单折线体外索对简支钢梁自振频率的影响

结构的自振特性关系到结构的健康安全,预应力系统作用到结构上会影响结构的自振频率.为考察体外预应力索系统对简支钢梁自振频率的影响,基于预应力系统作用机理并采用能量法建立了单折线布索型预应力钢梁的动力方程,求解此方程得到自振频率的计算公式,用此公式对一典型单折线索钢梁的一阶频率进行了计算,并与有限元模拟结果进行对比.结果表明:公式计算结果与有限元模拟结果基本一致,可用于工程设计.在此基础上,还得到了索预拉力、偏心距和截面积对梁自振频率的影响规律,为调节单折线布索型预应力钢梁的自振频率提供了理论依据.     

ROV attitude control based on multi-motor cooperative propulsion北大核心CSCD

[目的]为了提高遥控水下航行器(ROV)在复杂水下环境中的姿态控制性能,开展多电机协同推进的ROV姿态控制研究。[方法]首先,针对多电机系统的结构和算法,分别提出一种基于PID速度补偿器的偏差耦合结构和一种新型非奇异终端滑模控制(SMC)算法,并设计一种新颖的基于多电机协同推进的ROV姿态控制方法;然后,建立ROV的运动学和动力学模型,开展推进器组推力建模分析、解耦简化ROV动力学模型研究;最后,设计一种ROV滑模姿态控制器。[结果]仿真结果表明,所提的结构和算法可提高多电机系统的抗干扰性、同步性和快速响应能力,进而提高ROV姿态控制系统的稳定性与鲁棒性。[结论]所提方法可为ROV姿态控制提供一种新的可用方案。     

Development and prospects of initial alignment method for strap-down inertial navigation system北大核心CSCD

Initial alignment technology is directly related to the navigation accuracy and startup time of the strap-down inertial navigation system (SINS), and has always been regarded as a challenging focal point in the research field of inertial navigation. This paper makes a comprehensive survey of SINS initial alignment technology, briefly introduces the basic principles of initial alignment without latitude, coarse alignment with known latitude and precise alignment, and points out their advantages, disadvantages and applicable conditions. The research and effects of existing initial alignment error suppression techniques are then analyzed and discussed. Finally, according to the problems of existing initial alignment methods and the development requirements of the carrier, the future research direction of SINS initial alignment technology is predicted. © 2022 Journal of Clinical Hepatology. All rights reserved.     

基于Cognex视觉的机器人自动搬运控制

针对企业原有生产圆盘类连接轴的工艺,设计了基于Cognex视觉的机器人自动搬运系统,将S7-300 PLC、Cognex视觉系统和FANUC机器人系统集成在一起,实现了1台机器人同时为铣床和车床2个加工系统自动上下料;通过Profibus总线和Ethernet通讯将PLC技术、视觉技术与工业机器人结合起来,发挥了工业以太网传输速度快、信号稳定的优势,提高了机器人的柔性取料能力;目前已应用在企业当中,提高了企业的自动化程度及生产效率,降低了企业的用工支出。     

货车篷布运用管理若干问题的研究

面临铁路实现跨越式发展及第五次大面积提速，为确保运行安全，牵动了铁路的各项基础设施、机具运用、运输管理的“提质提标”。当然，也势必辐射到篷布的运用质量和安全管理工作。然而，就目前篷布运用管理状况，无论是技术条件、管理模式，还是工作环境、作业标准，已亟不适应“提速”的技术、安全和管理的要求。因此，面对铁路发展的宏观要求，务必从科学管理的思想方法上，研讨篷布运用管理滞后于“提速”发展的问题。     

微波介质材料与器件的现状与发展

介绍国内外微波介质材料的发展历史以及现状,比较国内外微波介质材料的发展水平。总结基于微波介质材料的器件应用,同时展望微波介质材料及其器件的发展趋势。     

Shape Optimization of Elliptical Road Containers Due to Liquid Load in Steady-State Turning

A numerical analysis of liquid load in elliptical road containers undergoing a steady-state turning manoeuvre is presented for containers of unrestricted size and for containers of fixed capacity. The liquid load is expressed in terms of the horizontal and vertical forces and the overturning moment created by these forces around the middle bottom point of the container. The moment is obtained by integrating the liquid free-surface equation and using numerical calculation of the resulting expressions. An optimization study with an objective to minimize the peak overturning moment is performed on containers of fixed capacity to identify the optimal height/width ratio of the container. The results of this investigation being of a general nature, i.e. with no restriction for an application, are particularly intended for road tankers under a steady turning manoeuvre, where they can be applied with high degree of accuracy.     

Dynamics of Tracked Vehicles

This paper provides a brief review of the state-of-the-art of tracked vehicle dynamics, including mobility over soft terrain, ride dynamics over rough surfaces and manoeuvrability. It is found that considerable progress has been made in the development of analytical frameworks for evaluating and predicting tracked vehicle mobility over soft terrain, taking into account the characteristics of terrain response to normal and shear loading. Certain computer simulation models for tracked vehicle mobility have been gaining increasingly wide acceptance by industry and governmental agencies in product development and in procurement. It is also found that most of the research on tracked vehicle ride dynamics and manoeuvrability is confined to operations on rigid surfaces. To achieve a realistic evaluation and prediction of the dynamic behaviour of tracked vehicles in the field, the key is to have a better understanding of terrain response to dynamic vehicular loading, including its dynamic stiffness and damping. Challenges that face vehicle dynamicists in this emerging field are identified.     

新型道路养护车的开发及其可行性分析

从公路发展对养护工作的要求出发，对目前以小四轮牵引车为主要机型的养护机具进行了分析，探讨了开发新型道路养护车的必要性和开发原则，并对其可靠性进行了经济评价。     

Active Roll Control for Passenger Cars

The development of a mathematical model of a limited bandwidth hydro-pneumatic suspension that is incorporated into a vehicle handling model is described. The combined model is used to evaluate a suitable control strategy for eliminating body roll during a cornering manoeuvre. The philosophy behind the roll control strategy has been to use feedback measurements of the body motions which do not compromise the ride control. A study of the influence of the position of the body motion feedback transducer on the effectiveness of the system to reduce the body roll is presented. Non-linear modelling of the suspension components for a 0.8g cornering manoeuvre has revealed performance limitations. Conclusions are drawn as to the effectiveness of the control scheme.