Leadership and Commitment in the Royal Navy ☆

What is proposed here is a relatively simple procedure by which a fleet manager may select the best mix of ships to provide a given transport service. The method is confined to non-liner trades and assumes the availability of more than enough suitable ships. It further assumes that unneeded ships can be placed in idle status (or returned to owner if chartered in) without penalty.

The objective of the procedure is to select the mix of available ships and sea speeds that can perform the required service at maximum profitability to the owner.     

Four decades of changing transport policy in Santiago,Chile

During the last forty years, Santiago has experienced a series of drastic changes in public transport policies. These changes have ranged widely, from total deregulation to processes that concentrated the management of public transport within the hands of the public sector.     

Spatio-temporal variations in deep-sea demersal communities off the Balearic Islands (western Mediterranean)

The spatial and temporal variations of deep-sea megafaunal assemblages from the western Mediterranean are analysed in the present paper. The assemblages from two locations of the Balearic Islands situated 120 km apart were compared using data collected seasonally on a bathymetric stratum covering the 150–750 m depth range during six bottom-trawl surveys. The assemblage structure, in terms of species composition, species dominance and population sizes, was differentially affected by the spatio-temporal variables analysed (depth, location and fishing period). Although depth was the main factor determining the assemblage composition, the differences obtained between the two locations were also relevant. On the upper slope these between-location differences in the dynamics of megafaunal assemblages were found to be related to the effect of fishing exploitation. Population size-based metrics and biomass spectra were good predictors of meso-scale fishing effects, and were mainly reflected by elasmobranchs and demersal teleosts. Nevertheless, the effects of fishing depended on the species considered. Two dominant large-sized fish species found on the upper slope in both localities, Galeus melastomus and Phycis blennoides, had higher biomass values associated with lower fishing effort. Although the mean body weight (MBW) of both species and also the mean maximum body weight (MMBW) of G. melastomus agreed with this pattern, the P. blennoides MMBW did not. This last case could be indicative of natural size-trends such as the bigger–deeper phenomenon which refers to the displacement of large individuals towards the deeper limit of their bathymetric distribution, beyond the maximum depth sampled in this study for this species. By contrast, the target species of the upper slope fishery, the red shrimp Aristeus antennatus, was not negatively affected by the direct impact of fishing activity and other environmental factors, such as the presence of specific water masses could also be important.     

Multi-agent simulation of adoption of alternative fuels

We have formalized and parameterized a model for the production of six transport fuels and six fuels blends from six feedstocks through 13 different production chains, and their adoption of by 11 distinct subpopulations of motorists. The motorists are represented by agents that use heuristics to choose a fuel on the basis of three attributes and a social feedback loop. Adoption of specific fuels is mostly driven by price differences, but other factors play a role if prices are similar. The results are not always intuitive and do not always show up immediately. We find that sustained combinations of interventions are required to bring about a transition away from petrol or diesel. Adoption of alternative fuels was most often confined to niche markets with a share of 5% or lower. Only in a single case was a complete fuel transition observed.     

无车日活动问答

过去的几十年里,人们一直围绕小汽车出行建造城市。为了方便车辆通行,占用了人行道路;为了建设道路基础设施,破坏了城市;在车祸中丧生的人数每年递增;不断制造出来的噪声和废气污染着我们的城市。而这些只是小汽车对社会所造成的一部分影响。     

New tyre-road contact model for applications at low speed

Most of the tyre models have been developed for high speed, combined forces, etc., however, in certain tests it is necessary to know tyre behaviour at very low speed in order to evaluate different systems. So, during vehicle inspection and maintenance of the steering and brake system, by means of sideslip tester and roller brake tester respectively, the forces transmitted by the tyres are measured; all of these inspections are carried out at low speeds. Furthermore, usually, automobile vehicles run at low speeds during an important part of their operating life (less than 60 km/h), mainly during urban traffic, and in steady state conditions. Therefore, it is particularly interesting to develop an accurate model of the contact patch tyrepavement for low speeds without the complexity of models that cover a wide speed range but provide less precision at very low speeds. The dynamometer plate has proved to be an appropriate test equipment to characterise the tyre-pavement contact at low speed and the steering geometry and wheel alignment. It has the feature of being able to carry out tests with the tyre installed in the vehicle as in completely real conditions. The main aim of this research is to set up a contact model between tyre and pavement at very low speed based on the measurement of longitudinal and lateral forces. A test methodology that allows carrying out the experimental tests in a systematic and controlled way with the dynamometer plate has also been developed. From this model it will be possible to estimate the forces that tyres are capable of transmitting in different situations to act in the parameters which affect these forces and maximize them.     

Neural-empirical tyre model based on recursive lazy learning under combined longitudinal and lateral slip conditions

The behaviour of the tyre plays an important role in the vehicle handling. An accurate tyre model that estimates these forces and moments it is highly essential for the studies of vehicle behaviour. For the last ten years neural networks have attracted a great deal of attention in vehicle dynamics and control. Neural networks have been effectively applied to model complex systems due to their good learning capability. In this paper a recursive lazy learning method based on neural networks is considered to model the tyre characteristics under combined braking and cornering. The proposed method is validated by comparison with experimental obtained responses. Results show the estimated model correlates very well with the data obtained experimentally. Moreover, the neural model proposed allows to include the asymetric tyre behaviour in the tyre model without difficulty.     

The funding of hierarchical railway development in China

Transport networks are hierarchal in essence. In this paper, we explore the relationship between the financing structure and the hierarchal evolution of railway network development, using the case of China. Although privatization and corporatization in transport provision have been trends in some parts of the world, the national government is still the main body responsible for railway development in many countries. Among these countries, China and India are the only two that include the Ministry of Railways (MOR). In India, the entire country's railways are clearly defined as public services provided and managed by the MOR. In China, railways have been corporatized; yet, the MOR and the National Railway Corporation are still widely regarded as a single body that has monopolistic power over almost all railway systems at the national and regional levels in both infrastructure development and operation.     

Torsional stiffness and weight optimization of a real bus structure

In this paper, the structural optimization of a real bus structure is proposed. The proposed optimization has been accomplished by means of genetic algorithms. The structural behavior of the bus structure when subjected to weight and torsion was also analyzed using the finite element method (FEM). The results demonstrate that improved weight and torsional stiffness are achieved with the optimized structure.