Distribution of suspended sediment in the coastal sea off the Ganges–Brahmaputra River mouth: observation from TM data

Remote sensing technique was applied to estimate suspended sediment concentration (SSC) and to understand transportation, distribution and deposition of suspended sediment in the estuary and throughout the coastal sea, off the Ganges–Brahmaputra River mouth. During low river discharge period, zone of turbidity maximum is inferred in the estuary near the shore. SSC map shows that maximum SSC reaches 1050 mg/l in this period. Magnitude of SSC is mainly owing to resuspension of the bottom surface sediments induced by tidal currents flowing over shallow water depths. The influence of depth on resuspension is farther revealed from the distribution and magnitude of SSC along the head of Swatch of No Ground (SNG) submarine canyon. During high river discharge period, huge river outflow pushed the salt wedge and flashes away the suspended sediments in the coastal sea off the river mouth. Zone of turbidity maximum is inferred in the coastal water approximately within 5–10 m depth of water, where the maximum SSC reaches 1700 mg/l. In this period, huge fluvial input of the suspended sediments including the resuspended bottom sediments and the particles remaining in suspension for longer period of time since their initial entry control mainly the magnitude of SSC. In the estuary near the shore, seasonal variation in the magnitude of SSC is not evident. In the coastal sea (>5 m water depth), seasonal influence in the magnitude of SSC could be concluded from the discrepancy between SSC values of two different seasons. Transportation and deposition of suspended sediments also experiences seasonal variations. At present, suspended sediments are being accumulated on the shallow shelf (between 5 and 10 m water depth) in low discharge period and on the mid-shelf (between 10 and 75 m water depth) during high discharge period. An empirical (exponential) relationship was found between gradual settle down of suspended sediments in the coastal sea and its lateral distance from the turbidity maximum.     

Variational principles in water-wave problems (wave radiation conditions and their variational treatment)

To discuss water-wave problems in unlimited waters, it is important to know what type of wave radiation condition should be placed on a virtual surface corresponding to infinity. For this kind of problem, the Sommerfeld radiation condition is well known. In this article, the condition is extended to treat a case with an incident wave. Furthermore, a more general wave radiation condition is introduced from a different point of view. The above-mentioned wave radiation conditions are introduced into the variational principles of the Kelvin, Hellinnger–Reissner, and Dirichlet type. The Dirichlet-type variational principles are then used in numerical calculations for bending waves in a bar, and the effectiveness of the wave radiation conditions and the variational principles is shown. The numerical results for one-dimensional water-wave problems are then given. As expected, the region required for the numerical solution is reduced drastically compared with that required by the Sommerfeld-type formulation. Furthermore, the amplitude of the diverging wave is obtained in the process of reaching the variational solution. Finally, two-dimensional water-wave problems are briefly discussed. Received: August 9, 2001 / Accepted: September 17, 2001     

Numerical study on active wave devouring propulsion

The possibility of extracting energy from gravity waves for marine propulsion was numerically studied by a two-dimensional oscillating hydrofoil in this study. The commercially available computational fluid dynamics software FLUENT was used for the unstructured grid based on the Reynolds-average Navier?CStokes equation. The free surface waves and motion of the flapping foil were implemented by customizing the FLUENT solver using a user-defined function technique. In addition, dynamic mesh technology and post processing capabilities were fully utilized. The validation of the model was carried out using experimental data for an oscillation hydrofoil under the waves. The results of the simulation were investigated in detail in order to explain the increase of propeller efficiency in gravity waves. Eight design parameters were identified and it was found that some of them greatly affected the performance of wave energy extraction by the active oscillating hydrofoil. Finally, the overall results suggested that when the design parameters are correctly maintained, the present approach can increase the performance of the oscillating hydrofoil by absorbing energy from sea waves.     

Reduction of skin friction by microbubbles and its relation with near-wall bubble concentration in a channel

Determination of the flow structure near the wall is essential for a clear insight into the phenomenon of skin friction reduction by microbubbles in a turbulent boundary layer. An important parameter, is the bubble concentration or void fraction in the wall region in drag-reducing conditions. The purpose of this paper is to show drag-reducing effects due to microbubbles in a water channel and, more importantly, to show the dependence of the drag-reduction values on the near-wall void fraction. A two-dimensional channel with an aspect ratio of 10 was specially built for this purpose with provisions for air injection through porous plates. Skin friction was directly measured by a miniature floating element transducer with a 5-mm circular sensing disk mounted flush on the top wall 67 channel-heights downstream of the injector. The wall friction in the presence of air bubbles was found to be reduced under the same bulk velocity when compared with the value without air. Detailed void fraction profiles across the channel were obtained by a sampling probe and a fiber-optic probe. Better collapse of the drag reduction data, independent of different profile shapes, was found when plotted against the near-wall void fraction than against a cross-sectional mean void fraction. While this dependence reconfirms that the phenomena are essentially inner-region dependent, the lack of influence of the bubble distribution patterns away from the wall implies lack of outer region influence.     

A study on improving the course-keeping ability of a pure car carrier in windy conditions

The course-keeping ability of a pure car carrier (PCC) in windy conditions is discussed in this article. Numerical simulations of two PCCs were carried out to compare their course-keeping abilities in wind. The two PCCs had the same hull form but different types of rudder. One PCC was fitted with a semispade rudder (hereinafter, the normal rudder), whereas the other was fitted with a spade-type Schilling rudder (hereinafter, the Schilling rudder). Both PCCs were designed to a new concept for the accommodation structure and hull form above the load water line. In this new design concept, there are no sharp corners in the superstructure so as to reduce wind resistance and improve steering performance. The limits of course keeping for the two PCCs were investigated through simulations. The course-keeping abilities of the two PCCs, each with two different types of autopilot system, were also investigated in wind. To develop the numerical simulation, the hydrodynamic coefficients of the two PCCs were predicted based on the data published for a third PCC having similar principal particulars. The numerical model of the two PCCs was validated by comparing its behavior with the respective full-scale trial results. Wind resistance coefficients were predicted by combining the results of wind tunnel experiments of the object PCCs and a regression model. Numerical simulations under steady wind conditions were also carried out and the results compared with some full-scale experiments to validate the mathematical model of the PCC.     

为新干线高速运行而开发的基础制动装置

介绍了为新干线开发的中心安装制动盘、均衡压力制动闸片和气动夹钳相结合的新型制动装置,经过试验台试验和实际FASTECH列车运行试验,证实这种新型制动装置达到了所要求的性能。对该新型制动装置进行了改进,以降低噪声。     

Experimental Study on Heat Transfer Enhancement of Natural Circulation Liquid Cooling System for Electronic Component

NomenclatureH :height of condenser above the evaporatorlevel( m)h:heightof FC- 72 filled in the testloop( m)q:heat flux based on projected surface area( W/cm2 )q CHF:critical heat flux( W/cm2 )Tc:cooling water temperature(°C)Ts:saturation temperature(°C)Tw:wall temperature(°C)ΔTsat:wall superheat( K)ΔTsub:liquid subcooling( K)W:flow rate of FC- 72 ( g/min)z:height of liquid in the downcomer( m)IntroductionDirect or indirect liquid cooling with phase-change by use of dielectric liq…     

单细胞凝胶电泳技术检测小鼠成纤维细胞DNA的氧化损伤及修复

目的观察小鼠成纤维细胞由过氧化氢(H2O2)引起的DNA损伤及其修复,并详细介绍单细胞凝胶电泳技术。方法培养NIH3T3细胞,H2O2造成细胞氧化损伤,单细胞凝胶电泳技术(SCGE,Comet Assay)检测细胞DNA的损伤情况。结果①建立了H2O2致NIH3T3细胞DNA损伤的分级图谱;②H2O2引起的小鼠成纤维细胞DNA单链断裂与H2O2的浓度呈依赖性关系;③细胞在除去H2O2后15 min已出现明显修复,多数修复可在1 h内完成,但少数修复可能需要较长时间才能完成。结论单细胞凝胶电泳技术是一种简便、敏感的检测DNA氧化损伤的方法。