Network representation,continuum approximations and a solution to the spatial aggregation problem of traffic assignment

This paper complements the preceding one, which showed how one could modify equilibrium traffic assignment algorithms for networks with many centroids. In this one it is shown how one can substitute centroids by zones with continuous population densities. The technique, which is mathematically guaranteed to approximate a flow pattern in accordance with Wardrop's user equilibrium criterion, requires some geometrical calculations which can be handled off-line. With the suggested approach, it is possible to represent the spatial distribution of trip ends more realistically and this allows traffic assignment models to capture the effects of short and intrazonal trips in a way previously impossible. The method is shown to be computationally feasible.     

Clockwise hysteresis loops in the Macroscopic Fundamental Diagram: An effect of network instability

A recent study reported that the Macroscopic Fundamental Diagram of a medium size city exhibited a clockwise hysteresis loop on a day in which a major disturbance caused many drivers to use unfamiliar routes. It is shown below that, even in a perfectly symmetric network with uniform demand, clockwise loops are to be expected when there are disturbances, especially if the disturbances cause a significant fraction of the drivers to not change routes adaptively. It is also shown that when drivers are not adaptive networks are inherently more unstable as they recover from congestion than as they are loaded. In other words, during recovery congestion tends more strongly toward unevenness because very congested areas clear more slowly than less congested areas. Since it is known that uneven congestion distributions reduce network flows, it follows that lower network flows should arise during recovery, resulting in clockwise loops. Fortunately, the presence of a sufficient number of drivers that choose routes adaptively to avoid congested areas helps to even out congestion during recovery, increasing flow. Thus, clockwise loops are less likely to occur when driver adaptivity is high.     

Increasing the capacity of signalized intersections with separate left turn phases

A separate turn phase is often used on the approach leg to an intersections with heavy left turns. This wastes capacity on the approach because some of its lanes cannot discharge during its green phases. The paper shows that the problem can be eliminated by reorganizing traffic on all the lanes upstream of an intersection using a mid-block pre-signal. If drivers behave deterministically, the capacity that can be achieved is the same as if there were no left turns. However, if the reorganization is too drastic, it may be counterintuitive to drivers. This can be remedied by reorganizing traffic on just some of the available lanes. It is shown that such partial reorganization still increases capacity significantly, even if drivers behave randomly and only one lane is reorganized. The paper shows how to optimize the design of a pre-signal system for a generic intersection. It also identifies both, the potential benefits of the proposed system for a broad class of intersections, and the domain of application where the benefits are most significant.     

多种交通方式下的城市空间分配

从集计角度分析了运行多种交通方式的城市交通系统。利用目前已受关注的宏观基本图（简称MFD）,描述城市交通的整体特性。以旧金山某区为例,使用现有数据,通过仿真论证如何应用MFD监管真实交通网络。然后讨论了同一路网中不同交通方式间如何相互作用,以及如何将这些作用纳入包含多种交通方式路网的MFD。研究得到的两个主要结论是：1）证实了已有研究猜想——对市区拥挤区域限行,可提高包括被限行者在肉的所有出行者的机动性;2）公交方式提供专用道路空间可提高所有交通方式的可达性。     

Design and implementation of efficient transit networks: Procedure, case study and validity test

This paper presents and tests a method to design high-performance transit networks. The method produces conceptual plans for geometric idealizations of a particular city that are later adapted to the real conditions. These conceptual plans are generalizations of the hybrid network concept proposed in Daganzo (2010). The best plan for a specific application is chosen via optimization. The objective function is composed of analytic formulae for a concept’s agency cost and user level of service. These formulae include as parameters key demand-side attributes of the city, assumed to be rectangular, and supply-side attributes of the transit technology. They also include as decision variables the system’s line and stop spacings, the degree to which it focuses passenger trips on the city center, and the service headway. These decision variables are sufficient to define an idealized geometric layout of the system and an operating plan. This layout-operating plan is then used as a design target when developing the real, detailed master plan. Ultimately, the latter is simulated to obtain more accurate cost and level of service estimates.This process has been applied to design a high performance bus (HPB) network for Barcelona (Spain). The idealized solution for Barcelona includes 182 km of one-way infrastructure, uses 250 vehicles and costs 42,489 €/h to build and run. These figures only amount to about one third of the agency resources and cost currently used to provide bus service. A detailed design that resembles this target and conforms to the peculiarities of the city is also presented and simulated. The agency cost and user level of service metrics of the simulated system differ from those of the idealized model by less than 10%. Although the designed and simulated HPB systems provide sub-optimal spatial coverage because Barcelona lacks suitable streets, the level of service is good. Simulations suggest that if the proposed system was implemented side-by-side with the current one, it would capture most of the demand.     

Analyzing trade-offs between transportation,inventory and production costs on freight networks

The purpose of this paper is to determine optimal shipping strategies (i.e. routes and shipment sizes) on freight networks by analyzing trade-offs between transportation, inventory, and production set-up costs. Networks involving direct shipping, shipping via a consolidation terminal, and a combination of terminal and direct shipping are considered. This paper makes three main contributions. First, an understanding is provided of the interface between transportation and production set-up costs, and of how these costs both affect inventory. Second, conditions are identified that indicate when networks involving direct shipments between many origins and destinations can be analyzed on a link-by-link basis. Finally, a simple optimization method is developed that simultaneously determines optimal routes and shipment sizes for networks with a consolidation terminal and concave cost functions. This method decomposes the network into separate sub-networks, and determines the optimum analytically without the need for mathematical programming techniques.     

On the allocation of city space to multiple transport modes

Abstract

This paper analyzes urban multimodal transportation systems in an aggregated way. To describe the aggregate behavior of traffic in cities, use is made of an idea that is now receiving some attention: the macroscopic fundamental diagram (MFD). We demonstrate through simulation how the MFD can be used to monitor and control a real network, in this case a portion of San Francisco, using readily available input data. We then show how different modes interact on the same network and discuss how these interactions might be incorporated into an MFD for multimodal networks. The work unveils two main results: first, it confirms recent results showing that restricting access to a city's congested areas can improve mobility for all travelers, including those who endure the restrictions; and second, that dedicating street space to collective transport modes can improve accessibility for all modes, even those from which space is taken away.     

Aggregation with multinomial probit and estimation of disaggregate models with aggregate data: A new methodological approach

This paper describes an analytic aggregation procedure for disaggregate demand models similar to the one proposed in earlier publications by Westin (1974) and McFadden and Reid (1975). The technique, which uses a multivariate normal approximation for the distribution of the vector of attributes, is based on the multinomial profit algorithm proposed by Daganzo, Bouthelier and Sheffi (1977) and can be applied to an arbitrary number of alternatives. The procedure is computationally so efficient that it enables us to calibrate disaggregate models with aggregate data by maximum likelihood using the same or slightly modified codes developed for disaggregated data. The paper also contains a small scale numerical example intended to illustrate the important highlights of the aggregation-estimation problem.     

The length of tours in zones of different shapes

The object of this paper is to explain how the expected length of traveling salesman tours changes with zone shape. To do this, a simple strategy that yields good traveling salesman tours is presented. The resulting tours are suboptimal but appear to be close to those that can be obtained by hand. Thus, the formulas that are provided may also be indicative of the length of tours built with better strategies. The results of this paper are useful for the design of distribution systems.     

On the macroscopic stability of freeway traffic

A simple model of traffic flow is used to analyze the spatio-temporal distribution of flow and density on closed-loop homogeneous freeways with many ramps, which produce inflows and allow outflows. As we would expect, if the on-ramp demand is space-independent then this distribution tends toward uniformity in space if the freeway is either: (i) uncongested; or (ii) congested with queues on its on-ramps and enough inflow to cause the average freeway density to increase with time. In all other cases, however, including any recovery phase of a rush hour where the freeway’s average density declines, the distribution of flow and density quickly becomes uneven. This happens even under conditions of perfect symmetry, where the percentage of vehicles exiting at every off ramp is the same. The flow-density deviations from the average are shown to grow exponentially in time and propagate backwards in space with a fixed wave speed. A consequence of this type of instability is that, during recovery, gaps of uncongested traffic will quickly appear in the unevenly congested stream, reducing average flow. This extends the duration of recovery and invariably creates clockwise hysteresis loops on scatter-plots of average system flow vs. density during any rush hour that oversaturates the freeway. All these effects are quantified with formulas and verified with simulations. Some have been observed in real networks. In a more practical vein, it is also shown that the negative effects of instability diminish (i.e., freeway flows increase) if (a) some drivers choose to exit the freeway prematurely when it is too congested and/or (b) freeway access is regulated in a certain traffic-responsive way. These two findings could be used to improve the algorithms behind VMS displays for driver guidance (finding a), and on-ramp metering rates (finding b).