Certification criteria in type I ecolabelling related to metals for sustainable materials management

A sustainable materials management for metals should be achieved to conserve resources of metal minerals. For the sustainable materials management, material flows through the whole life cycle of materials have been recognized by material flow analysis (MFA) studies. Former MFA studies pointed out that cyclic use of metals could be enhanced not only by increasing quantity of recovered scrap but also by upgrading quality of the scrap. In general, the quality is degraded by contaminants which commingle at disassembling processes. The mixture of contaminants depends on usage of materials in products. Here, Type I ecolabelling has a potential to convey messages for avoiding mixture of contaminants to the producers of finished products. In this study, on the basis of a survey on existing certification criteria related to metals in the world, a general concept of certification criteria on sustainable materials management for metals in Type I ecolabelling system is proposed. Finally, we propose six criteria in the form of certification criteria in Type I ecolabelling system.     

测量隧道、管道中的结构性运动：光纤测量应变

预测结构性地表沉降引起的地下结构运动是一件非常重要的任务，特别是牵涉到年久的基础设施时（例如砌筑隧道和管道）。我们对这方面的了解还很有限，例如，隧疏王引爱土体运动时，砖衬隧道将如何变化？现在英国剑桥大学工程部的研究人员提出了一种解决方案。     

PMM tests in a circulating water channel and nonlinear analysis

As a result of frequent marine disasters leading to the loss of human life and pollution of vast areas of the ocean, ship manoeuvrability has become a very important characteristic of ship design. Among several recent experimental techniques to determine ship manoeuvrability, the most popular is captive model testing using a planar motion mechanism (PMM). This article describes some tests, analyses, and results of PMM tests in a circulating water channel (CWC) using a model of a training ship. The hydrodynamic forces and moments acting on a model of the training ship Shioji Maru in pure yawing motion were measured, and hydrodynamic derivatives were obtained using two different methods of analysis: singular value decomposition (a least-squares fit method) and Fourier analysis. Derivatives obtained from the tests were used to simulate the turning trajectory of the actual ship, and these were compared with the results of sea trials. The results indicate that both methods of analysis yield fairly similar derivatives. The simulation results were also found to be a close match with the trial results. Received: February 7, 2002 / Accepted: May 14, 2002 Address correspondence to: K. Shoji (shoji@ipc.tosho-u.ac.jp)     

Applications of a new ecosystem model to study the dynamics of phytoplankton and nutrients in the Ariake Sea,west coast of Kyushu,Japan

In this study, we present the development and application of a new ecosystem model coupled with a hydrodynamic model to describe the important physical, chemical and biological processes of an ecosystem in the marine environment, the Ariake Sea in the west coast of Kyushu, Japan. The model was calibrated and validated using in-situ field measurements from various monitoring stations in the sea. The presented results covered the period from January 1991 to December 2000. The results showed that chlorophyll-a, nutrients and dissolved oxygen levels varied seasonally in response to weather and boundary condition. Through this study, the model was shown to be able to handle the flooding and drying processes that usually exist and play an essential role over the estuarine-tidal flats of the sea.     

膨胀石墨吸油特性的研究

通过对不同形态和填充密度的膨胀石墨(EG)进行的毛细吸附实验，着重研究了EG的比表面积和填充密度对吸油特性的影响．实验结果表明：细颗粒状EG样品的比表面积从O．624m^2／g到34．20m^2／g显著变化时，对柴油吸附率的改善并不显著；与细颗粒状EG样品相比，大颗粒蠕虫状样品具有更高的吸附率；填充密度的变化对A级重油吸附率有显著影响．     

Measurements of hydrodynamic forces, surface pressure, and wake for obliquely towed tanker model and uncertainty analysis for CFD validation

This article presents hydrodynamic forces and moments, surface pressures, estimated side force distributions, and wakes under oblique towing conditions for a practical tanker model (model KVLCC2M), which was designed by the Korea Research Institute of Ships and Ocean Engineering (KRISO). Ship offset data is readily available and can be obtained from the Internet. The model ship has no appendages and no rudder. Trim and sinkage were adjusted to zero in the static condition and the model ship was constrained against any motion. Although the drift angle β was primarily set to 0°, 6°, and 12°, other settings were used in some experiments. All experimental results were processed using uncertainty analysis. The uncertainty analyzing method follows the ANSI/ASME Performance Test Code (PTC19.1-1985) and the AIAA Standard S-071-1995. Only a few error components were considered here and they were empirically chosen because they had a heavy weighting when used in the uncertainty calculation. The results of these towing tank experiments will contribute to the development of computational fluid dynamics (CFD) research in ship hydrodynamics.     

Limits to resources, economic growth and happiness

Terrible scenario for the future aspect of our society was issued by “The Limits to Growth”. Basic problems that we confront are the restricted natural resources and the environment. Regarding the resources, the overall average of the reserve/production ratio is predicted to fall below 10 years by 2040. Aggressive developments of mines based on the sense of urgency for metal resources cause strong confliction with the environment and the people living there. Resultantly, urban mine becomes more realistic than before. From the view point of ecological foot print, 5.3 globes are needed if all the people living in the world attain the affluent life same as USA. On the other hand, it is clear that we can get larger utility by smaller goods if our scale of satisfaction is reduced. We have to notice that happiness is our ultimate purpose, economy and industry are intermediate, and natural resources support the all from the basis.     

Basic studies on accuracy management systems based on estimating welding deformations

Accuracy management concerns various aspects of all assembly industries, e.g., final product quality, manufacturing efficiency, and manufacturing costs. In the near future, accuracy management will be even more important in manufacturing systems because of mechanization and automation. This paper considers the concept of computer-aided accuracy management systems, which are based on the concept of integrated manufacturing systems. We propose two management systems, accuracy planning and accuracy estimation, and concentrate on accuracy planning. A model of welding deformations and an easy estimation method for such deformations by computer analysis using the finite element method (FEM) are described. A prototype system based on the accuracy management concept was implemented in the authors' integrated manufacturing systems, and some examples of estimating welding deformations are given here. Translation of an article that appeared in the Journal of The Society of Naval Architects of Japan, vol. 181 (1997): The original article won the SNAJ prize, which is awarded annually to the best papers selected from the SNAJ Journal, JMST, or other quality journals in the field of naval architecture and ocean engineering.     

濑户美浓窑对福建陶瓷的模仿和中日禅僧

12世纪以后的濑户美浓窑是对福建陶瓷的模仿,是福建陶瓷的日本化生产.濑户美浓窑的模仿生产,时间上正值东亚社会的国际局势发生动乱的时期,技术工艺上受福建陶工的直接指导,濑户美浓窑所模仿生产的产品,均为日本饮食文化和茶文化中所需要的器皿.为福建陶瓷工来到濑沪美浓提供方便的是福建和濑户美浓的禅僧以及福建和堺市的海商,而12世纪末期构建起来的福建与堺市的贸易体系基础--东海太平洋禅宗网络的存在使陶工的移动成为可能.