FRP正弦波形夹心桥面板的等效有限元模型

以FRP正弦波形夹心桥面板作为研究对象,得到等效正交各项异性实心板,通过理论分析和数值对比,证明了方法的可行性;采用该法对一实际的FRP正弦波形夹心板桥进行了模态分析。     

安中机械(深圳)物流设备制造公司前行在汽车尾板制造业道路上

在国内尾板制造行业中,安中机械(深圳)物流设备制造公司(以下简称安中机械)称得上是元老级的企业。这个建于1965年的老厂,在2003年进行改制,可渭是“老树换新颜”,这棵经历改制之后的“老树”将如何发展?安中机械(深圳)公司总经理雷养民为记者讲述了该公司的发展足迹。     

浅谈集装箱货物发生残损、短缺的类型与责任归属

集装箱在运输装卸过程中货物时有残损、短缺发生。为了便于现场检验鉴定人员、理货人员、保险理赔人员以及收发货人判明货物的残损、短缺的类型,区分其原因,明确责任归属;同时也便于收发货人或代理人找到责任方,提出索赔、挽回损失,现就集装箱货物的残损、短缺的判别方法、类型、责任归属及其检验鉴定证书的作用作一探讨。     

On the Design and Development of a Magneto-Rheological Mount

This paper evaluates the performance of a Magneto-Rheological (MR) mount. The mount incorporates MR fluid in a conventional fluid mount to open and close an inertia track between the fluid chambers of the mount. It is shown that such switching of the inertia track improves the mount's isolation effect by eliminating the large transmissibility peak that commonly exists at frequencies larger than the notch frequency for conventional fluid mounts. The switching frequencies of the MR mount are evaluated based on the parameters of the mount. A simple control scheme for switching the mount between the open and closed states is proposed, and the performance of the controlled mount is compared with conventional mounts. A sensitivity analysis is conducted to evaluate the effect of parameter errors in estimating the switching frequencies and mount performance. The results show that the switching frequencies can be accurately determined from mount parameters that are easily measured or estimated.     

Integrated approach to an optimal automotive timing chain system design

Ensuring engine efficiency is a crucial issue for automotive manufacturers. Several manufacturers focus on reducing the time taken to develop and introduce brand new vehicles to the market. Thus, a synergic approach including various simulations is generally adopted to achieve a development schedule and to reduce the cost of physical tests. This study involved proposing a design process that is very useful in the preliminary development stage through effective support from simulations. This type of simulation-based design process is effective in developing timing chain drives; the use of this process, based on results from multiple trials, showed improvements in performance including low friction and vibration, improved durability, and cost-effective part design when compared to conventional processes. This study proposes an integrated approach to the preliminary design of an automotive timing chain system. The approach involves structural and dynamic analyses. The details of the design process are described by using the case of a virtual engine. This study conducted and summarized a dynamic and structural analysis as well as topological optimization to describe a process to obtain optimal results. The results of this study indicated the following improvements in overall performance factors: 12.1 % improvement in transmission error, 10.1 % reduction in chain tension, 46 % reduction in tensioner arm weight, and 11 % reduction in transversal displacement.     

Development of railway station choice models to improve the representation of station catchments in rail demand models

ABSTRACT

This paper describes the development of railway station choice models suitable for defining probabilistic station catchments. These catchments can then be incorporated into the aggregate demand models typically used to forecast demand for new rail stations. Revealed preference passenger survey data obtained from the Welsh and Scottish Governments was used for model calibration. Techniques were developed to identify trip origins and destinations from incomplete address information and to automatically validate reported trips. A bespoke trip planner was used to derive mode-specific station access variables and train leg measures. The results from a number of multinomial logit and random parameter (mixed) logit models are presented and their predictive performance assessed. The models were found to have substantially superior predictive accuracy compared to the base model (which assumes the nearest station has a probability of one), indicating that their incorporation into passenger demand forecasting methods has the potential to significantly improve model predictive performance.     

Grant aiding rural local roads—an alternative approach

The paper points first to the significance of rural road expenditure in Australia and to the limited success of attempts to place grants for these roads within a framework of economic efficiency. Attention is then drawn to the merit good issue and to the findings of recent research which suggest that spatial equity and changing levels of aspiration are important determinants of road user attitudes. From this the authors conclude that disequilibrium between expected and actual road performance levels will be a salient characteristic and that road grants should be directed to reducing this discordance. A methodology for distributing grants is suggested and illustrated by reference to South Australian data.

     

Industrial water dependency: The BCDC experience

The Bay Conservation and Development Commission (BCDC), has designated a number of shoreline sites around San Francisco Bay for exclusive use of water‐related industry. This is intended both to reduce future needs for Bay fill, and to reserve those waterfront sites needed for long‐term industrial growth. The Commission currently defines water‐related industries as those “requiring”; a shoreline site for water transportation. The Commission is now considering the use of an economic criterion for identifying water dependency. This involves comparisons of the uniquely water‐related benefits and costs to the firm to locate on the shoreline, as opposed to its location at an inland site. By limiting use of deepwater sites to those industries that are significantly water‐dependent under this criterion, long‐term economic efficiency is served, and the need for future Bay fill for industrial growth is reduced. The data and analysis required to implement an economic water‐dependency criterion do not appear to be a barrier to use of such a test in the regulatory process. Whereas water dependency is an important concern to BCDC, other factors, including environmental constraints, must also be weighed when evaluating industrial projects.     

Experimental study on a model azimuthing podded propulsor in ice

The objective of this study was to investigate the performance of a model azimuthing podded propulsor in ice-covered water. Model tests were carried out with two different depths of cut into the ice (15 and 35 mm), two different ice conditions (presawn and pack ice conditions), and four different azimuthing angles. The depth of cut is the maximum penetration depth of the propeller blade into the ice block. The 0.3-m-diameter model propeller was operated in a continuous ice milling condition. Ice loads were measured by several sensors which were installed in various positions on the model. Six one-axis pancake-style load cells on the top of the model measured the global loads and two six-component dynamometers were installed on the shaft to measure the shaft loads. One six-component dynamometer was attached to the one of the propeller blades inside the hub to measure the blade loads. The pod unit and propeller performance in ice are presented. Ice-related loads, which were obtained when the blade was inside the ice block, are introduced and discussed. During the propeller–ice interaction, a blade can experience the path generated by the previous blade, which is called the shadowing effect. The effects of shadowing, depth of cut, azimuthing angle, and advance coefficient on propulsor performance are presented and discussed.     

Creep Life Prediction of Alloy 718 for Automotive Engine Materials

This study was carried out to investigate the creep life at the high temperature of the Alloy 718 for automotive engine components using the initial strain parameter method (ISPM). Creep tests have performed at elevated temperatures in the range of 550 oC to 700 oC in this work. We also carried out constant stress creep tests. The initial strains were measured during 1 minute after loading. Both the creep stress and rupture time depend on the initial strain. We calculated the creep life of Alloy 718 by using the creep life prediction equations obtained from the ISPM. Then, we compared the creep life predicted by the ISPM to the Larson-Miller parameter (LMP). The experimental rupture time and the calculated rupture time by using the ISPM agreed with a confidence level of 95 %. The creep life predicted by using the ISPM was in very good agreement with the creep life predicted using the LMP method.