Off-set crack propagation analysis under mixed mode loadings

An assessment was carried out herein to study the eccentricity of cracks subjected to mixed-mode loadings. Several loading locations relative to a central line were selected to induce mixed-mode loadings, which were computed using a finite element method. An adaptive meshing technique was adopted during the simulation of crack propagation to ensure the singularity of stress at the tip of the crack. The stress intensity failure criterion was used and programmed, and the node splitting technique was used when the stress intensity factor reached the fracture toughness of the material to simulate crack propagations. It was found that large variations in the stress intensity factor were observed when off-set cracks were used, and that K _II decreased when loading distance increased, but increased when the off-set crack distance was increased. Both crack eccentricity and loading distance played important roles in producing mixed-mode loading, compared to the influence of central cracks. Correction factors were introduced to modify the calculation of stress intensity factors under mixed-mode loadings. Simulations of crack propagation were also conducted to study the effects of crack eccentricities and loading distances. It was found that the crack length, the loading distance relative to the central crack and the crack eccentricity dominated calculations of the integrity of cracked structures.     

Fatigue features extraction of road load time data using the S-transform

This paper presents the algorithm development of a new fatigue data editing technique using S-T approach. In general, the S-transform (S-T) is a time-frequency spectral localization method which performs a multi-resolution analysis on signal. This method represents a better time-frequency resolution especially for non-stationary signal analysis. This technique was developed to produce shortened fatigue data for fatigue durability testing. The S-T method was applied to detect the damaging events contained in the fatigue signals due to high S-T spectrum location. The damaging events were extracted from an original fatigue signal to produce the shortened edited signal which has equivalent fatigue damage. Three types of road load fatigue data were used for simulation purpose, pave track, highway and country road. In this study, an algorithm was developed, to detect the damaging events in the original fatigue signal. The algorithm can be used to extract the fatigue damaging events and these events were combined in order to produce a new edited signal which neglect the low amplitude cycles. The edited signal consists of the majority of the original fatigue damage in the shortened signal with 15–25% time reduction. Thus, it has been suggested that this shortened signal can then be used in the laboratory fatigue testing for the purpose of accelerated fatigue testing.     

Emission analysis of a compressed natural gas directinjection engine with a homogenous mixture

In an era in which environmental pollution and depletion of world oil reserves are of major concern, emissions produced by automotive vehicles need to be controlled and reduced. An ideal solution is to switch to a cleaner fuel such as natural gas, which generates cleaner emissions. In addition, control over the in-cylinder air-fuel mixture can be best achieved through a direct-injection mechanism, which can further improve combustion efficiency. This need for cleaner automobiles provides the motivation for this paper’s examination of the use of computational fluid dynamic (CFD) simulations to analyze the concentrations of the exhaust gases produced by a compressed natural gas engine with a direct-fuel-injection system. In this work, a compressed natural gas direct-injection engine has been designed and developed through a numerical simulation using computational fluid dynamics (CFD) to provide an insight into complex in-cylinder behavior. The emissions analyzed in this study were carbon monoxide (CO), nitric oxide (NO) and carbon dioxide (CO₂), i.e. the main pollutants produced by natural gas combustion. Based on a stoichiometric mixture, the concentrations of CO and NO were computed using the dissociation of carbon dioxide and the extended Zeldovich mechanism. CO₂ was calculated using a mass balance of the species involved in the combustion process. The simulation results were then compared with the experimental data generated by a single-cylinder research engine test rig. A good agreement was obtained with the experimental data for the engine speeds considered for all emissions concentrations.     

Effectiveness of vehicle weight enforcement in a developing country using weigh-in-motion sorting system considering vehicle by-pass and enforcement capability

Vehicle overloading has been identified as one of the major contributors to road pavement damage in Malaysia. In this study, the weigh-in-motion (WIM) system has been used to function as a vehicle weight sorting tool to complement the exsiting static weigh bridge enforcement station. Data collected from the developed system is used to explore the effectiveness of using WIM system in terms of generating more accurate data for enforcement purposes and at the same time improving safety and reducing the number of vehicle weight violations on the roads. This study specifically focus on the effect of vehicle by-pass and static weigh station enforcement capability on the overall effectiveness of vehicle weight enforcement system in a developing country. Results from this study suggest that the WIM system will significantly enhance the effectiveness and efficiency of the current vehicle weight enforcement, thus generating substantial revenue that would greatly off-set the current road maintenance budget that comes from tax payers money. If there is substantial reduction in overloaded vehicles, the public will still gain through reduction in road maintenance budget, less accident risks involving heavy trucks, and lesser greenhouse gases (GHGs) emissions.