排序方式: 共有11条查询结果,搜索用时 15 毫秒
1.
Kuniaki Shoji Rajesh Ramachandran Yuzo Kurobe Yasuhisa Hashizume 《Journal of Marine Science and Technology》2002,7(2):86-90
As a result of frequent marine disasters leading to the loss of human life and pollution of vast areas of the ocean, ship
manoeuvrability has become a very important characteristic of ship design. Among several recent experimental techniques to
determine ship manoeuvrability, the most popular is captive model testing using a planar motion mechanism (PMM). This article
describes some tests, analyses, and results of PMM tests in a circulating water channel (CWC) using a model of a training
ship. The hydrodynamic forces and moments acting on a model of the training ship Shioji Maru in pure yawing motion were measured, and hydrodynamic derivatives were obtained using two different methods of analysis:
singular value decomposition (a least-squares fit method) and Fourier analysis. Derivatives obtained from the tests were used
to simulate the turning trajectory of the actual ship, and these were compared with the results of sea trials. The results
indicate that both methods of analysis yield fairly similar derivatives. The simulation results were also found to be a close
match with the trial results.
Received: February 7, 2002 / Accepted: May 14, 2002
Address correspondence to: K. Shoji (shoji@ipc.tosho-u.ac.jp) 相似文献
2.
膨胀石墨吸油特性的研究 总被引:4,自引:1,他引:4
通过对不同形态和填充密度的膨胀石墨(EG)进行的毛细吸附实验,着重研究了EG的比表面积和填充密度对吸油特性的影响.实验结果表明:细颗粒状EG样品的比表面积从O.624m^2/g到34.20m^2/g显著变化时,对柴油吸附率的改善并不显著;与细颗粒状EG样品相比,大颗粒蠕虫状样品具有更高的吸附率;填充密度的变化对A级重油吸附率有显著影响. 相似文献
3.
Shoji Taniguchi 《上海交通大学学报(英文版)》2012,17(3):364-369
Terrible scenario for the future aspect of our society was issued by “The Limits to Growth”. Basic problems that we confront are the restricted natural resources and the environment. Regarding the resources, the overall average of the reserve/production ratio is predicted to fall below 10 years by 2040. Aggressive developments of mines based on the sense of urgency for metal resources cause strong confliction with the environment and the people living there. Resultantly, urban mine becomes more realistic than before. From the view point of ecological foot print, 5.3 globes are needed if all the people living in the world attain the affluent life same as USA. On the other hand, it is clear that we can get larger utility by smaller goods if our scale of satisfaction is reduced. We have to notice that happiness is our ultimate purpose, economy and industry are intermediate, and natural resources support the all from the basis. 相似文献
4.
Shoji Takechi Kazuhiro Aoyama Toshiharu Nomoto 《Journal of Marine Science and Technology》1998,3(4):194-200
Accuracy management concerns various aspects of all assembly industries, e.g., final product quality, manufacturing efficiency,
and manufacturing costs. In the near future, accuracy management will be even more important in manufacturing systems because
of mechanization and automation. This paper considers the concept of computer-aided accuracy management systems, which are
based on the concept of integrated manufacturing systems. We propose two management systems, accuracy planning and accuracy
estimation, and concentrate on accuracy planning. A model of welding deformations and an easy estimation method for such deformations
by computer analysis using the finite element method (FEM) are described. A prototype system based on the accuracy management
concept was implemented in the authors' integrated manufacturing systems, and some examples of estimating welding deformations
are given here.
Translation of an article that appeared in the Journal of The Society of Naval Architects of Japan, vol. 181 (1997): The original
article won the SNAJ prize, which is awarded annually to the best papers selected from the SNAJ Journal, JMST, or other quality
journals in the field of naval architecture and ocean engineering. 相似文献
5.
Shoji Takechi Kazuhiro Aoyama Toshiharu Nomoto 《Journal of Marine Science and Technology》2002,6(3):158-167
In ship hull production, the accuracy of management activities is extremely important. The block positioning operation in
the erection stage is a key process in such management. The quality of the block positioning determines not only the accuracy
of the final hull, but also the productivity and cost at the erection stage. We have previously proposed the basic concepts
of computer-aided accuracy management. Accuracy management activities consist of "accuracy planning activities" and "accuracy
measurement activities." Accuracy measurement activities involve checking and coping with inaccuracy. We have also proposed
a system of accuracy measurement metrics: one is accuracy for completion (e.g., straightness, flatness), and the other is
accuracy for construction (e.g., the relative joint shapes of each part). This paper explains the detailed accuracy metrics
for a block positioning operation in the erection stage. The quality of the block positioning operation is estimated by this
system: the accuracy of the completed hull can be evaluated by the concept of tolerance, and the accuracy of the construction
process can be evaluated by the concept of labor costs. The prototype of this accuracy metrics system is then implemented.
This metrics system is combined with the optimization software program iSIGHT to decide the best block positioning process.
Then some examples of the block position optimizing process are shown.
Received: November 2, 2001 / Accepted: December 6, 2001 相似文献
6.
The publicly-owned municipal bus sector that provides local transport in Japan is in a difficult situation because of operating deficits, inefficient operations and management, and budgetary constraints of expanding subsidies, and thus, it needs to be restructured to improve efficiency. This paper investigates the impact of subsidies and contractual settings on the cost structure of the publicly-owned bus sector in Japan. A trans-log cost function has been estimated by pooling cross-sectional data of 527 observations over the time period of 1990-2006 for a cross-section of 31 publicly-owned transport companies in Japan. Our analytical results confirm that governmental subsidies to this sector negatively affect the cost structure, while the contractual model may have a positive impact. We also discuss the implications of these results for Japan’s public transport policy. 相似文献
7.
车向明 《西安交通大学学报(英文版)》2001,13(1):59-63
Ki-67 antigen['J, which can be detected usingthe MIBl antibody['J, is a cell proliferation associ-ated nuclear antigen present in all stages of the cellcycle except G,, and thus the proliferation indexdetermined by MIB--1 reflects the cell proliferation.Recently, proliferative activity as evaluated usingthe MIB -l proliferation index (MIB-1 PI) hasbeen shown to be a prognostic factor in several tu-mors[3J. Tumors with low angiogenic activity havea reduced risk of recurrence and metastas… 相似文献
8.
Y. Tsutsumi A. Iijima K. Yoshida H. Shoji J. T. Lee 《International Journal of Automotive Technology》2009,10(6):645-652
The Homogeneous Charge Compression Ignition (HCCI) engine has attracted much interest because it can simultaneously achieve
high efficiency and low emissions. However, the ignition timing is difficult to control because this engine has no physical
ignition mechanism. In addition, combustion proceeds very rapidly because the premixed mixture ignites simultaneously at multiple
locations in the cylinder, making it difficult to increase the operating load. In this study, an HCCI engine was operated
using blended test fuels comprised of dimethyl ether (DME) and methane, each of which have different ignition characteristics.
The effects of mixing ratios and absolute quantities of the two types of fuel on the ignition timing and rapidity of combustion
were investigated. Cool flame reaction behavior, which significantly influences the ignition, was also analyzed in detail
on the basis of in-cylinder spectroscopic measurements. The experimental results revealed that within the range of the experimental
conditions used in this study, the quantity of DME supplied substantially influenced the ignition timing, whereas there was
little observed effect from the quantity of methane supplied. Spectroscopic measurements of the behavior of a substance corresponding
to HCHO also indicated that the quantity of DME supplied significantly influenced the cool flame behavior. However, the rapidity
of combustion could not be controlled even by varying the mixing ratios of DME and methane. It was made clear that changes
in the ignition timing substantially influence the rapidity of combustion. 相似文献
9.
The maneuvering models of motorcycles in previous studies often considered motorcycles' traveling in terms of movements in a physical static lane and not in terms of dynamic virtual lane‐based movements. For that reason, these models are not able to imitate motorcyclists' behavior well. This paper proposes a maneuverability model framework for motorcycles in queues at signalized intersections with considering the dynamic motorcycle's lane. The model includes (i) a dynamic motorcycle's lane to identify the current, left, and right lanes of the subject motorcycle, (ii) a threshold distance to determine when a motorcyclist starts to consider maneuvering, (iii) a lane selection model to identify the lane preferred by a motorcyclist, and (iv) a gap acceptance model to describe whether or not the lead and lag gaps are acceptable for maneuvering. The model framework captures the variation across the motorcyclist population and over time observations. The models were applied to Hanoi and Hochiminh city, Vietnam, based on microscopic data collected from video images. All of the parameters were estimated using the maximum likelihood method with the statistical estimation software GAUSS. The results show that 77.88% of the observed maneuvers – either staying in the current lane or turning left or right – could be modeled correctly by the proposed models. Copyright © 2010 John Wiley & Sons, Ltd. 相似文献
10.
随着经济的快速成长,交通运输也随之蓬勃发展,其中交通运输时间的缩短及运输燃料的节省更为重要,又因工程技术及材料的提升,因而促使隧道工程成为工程规划及设计上的首选,其虽可能导致工程经费的增加,但却大幅缩短运输时间及能源损耗,并增加行车舒适性,对于社会效益之提升具有相当大之帮助。隧道的利用首在确保其畅通性,除隧道内部的结构设计需抵抗地层应力,以维护隧道安全及空间利用外,山岳隧道洞口上方之边坡防护尤为重要,盖因洞口的防护除攸关隧道两端的通畅性外,另与隧道灾变后之救灾与人员逃生有绝对相关。一般隧道洞口的设计及施工均无可避免地对隧道洞口上方边坡稳定性及地表植被产生造成一定程度的影响,若采用喷浆或混凝土框梁等护坡方式时,对生态及环境将产生永久性的影响。预应防护网工法为可取代上述传统混凝土工法且无其缺点的一种新型护坡工法,将可使隧道洞口的设计及施工更加弹性及符合环境保护目的,本文旨在介绍该设计及施工更具弹性、非混凝土结构护坡方式且无需砍伐树木的护坡新工法,以供工程界于设计及施工时之参考。 相似文献