排序方式: 共有16条查询结果,搜索用时 15 毫秒
1.
Claudio Mazzoleni Hans Moosmüller Hampden D. Kuhns Robert E. Keislar Peter W. Barber Djordje Nikolic Nicholas J. Nussbaum John G. Watson 《Transportation Research Part D: Transport and Environment》2004,9(6):477-496
Carbon monoxide (CO), hydrocarbon (HC), and nitrogen oxide (NO) emission factors (EFs) are measured with a commercial vehicle emissions remote sensing system (VERSS) during a large-scale vehicle exhaust emissions study in Las Vegas. Particulate matter (PM) EFs are simultaneously measured for individual vehicles with a newly developed PM-VERSS based on ultraviolet backscatter light detection and ranging (Lidar). The effectiveness of CO and HC EFs as proxy for NO and PM EFs for spark-ignition vehicles is evaluated. Poor correlations were found between EFs for pollutants on an individual vehicle basis indicating that high EFs for one or more pollutants cannot be used as a predictor of high EFs for other pollutants. Stronger functional relationships became evident after averaging the EF data in bins based on rank-order of a single pollutant EF. Low overlap between the highest 10% emitters for CO, HC, NO, and PM was found. These results imply that for an effective reduction of the four pollutants, inspection and maintenance (I/M) programs, including clean screening, should measure all four pollutants individually. Fleet average CO and HC concentrations determined by gaseous VERSS were compared with fleet average CO and HC concentrations measured at low-idle and at high-idle during local I/M tests for spark-ignition vehicles. The fleet average CO concentrations measured by I/M tests at either idle were about half of those measured by remote sensing. The fleet average high-idle HC concentration measured by I/M tests was about half of that measured by VERSS while low-idle I/M and VERSS HC average concentrations were in better agreement. For a typical vehicle trip, most of the fuel is burned during non-idle conditions. I/M measurements collected during idling conditions may not be a good indicator of a vehicle’s potential to be a high emitter. VERSS measurements, when the vehicle is under a load, should more effectively identify high emitting vehicles that have a large contribution to the mobile emissions inventory. 相似文献
2.
Motorways, which were devised at the beginning of their history as dedicated roads intended to be traveled by cars only, are at present also traveled by considerable flows of trucks. This fact has deeply changed the motorway transport system with respect to its original conception, owing to the interactions between two categories of vehicles whose characteristics are very different. These interactions greatly increase the transport cost perceived by car drivers with respect to truck drivers. This paper studies the consequences of this cost asymmetry on the evolution of the transport system when the geometric characteristics of a motorway remain unchanged in time, while transport demand increases. By using a theoretical model of competition between cars and trucks, it is shown that, if both the geometric characteristics of a motorway and the increase rate of the activities that feed the transport demand remain unchanged over time, the competition between cars and trucks, as well as the fact that in general passengers have better transport alternatives than freight, make the increase rate of truck traffic greater than that of cars, causing a progressive increase in the proportion of trucks in the time periods in which a motorway is traveled by both the vehicle categories. Since truck traffic on motorways, at least in Europe, is very scarce on weekends and in holiday periods, in which motorways are traveled almost only by cars, these results seem to indicate a tendency to the specialization of motorways, which are likely to be used in the future mostly by only one category of vehicles in different periods of time. 相似文献
3.
Emilio Ferrari Riccardo Manzini Arrigo Pareschi Alessandro Persona Alberto Regattieri 《先进运输杂志》2003,37(3):243-272
The present research deals with car pooling as a means of making better use of existing infrastructure and as a means of reducing traffic congestion with all its associated induced effects. Car pooling schemes involve several drivers getting together to share a private vehicle simultaneously, in order to reach their destinations points according to a semi‐common route rather than each driver using their own vehicle. The Car Pooling Problem belongs to the non‐polynomial computational complexity family of operations problems. In the current literature there are only a few studies on this optimization problem: the research group has designed several different new automatic and heuristic data processing routines to support efficient matching in car pool schemes. These are based on savings functions and belong to two distinct macro classes of algorithms to give two different modelings of this problem. They offer average savings of more than 50% in traveled distances demonstrating the effectiveness of a trivial matching scheme for real applications. 相似文献
4.
Michele Acciaro Christa Sys Claudio Ferrari Athena Roumboutsos Genevieve Giuliano 《Maritime Policy and Management》2014,41(5):480-500
Environmental sustainability in the port industry is of growing concern for port authorities, policy makers, port users and local communities. Innovation can provide a solution to the main environmental issues, but often meets resistance. While certain types of technological or organisational innovation can be satisfactorily analysed using closed system theories, in the case of seaports and in particular in the area of environmental sustainability, more advanced conceptual frameworks have to be considered. These frameworks need to be able to account for the multiple stakeholder nature of the port industry and of the network and vertical interactions that environmental sustainability calls for. This article investigates successful innovations improving environmental sustainability of seaports. The proposed framework builds in part on research concepts developed in the InnoSuTra EU FP7 project. From a methodological perspective, this article develops a method for quantifying the degree of success of innovation with respect to a set of specific objectives. Several case studies are used to test the framework against real innovation examples, such as onshore power supply, or alternative fuels. In this article, we argue that only those innovations that fit dynamically port actors’ demands and the port institutional environment stand a chance to succeed. 相似文献
5.
Abstract the prospect of global warming and consequent sea level rise will have important implications for coastal communities. this article examines the land use implications of alternate sea level rise scenarios on the city of myrtle beach, south carolina. current trends as well as high and low sea level rise scenarios are superimposed on the city's beach profile and near shore contours to estimate the type and value of land development likely to be impacted. It is found that losses associated with accelerated sea level rise would be particularly high in the city's hotel district and that overall property loss could range from 21 to 60% of the city's total property value. to lessen these potential losses, coastal communities such as myrtle beach must choose among one of three policy options including: (1) barricade the beach, (2) raise the land, and (3) implement a strategic retreat. specific alternatives within each of these options are explored in turn. the article concludes that successful development plans will incorporate ground rules sensitive to and consistent with dynamic coastal processes. 相似文献
6.
Claudio Benini Marco Gadola Daniel Chindamo Stefano Uberti Felipe P. Marchesin Roberto S. Barbosa 《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》2017,55(3):338-350
This work analyses the effect of friction in suspension components on a race car vertical dynamics. It is a matter of fact that race cars aim at maximising their performance, focusing the attention mostly on aerodynamics and suspension tuning: suspension vertical and rolling stiffness and damping are parameters to be taken into account for an optimal setup. Furthermore, friction in suspension components must not be ignored. After a test session carried out with a F4 on a Four Poster rig, friction was detected on the front suspension. The real data gathered allow the validation of an analytical model with friction, confirming that its influence is relevant for low frequency values closed to the car pitch natural frequency. Finally, some setup proposals are presented to describe what should be done on actual race cars in order to correct vehicle behaviour when friction occurs. 相似文献
7.
This paper deals with the measurement of the network complexity of some selected shipping groups, also identifying the contribution of co-operative agreements among carriers. The empirical investigation is focused on: (i) the analysis of the distribution of the carrying capacity per range; and (ii) the comparison of that capacity with the throughput handled in the port facilities of the group. These variables are interpreted in the light of the impact that alliances have on the geographical wideness of the services supplied by each partner. This factor also allows to depict how the cultural and political origin of shipping lines affects the decision of joining an alliance and the outcomes deriving from such co-operation. 相似文献
8.
Claudio O. Delang Wai-Tung Cheng 《Transportation Research Part D: Transport and Environment》2012,17(6):492-494
The paper presents the results of a survey carried out in Hong Kong to gauge people’s attitudes towards the environmental aspects of electric cars. The survey shows that people in general recognise the positive environmental benefits of electric cars, but express concerns over their environmental costs, in particular those of battery waste and increased airborne pollutants emitted by power plants when the electricity is produced. 相似文献
9.
Alessandro Ferrari Antonio Mittica Pietro Pizzo Zhiru Jin 《International Journal of Automotive Technology》2018,19(5):771-781
The proportional-integrative-derivative (PID) controller and the pressure control valve of a Common Rail system are modelled by taking into account electronic, electrical, hydraulic and mechanical aspects. A fully predictive model of the injection apparatus is realized and validated by means of comparison with experimental data. The effects of the PID parameters on the injection system dynamics are illustrated and discussed on the basis of model results, which refer to steadystate and transient working conditions. The influence of the accumulator size on the rail pressure time history is investigated when the rail volume is dramatically reduced (up to 2.5 cm3). In particular, the effect of the large rail pressure drop that occurs at the end of the main injection for Minirail layout solutions is examined when after injections are implemented. An objective is to try to determine possible suitable values of the PID controller parameters and of the pressure-sensor sampling-frequency for rails of reduced size. 相似文献
10.
Giulia Arduino Raimonds Aronietis Yves Crozet Koos Frouws Claudio Ferrari Laurent Guihéry Seraphim Kapros Ioanna Kourounioti Florent Laroche Maria Lambrou Michael Lloyd Amalia Polydoropoulou Athena Roumboutsos Eddy Van de Voorde Thierry Vanelslander 《Research in Transportation Economics》2013
The main objective of this paper is ‘to assess the conditions, including policy support, under which innovative concepts have a high chance of getting adopted and being successful’. The work will start from the state-of-the-art with the following goals targeted. Firstly, to identify the paths that new innovative concepts usually follow, what key determinants are, which actors are involved, and what policy has been doing and can do. As part of this, a typology of variables is established, which will be the basis for the identification of successful adoption paths. Illustrations are provided of the performance of different innovative concepts in the seaport sector. A further goal is to propose policy recommendations, identify best practices, barriers to implementation and transferability of innovative concepts and processes. Finally, the research establishes developments needed in assessment methods and a methodological framework if innovative concepts are introduced. 相似文献