek a transformation that stabilizes the heteroscedastic variances. We show that this leads to a semi-parametric choice model which links the linear combination of travel-related attributes to the choice probabilities via an unknown sensitivity function. This sensitivity function reflects the degree of travelers’ sensitivity to the changes in the combined travel cost. The estimation of the semi-parametric choice model is also investigated and empirical studies are used to illustrate the developed method.     

Experimental design influences on stated choice outputs: An empirical study in air travel choice

Discrete choice experiments are conducted in the transport field to obtain data for investigating travel behaviour and derived measures such as the value of travel time savings. The multinomial logit (MNL) and other more advanced discrete choice models (e.g., the mixed MNL model) have often been estimated on data from stated choice experiments and applied for planning and policy purposes. Determining efficient underlying experimental designs for these studies has become an increasingly important stream of research, in which the objective is to generate stated choice tasks that maximize the collected information, yielding more reliable parameter estimates. These theoretical advances have not been rigorously tested in practice, such that claims on whether the theoretical efficiency gains translate into practice cannot be made. Using an extensive empirical study of air travel choice behaviour, this paper presents for the first time results of different stated choice experimental design approaches, in which respective estimation results are compared. We show that D-efficient designs keep their promise in lowering standard errors in estimating, thereby requiring smaller sample sizes, ceteris paribus, compared to a more traditional orthogonal design. The parameter estimates found using an orthogonal design or an efficient design turn out to be statistically different in several cases, mainly attributed to more or less dominant alternatives existing in the orthogonal design. Furthermore, we found that small designs with a limited number of choice tasks performs just as good (or even better) than a large design. Finally, we show that theoretically predicted sample sizes using the so-called S-estimates provide a good lower bound. This paper will enable practitioners in better understanding the potential benefits of efficient designs, and enables policy makers to make decisions based on more reliable parameter estimates.     

Assessing the cost of transfer inconvenience in public transport systems: A case study of the London Underground

Few studies have adequately assessed the cost of transfers² in public transport systems, or provided useful guidance on transfer improvements, such as where to invest (which facility), how to invest (which aspect), and how much to invest (quantitative justification of the investment). This paper proposes a new method based on path choice,³ taking into account both the operator’s service supply and the customers’ subjective perceptions to assess transfer cost and to identify ways to reduce it. This method evaluates different transfer components (e.g., transfer walking, waiting, and penalty) with distinct policy solutions and differentiates between transfer stations and movements.The method is applied to one of the largest and most complex public transport systems in the world, the London Underground (LUL), with a focus on 17 major transfer stations and 303 transfer movements. This study confirms that transfers pose a significant cost to LUL, and that cost is distributed unevenly across stations and across platforms at a station. Transfer stations are perceived very differently by passengers in terms of their overall cost and composition. The case study suggests that a better understanding of transfer behavior and improvements to the transfer experience could significantly benefit public transport systems.     

A topological route choice model for metro

This article presents a route choice model for public transit networks that incorporates variables related to network topology, complementing those found in traditional models based on service levels (travel time, cost, transfers, etc.) and users’ socioeconomic and demographic characteristics (income level, trip purpose, etc.). The topological variables represent concepts such as the directness of the chosen route and user knowledge of the network. For both of these factors, the necessary data is endogenous to the modelling process and can be quantified without the need for information-gathering beyond what is normally required for building route choice models. Other novel variables in the proposed formulation capture notions of user comfort such as vehicle occupancy rates and certain physical characteristics of network stations. We conclude that these new variables significantly improve the explanatory and predictive ability of existing route choice specifications.     

Modeling heterogeneous risk-taking behavior in route choice: A stochastic dominance approach

This paper proposes a unified approach to modeling heterogonous risk-taking behavior in route choice based on the theory of stochastic dominance (SD). Specifically, the first-, second-, and third-order stochastic dominance (FSD, SSD, TSD) are respectively linked to insatiability, risk-aversion and ruin-aversion within the framework of utility maximization. The paths that may be selected by travelers of different risk-taking preferences can be obtained from the corresponding SD-admissible paths, which can be generated using general dynamic programming. This paper also analyzes the relationship between the SD-based approach and other route choice models that consider risk-taking behavior. These route choice models employ a variety of reliability indexes, which often make the problem of finding optimal paths intractable. We show that the optimal paths with respect to these reliability indexes often belong to one of the three SD-admissible path sets. This finding offers not only an interpretation of risk-taking behavior consistent with the SD theory for these route choice models, but also a unified and computationally viable solution approach through SD-admissible path sets, which are usually small and can be generated without having to enumerate all paths. A generic label-correcting algorithm is proposed to generate FSD-, SSD-, and TSD-admissible paths, and numerical experiments are conducted to test the algorithm and to verify the analytical results.