排序方式: 共有5条查询结果,搜索用时 15 毫秒
1
1.
2.
操纵性相关性分析一直以来是受到国内外学者的关注,但是由于其复杂性,至今未能很好地解决.目前,模型试验的数据往往是直接预报到实船的操纵性能,这有可能导致很大的偏差,影响船舶的航行安全.本文针对育鲲轮,进行了实船试验与模型试验的相关性分析.首先进行了实船回转试验和z形试验,测试了该船的操纵性.通过试验数据分析获得了纵距、横距、战术直径、回转直径、超越角等操纵性特征参数,试验过程中也进行了船舶姿态,如纵、横摇以及主机功率的测试.通过实船回转试验发现,主机功率比直航时增大了大约15%,这给船舶设计提供了参考.然后,采用6m长左右的模型也进行了相同试验的测试,电机转速与实船主机转速相似,且一直保持不变.最后,分析比较了模型所测数据与实船数据,发现特征参数误差基本都在10%以内.说明模型长度、螺旋桨的模拟等模型试验方案基本可行. 相似文献
3.
This paper focuses on the research on double-electrode gas metal arc welding(DE-GMAW) of AZ31 B magnesium alloy sheet with 2 mm thickness. During the welding process, stable hybrid arc of metal inert gas(MIG) and tungsten inert gas(TIG) is employed as welding heat source. Optical and electron microscopes are used to observe the microstructures of the weld joint. X-ray diffraction(XRD) and energy dispersive spectroscopy(EDS) are employed to identify the components in fusion zone. Microhardness is also tested. When the MIG current is 80 A, the perfect weld joint is obtained, though figures of fish scales are observed in all joints in the research. The fusion zone is formed by dendrites, where β-Mg17(Al, Zn)12is dispersed. The hardness in fusion zone and heat affected zone(HAZ) is lower than that in base metal(BM). The average Vickers hardness of fusion zone and HAZ is about 58 and 56 respectively, while the Vickers hardness of BM is about 63. 相似文献
4.
采用自制的横摇试验设备和控制系统,进行油船船模在三种横摇幅值下的强迫横摇试验,横摇试验周期为0.8~20 s,全方位探究零航速不同横摇周期时强迫横摇力矩以及力矩和运动之间相位的变化规律。试验发现,随横摇周期的增大,横摇力矩先减小,试验周期到达横摇固有周期附近时横摇力矩最小,之后横摇力矩逐渐增大,当横摇周期很长,船舶横摇缓慢,此时横摇力矩基本保持不变;同一横摇周期和不同横摇幅值下,横摇力矩与横摇幅值成倍数关系。随着横摇周期的减小,附加惯量成线性增加,横摇阻尼非线性明显,并随横摇幅值的增加而增大。 相似文献
5.
1