钢管混凝土拱空间极限承载力高精度分析

采用考虑材料非线性的钢管混凝土拱空间极限承载力计算方法对1个X型双肋拱与1个平行双肋拱进行了空间极限承载力计算。在该方法中，对钢管混凝土拱结构采用纤维单元模型，该模型假定钢管与混凝土完全粘接，钢管对核心混凝土的套箍作用体现在以一维形式表达的核心混凝土的应力-应变关系曲线之中，针对材料非线性分析中单元内各点刚度参差不齐的特点，采用单元内设小元的方法(相当于子结构)，编制了非线性有限元程序，在该程序中，计算模型完全是基于小元层次进行的，比如单元刚度矩阵由小元刚度矩阵凝聚而成，单元节点的残余力由小元节点的残余力构成，故只需改变单元内小元个数这1个参数就可实现对结构的重新划分且极大地降低了非线性方程组的阶数，非常方便且实用。在程序计算结果得到模型试验结果验证的基础上，还对不同的横撑根数对结构空间极限承载力的影响进行了分析。     

高液限土的改良技术研究

高液限土主要分布于我国南方地区,是公路修筑中常见的特殊土之一,我国有关规范规定其不得直接用于路基的填筑。本文对广东某高速公路的高液限土进行了详细的室内稳定剂改良试验,得出了不同处治方法的改良效果。铺筑了采用康耐稳定剂改良的高液限土试验路,并进行了相应的观测,初步明确了康耐稳定剂改良高液限土路基的稳定效果。     

挖掘机电子控制系统(Ⅰ)

简述小松、大宇等挖掘机电子控制系统、电子功率优化系统和工作模式控制系统,介绍自动怠速装置的原理及故障诊断,详细论述电子油门和发动机电子控制系统工作原理及故障诊断。     

双速搅拌工艺

根据传统二次搅拌理论,提出了混凝土双速搅拌工艺,介绍了双速搅拌工艺的原理及优点,并指出了该工艺的实现方案.该工艺的应用可降低生产成本,提高混凝土的强度和生产率.     

高速铁路路基边坡纤维团粒喷播生态防护技术

针对高速铁路路基绿化工程高要求、少维护等特点,提出纤维团粒喷播技术,并详细阐述了其机理及特点.通过在京雄城际铁路路基边坡工程中的应用,归纳总结了该技术施工工艺流程:平整坡面→坡面覆土→铺设铁丝网→喷播基质→养护管理.喷播基质是利用喷播机械将性能优越的基质材料喷附至铁路路基坡面上的.工程应用表明该技术施工快,质量好,养护维修量小,经济性高.     

鱼雷发动机三组元比例控制器数值模拟

利用计算流体力学软件Pumplinx模拟鱼雷发动机中三组元比例控制器的内部流场,分析计算中不同压差情况下对比例控制器性能的影响,以及叶片与定子间间隙大小对于比例控制器性能的影响,同时对不同叶片数目下性能进行对比。计算结果表明:由于比例控制器为被动旋转马达结构,其转速和流量均随时间呈周期性脉动变化,随着工作压差增大,转速脉动幅度基本保持不变,而流量和扭矩脉动幅值增加;随着间隙增大,泄漏量增大,但流量、扭矩、转速脉动幅值大幅降低,出口流量较为平稳;叶片数目增多后比例控制器转速降低、排量降低。由计算结果推断出目前比例控制器的最优叶片数目为4。本文可为进一步研究比例控制器精度问题提供参考。     

变邻域搜索求解公共交通乘务调度问题

公共交通乘务调度问题是一个将车辆工作切分为一组合法班次的过程,它是NP难问题,许多求解方法的效率都与班次评价密不可分,本文通过裁剪TOPSIS方法(Technique for Order Preference by Similarity to an Ideal Solution)设计了TOPSIS班次评价方法.此外,通过裁剪变邻域搜索算法使之适合求解乘务调度问题,提出了基于变邻域搜索的乘务调度方法(Crew Scheduling Approach Based on Variable Neighbourhood Search,VNS),其中,并入了TOPSIS班次评价方法在调度过程中进行班次评价,设计了两种带概率的复合邻域结构以增加搜索的多样性,帮助跳出局部最优,在VNS中利用模拟退火算法进行局部搜索.利用中国公共交通中的11组实例进行了测试,测试结果表明,VNS优于两种新近提出的乘务调度方法,且其结果关于班次数接近于下界.     

Theory of safety surrogates using vehicle trajectories in macroscopic and microscopic settings: Application to dynamic message signs controlled traffic at work zones

This paper presents a new mathematical framework for obtaining quantitative safety measure using macroscopic as well as microscopic traffic data. The safety surrogate obtained from the macroscopic data is in terms of analysis performed on vehicle trajectories obtained from the macroscopic data. This method of obtaining safety measure can be used for many different types of applications. The safety surrogate for the traffic dynamics are developed in terms of a new concept of Negative Speed Differentials (NSD) that involve a convolution of vehicle speed function obtained from vehicle trajectories and then performing the integration of the square of the output for its negative values. The framework is applicable to microscopic traffic dynamics as well where we can use car following models for microscopic dynamics or the LWR model for macroscopic dynamics. This paper then presents the use of this new safety surrogate on the development of a feedback control law for controlling traffic in work zones using Dynamic Message Signs. A hybrid dynamics model is used to represent the switching dynamics due to changing DMS messages. A feedback control design for choosing those messages is presented as well as a simple simulation example to show its application.     

Mental models of driving and speed: biases,choices and reality

This paper provides a review of research performed by Svenson with colleagues and others work on mental models and their practical implications. Mental models describe how people perceive and think about the world including covariances and relationships between different variables, such as driving speed and time. Research on mental models has detected the time-saving bias [Svenson, O. (1970). A functional measurement approach to intuitive estimation as exemplified by estimated time savings. Journal of Experimental Psychology, 86, 204–210]. It means that drivers relatively overestimate the time that can be saved by increasing speed from an already high speed, for example, 90–130?km/h, and underestimate the time that can be saved by increasing speed from a low speed, for example, 30–45?km/h. In congruence with this finding, mean speed judgments and perceptions of mean speeds are also biased and higher speeds given too much weight and low speeds too little weight in comparison with objective reality. Replacing or adding a new speedometer in the car showing min per km eliminated or weakened the time-saving bias. Information about braking distances at different speeds did not improve overoptimistic judgments of braking capacity, but information about collision speed with an object suddenly appearing on the road did improve judgments of braking capacity. This is relevant to drivers, politicians and traffic regulators.     

Liner shipping network design with emission control areas: A genetic algorithm-based approach

To curb emissions, containerized shipping lines face the traditional trade-off between cost and emissions (CO₂ and SO_x) reduction. This paper considers this element in the context of liner service design and proposes a mixed integer linear programming (MILP) model based on a multi-commodity pickup and delivery arc-flow formulation. The objective is to maximize the profit by selecting the ports to be visited, the sequence of port visit, the cargo flows between ports, as well as the number/operating speeds of vessels on each arc of the selected route. The problem also considers that Emission Control Areas (ECAs) exist in the liner network and accounts for the vessel carrying capacity. In addition to using the MILP solver of CPLEX, we develop in the paper a specific genetic algorithm (GA) based heuristic and show that it gives the possibility to reach an optimal solution when solving large size instances.