排序方式: 共有23条查询结果,搜索用时 15 毫秒
1.
Bus Priority Using pre-signals 总被引:2,自引:0,他引:2
The need to provide efficient public transport services in urban areas has led to the implementation of bus priority measures in many congested cities. Much interest has recently centred on priority at signal controlled junctions, including the concept of pre-signals, where traffic signals are installed at or near the end of a with-flow bus lane to provide buses with priority access to the downstream junction. Although a number of pre-signals have now been installed in the U.K., particularly in London, there has been very little published research into their design, operation and optimisation. This paper addresses these points through the development of analytical procedures which allow pre-implementation evaluation of specific categories of pre-signals. The paper initially sets out three categories of pre-signal, which have different operating characteristics, different requirements for signalling and different impacts on capacity and delay. Key issues concerning signalling arrangements for these categories are then discussed, together with a summary of the analytical approach adopted and the assumptions required. Equations are developed to allow appropriate signal timings to be calculated for pre-signalised intersections. Further equations are then developed to enable delays to priority and non-priority traffic, with and without pre-signals, to be estimated with delay being taken here as the key performance criterion. The paper concludes with three application examples illustrating how the equations are applied and the impacts of pre-signals in different situations.The analyses confirm the potential benefits of pre-signals, where these signals apply to non-priority traffic only. Where buses are also subject to a pre-signal, it is shown that disbenefits to buses can often occur, unless bus detectors are used to gain priority signalling. 相似文献
2.
In this paper, three innovative car-sharing systems for urban areas are proposed, based on fleets of individual intelligent vehicles with three service characteristics: instant access, open-ended reservations and one-way trips. These features provide high flexibility but create an uneven distribution of vehicles among stations. Therefore, relocation of vehicles must be performed. Three different system procedures are proposed: in the first system, relocations are performed by users; in the other two, vehicles relocate automatically, thanks to their automation. In the first two systems, vehicles are accessible only at stations, whereas in the third they are also accessible along roads. In order to provide transport managers with a tool to test systems in different realities, an object-oriented simulator is developed. The simulation provides outputs of system performance, in terms of user waiting times and system efficiency. The proposed systems are simulated for the city of Genoa, in Italy, and a comparative analysis is presented. 相似文献
3.
Nick Harvey 《Coastal management》2013,41(2):139-149
Abstract This paper examines the management issues relating to the potential closure of the mouth of Australia's largest river. The importance of maintaining the river mouth is outlined, together with the implications of restricted river flow and the management response following the most recent closure of the mouth in 1981. One of the major unresolved issues is the question of responsibility and funding, which has arisen because of overlapping jurisdictions on either side of the river mouth and a lack of jurisdiction f or the mouth itself, which is an administrative boundary. 相似文献
4.
AbstractIndoor simulator and on-road instrumented vehicle are the most popular ways to analyze driving behaviors by using collected Vehicle Sensor Data (VSD). However, for a same driver, the driving performance could be different in the real world and in the simulated world. Even though many studies have been conducted to discover the differences of driving behaviors in these two circumstances, little research has focused on analyzing the differences in driving style, which can provide more integrated knowledge of a driver from the natural structure, stimulus–response mechanism, of driving behaviors. Therefore, in this paper, the driving styles in both the real world and the simulated world are extracted by implementing the nonnegative matrix factorization method on the collected VSD data. Through this analysis, the driving style differences can be quantitatively described and discussed in detail. It is found that the drivers tend to be more unstable and sometimes aggressive when driving the simulator and the deviation in the perception of temporal gap in two circumstances is also discovered. The research findings are particularly valuable to calibrate the driving simulator and construct more reliable driving behavior models. 相似文献
5.
Abstract This paper examines whether a dwell time reduction on a high-intensity metro service, as a result of a series of accessibility enhancements, can contribute to an increased level of service and accessible public transport for passengers together with a reduction in costs for the operator. Actual train operation data were collected by on-site observations and from London Underground Ltd. A simple simulation is built to represent the effect on the overall cycle times of trains if certain parameters (e.g. dwell time) are changed. Four models are developed, concerning: (1) step height between train and platform, (2) an assumption of passenger service time to be no longer than 20 s, (3) door width and (4) the combination of step height and door width. From the application of the models it appears that the fourth model provides the highest reduction in dwell time and diminishes the overall cycle times of trains. However, it is the most expensive to implement as it requires work to raise platforms and the purchase of new rolling stock. 相似文献
6.
Abstract Many researchers have been attracted by the phenomenon of constant travel time, and the time spent on travel has been an important indicator of understanding travellers’ behaviours. This paper is based on a survey conducted in a university in London which includes both objective and subjective variables in relation to commute time and some demographic characteristics. Two conceptual structural models are examined in order to explore the factors determining travellers’ choices. Results of the analysis reveal some interesting relationships: (1) a positive relationship between age and commute time; (2) females are more likely to read or listen to music during their journeys, and their ideal commute time (ICT) and current commute time (CCT) generally tend to be longer; (3) academic staff tend to have the habit of working during their commute, administrative staff tend to commute longer while students tend to spend a shorter time commuting; (4) normally, a habit while travelling is significantly associated with CCT; those with a habit of reading or working during their commute journey tend to have longer commute times and (5) the relationship between CCT and commuters’ ICT and tolerable commute time is positive; both hypothesised causal relationships are significant so that a loop is formed between subjective and objective variables, and thus a dynamic modelling process could be envisaged as temporal sequences of those variables. 相似文献
7.
There are a growing number of people with mobility impairments who use wheelchairs to get around the built environment. This number is likely to increase in the future due to an increasingly ageing population combined with advances in medical technology which help to overcome some of the barriers to access that have hitherto prevented people from leading as full a life as they would have liked. Footways form an integral part of the transport network and therefore it is essential they can be accessed by all people. Currently, however, there is no well-defined method to measure the accessibility of footways for wheelchair users. One aspect of a footway is the crossfall – the transverse gradient designed to facilitate surface water drainage – which adds to a wheelchair user's difficulty when progressing along the footway. This paper first reviews previous research on measuring the effect of crossfalls on wheelchair accessibility, highlighting the need for a new approach. It then proposes the Capability Model as a starting point for this new approach. The model is updated and populated with an initial capability set chosen to measure footway accessibility across footways with three different crossfall gradients (0%, 2.5% and 4%). The focus is on the physical work provided by the user to the wheelchair in order to keep it travelling in a straight line. It is shown that in order to travel in a straight line when a footway is flat only a single principal capability is required: the ability to produce sufficient force over the required distance to overcome the inertia and rolling resistance and keep the wheelchair moving at the chosen velocity. When a positive crossfall gradient is introduced a second capability is required: the ability to apply different levels of force to the left and right sides of the wheelchair. It is concluded that it is possible to measure these two capabilities and these provide a good insight into the effect of crossfalls on footway accessibility for wheelchair users. 相似文献
8.
R.M. Kimber M. McDonald N. Hounsell 《Transportation Research Part B: Methodological》1985,19(1):39-61
Passenger car units (pcus) are traditionally used to represent the effects of changes in traffic composition (the mix of cars, goods vehicles, buses, ad so on) on the saturation flows at traffic signal junctions. This paper describes in the results obtained by the two main methods of derivation of pcu values, regression analysis of asynchronous vehicles counts (asynchronous regression) and headway ratio methods, when applied to data from two large public road studies. The relationship between the various methods of derivation used is investigated. Regression analysis of synchronous vehicle counts, Webster's method, and headway ratio methods are seen to agree, but asynchronous regression necessarily gives lower results so long as there is variability in the headways of vehicles of a given class (e.g. in car-to-car headways). Alternative method of regression analysis of asynchronous counts is investigated but found to be biased, although les so than the existing method. Conventional asynchronous regression gives unbiased saturation flow estimates if unbiased prior pcu values are used. The effects of assumed pcu values on signal settings and consequent delays in subsaturation conditions are examined. Value corresponding to delay-minimising settings are close to the ratio of the mean headways of the appropriate vehicle classes. 相似文献
9.
欧洲铁路运输管理系统(ERTMS)由地面设备和车载设备组成.欧标司机室(Eurocab)是ERTMS车载设备的通称,包括:中心安全计算机(EVC)、与地面通信的设备(GSM-R)、人机界面设备(显示屏和控制盘, DMI)及与其他车载设备的接口(如制动、位置/速度检测设备等). 相似文献
10.