Mixed analysis of shell and solid elements using the overlaying mesh method

 This article presents a mixed method of analyzing shell elements and solid elements using the overlaying mesh method. In the structural design of a ship's hull, the shell elements are used for the global model. However, the solid elements are necessary to analyze the stress concentration zones or the vicinity of a crack. In such cases, the models are analyzed using zooming analysis, in which the results of a global model analysis are transferred to a local model analysis by imposing boundary conditions. This method is more advantageous than zooming analysis in terms of the accuracy of the solution and the modeling flexibility. Some examples of a plate model with a cracked surface or with a projection are shown in order to demonstrate the effectiveness of the method. Received: August 6, 2002 / Accepted: November 25, 2002 Address correspondence to: S. Nakasumi (sumi@nasl.t.u-tokyo.ac.jp) Updated from the Japanese original, which won the 2002 SNAJ prize (J Soc Nav Archit Jpn 2001;189:219–224; and 190:655–662)     

A cross-country study of fairness and infringement on freedom as determinants of car owners' acceptance of road pricing

Jakobsson et al. (2000) found that in Sweden public acceptance of road pricing decreases if it is perceived to be unfair and to infringe on freedom. The present study reports a survey investigating whether the same effects are found in the Asian countries of Japan and Taiwan. The results indicate that fairness plays the same role. However, income had a direct effect on acceptance in Taiwan but not in Japan or Sweden.     

Effects of economic disincentives on private car use

A field experiment was conducted to investigate the effects of economic disincentives on private car use. Eighty two-adult households who were owners of at least one car were randomly assigned to three experimental groups and one control group. Both experimental and control groups logged their car trips during one week before, one week during, and one week after treatment. The treatment consisted of charging two of the experimental groups approximately 100% of normal cost per kilometer of driving during 2 weeks, and charging the third experimental group this amount per kilometer of driving during 4 weeks. With the purpose of investigating whether deliberate planning increases the effect of economic disincentives, the households in one of the former and in the latter group were asked to fill out a prospective car log for the following week. The control group was not charged or requested to fill out a prospective car log but was in other respects treated in the same way. Analyses of the car logs and odometer readings during and at the end of treatment showed a weak reduction of car use due to the economic disincentives that however were almost completely dependent on planning.     

Hydroelasto-plasticity approach to predicting the post-ultimate strength behavior of a ship’s hull girder in waves

Dynamic collapse behavior of a ship’s hull girder in waves is investigated; post-ultimate strength behavior is the focus. Firstly, a simulation method is proposed. Assuming that a plastic hinge is formed during the collapse of the hull girder, the whole ship is modeled as two rigid bodies connected amidship via a nonlinear rotational spring. The post-ultimate strength behavior, such as the reduction of load carrying capacity due to buckling and yielding, is reflected in the model. Hydrodynamic loads are evaluated by using nonlinear strip theory to account for the effect of large plastic deformations on the loads. A scaled model for validation of the simulation is designed and fabricated. Then a series of tank tests is conducted using the scaled model to validate the simulation results. Post-ultimate strength behavior characteristics in waves are clarified by using the numerical and tank test results. It is shown that the hull girder collapses rapidly after reaching ultimate strength, and then the plastic deformation grows until unloading starts at the collapsed section. Finally, several parametric dependencies of the extent of the collapse behavior are discussed based on a series of the simulations.     

Structural safety assessment of a pontoon-type VLFS considering damage to the breakwater

 A structural safety assessment of a pontoon-type very large floating structure (VLFS) surrounded by a gravity-type breakwater was carried out for extreme wave conditions by considering the damage to the breakwater. Bending and shear collapses are considered to be a failure mode of the floating structure, while overturning damages the breakwater. The probability of the breakwater overturning, and the transmitted wave height before and after damage to the breakwater, are evaluated using design formulae for port and harbor facilities in Japan. The ultimate bending and shear strengths of the floating structure are calculated by the idealized structural unit method (ISUM) and FEM, respectively. The calculated failure probability for the floating structure is compared with the specified target safety level. It was found that the floating structure under consideration is most likely to fail by bending in transverse waves, and that the corresponding failure probability satisfies the target level. Received: September 12, 2002 / Accepted: October 4, 2002 Acknowledgment. The authors are grateful to Dr. Shigeo Ohmatsu, National Maritime Research Institute, Japan, for allowing us to use the program of hydroelastic response analysis. Address correspondence to: M. Fujikubo (e-mail: fujikubo@naoe.hiroshima-u.ac.jp) Updated from the Japanese original, which won the 2002 SNAJ prize (J Soc Arthit Jpn 2002;190:337–345)     

Experimental study on elastic behaviors of two tandem risers in constant flow

Journal of Marine Science and Technology - Multiple pipes bundled with a certain distance are used for deep ocean development for such as lifting seafloor massive sulfides (SMS), pumping up a large...     

THE CYTOTOXIC EFFECTS OF CRUDE BILE ON HUMAN PANCREATIC CANCER CELL LINES

Thebileacidswereconfirmedasnonspecificcytotoxicsubstanceswhichplayveryimportantro1einpathophysiologyofextrahepaticcholesta-sis[la.Invitrostudieshadprovedthatthebileacidscouldcausechronicandacuteinjuryofpancreaticductalepitheliumactingasaninitiatorofpancre-atitist2i.Thepancreaticcancerisamajorworld-widepublichealthproblernandremainsasignifi-cantclinica1challenge.Atthetimeofdiagnosis,about7o%ofpancreaticcancerpatientsmanifestobstructivejaundicewhichcanresultinprogressiveliverdysfunctionandculmin…     

The influence of personality on acceptability of sustainable transport policies

Previous research has shown that fairness, infringement on freedom, and perceived effectiveness are determinants of transport pricing acceptability. In the present study we investigate determinants of acceptability of environmental (carbon) taxation for which trust in government and environmental concern are additional determinants. Carbon taxation is an extension of fuel taxes and may thus be viewed as transport pricing. Our main focus is on the role played by personality traits. Structural equation modeling reveals that acceptability is related to the personality traits extraversion, agreeableness, and conscientiousness. Extraverted individuals have higher levels of trust in government which leads to higher acceptability. Also correlations between agreeableness and conscientiousness as well as environmental problem awareness and personal norm are observed. We discuss strategies for effective marketing of transportation policies considering how acceptability is related to personality traits.     

E955型新干线高速试验列车(FASTECH360Z)概述

介绍了E955型高速试验列车的开发难点及其应对措施,概述了其基本结构和技术特点。     

An experimental analysis of intelligibility and efficiency of in-vehicle route guidance system displays

This study focuses on the user-interface of the route guidance system with an electronic map display. The ultimate goal of the study is to aid in designing electronic map displays that can deliver information to the user most efficiently and expeditiously with minimum confusion. To evaluate the efficiency and understandability of a map display, laboratory experiments were designed and conducted in this study. In the experiments the subjects were presented with electronic map displays of different attributes and performed a set of tasks. Their understanding of the information contents was measured based on the outcomes of the tasks, and subjective ratings of the ease of using the maps were obtained. Using the experimental data obtained, a structural equations model system is developed to explain the understandability of a map display in terms of the subject’s attributes and the characteristics of the map display. The experimental procedure and the modeling results are presented in this paper.