Driver steering and muscle activity during a lane-change manoeuvre

The article reports an experimental study of driver steering control behaviour in a lane-change manoeuvre. Eight test subjects were instrumented with electromyography to measure muscle activation and co-contraction. Each subject completed 30 lane-change manoeuvres with one vehicle on a fixed-base driving simulator. For each driver, the steering torque feedback characteristic was changed after every ten manoeuvres; the response of the vehicle to steering angle inputs was not changed. Drivers' control strategies were found to be robust to changes in steering torque feedback. Path-following errors, muscle activity and muscle co-contraction all reduce with the number of lane-changes performed by the driver, suggesting the existence of a learning process. Comparing the test subjects, there was some evidence that high levels of co-contraction were used to allow high-frequency steering inputs to be generated. The results contribute to the understanding of vehicle-driver (and more generally, human-machine) dynamic interaction.     

The dynamics of traffic assignment and traffic control: A theoretical study

The paper considers traffic assignment, with traffic controls, in an increasingly dynamic way. First, a natural way of introducing the responsive policy, P_o, into steady state traffic assignment is presented. Then it is shown that natural stability results follow within a dynamical version of this static equilibrium model (still with a constant demand). We are able to obtain similar stability results when queues are explicitly allowed for, provided demand is constant. Finally we allow demand to vary with time; we consider the dynamic assignment problem with signal-settings now fixed. Here we assume that vehicles are very short and that deterministic queueing theory applies, and show that the time-dependent queueing delay at the bottleneck at the end of a link is a monotone function of the time-dependent input profile to the bottleneck. We have been unable to obtain results when dynamic demand and responsive signal control are combined.     

Performance Benefits in Passive Vehicle Suspensions Employing Inerters

A new ideal mechanical one-port network element named the inerter was recently introduced, and shown to be realisable, with the property that the applied force is proportional to the relative acceleration across the element. This paper makes a comparative study of several simple passive suspension struts, each containing at most one damper and inerter as a preliminary investigation into the potential performance advantages of the element. Improved performance for several different measures in a quarter-car model is demonstrated here in comparison with a conventional passive suspension strut. A study of a full-car model is also undertaken where performance improvements are also shown in comparison to conventional passive suspension struts. A prototype inerter has been built and tested. Experimental results are presented which demonstrate a characteristic phase advance property which cannot be achieved with conventional passive struts consisting of springs and dampers only.     

Trajectories and transitions: mobility after parenthood

Transportation - Life events, such as childbirth or retirement, provide a crucial opportunity in which an individual’s habitual travel routines are disrupted and they may be especially...     

Some insights in novel risk modeling of liquefied natural gas carrier maintenance operations

This study discusses the analysis of various modeling approaches and maintenance techniques applicable to the Liquefied Natural Gas (LNG) carrier operations in the maritime environment. Various novel modeling techniques are discussed; including genetic algorithms, fuzzy logic and evidential reasoning. We also identify the usefulness of these algorithms in the LNG carrier industry in the areas of risk assessment and maintenance modeling.     

Challenges and Benefits in the Design of Coastal Walking and Cycling Amenities: Toward a More Integrated Coastal Management Approach

The planning and development of pedestrian and cycling amenities in coastal urban environments is a challenging process because a wide range of policies and considerations must be taken into account. Among these, the concepts of sustainability and more recently, resilience, have been gaining prominence. Green Infrastructure design approaches can integrate aspects of both sustainability and resilience, providing multiple services within single development projects. This study focuses on Dublin and examines a range of amenity projects at various stages of development that relate to the provision of new coastal walking and/or cycle routes. These are initially contextualized at the city level before focusing specifically on challenges and benefits associated with the design and implementation of such projects. Based on our findings, recommendations are made for optimizing the potential of future projects to effectively integrate with other initiatives so as to deliver broader policy objectives. A simple sequential model is presented that should assist developers and decision-makers to take a more integrated, multidisciplinary approach to meeting policy goals when planning and developing coastal amenities. Finally, this is remodeled into a set of considerations that are generally applicable to coastal development proposals of significant scale.     

Failure mode and effects analysis of dual levelling valve airspring suspensions on truck dynamics

Failure mode and effects analysis are performed for a dual levelling valve pneumatic suspension to determine the effect of suspension failure on tractor–semi-trailer dynamics, using a detailed model of suspension pneumatics coupled with a truck dynamic model. A key element of failure analysis in suspensions with one or two levelling valves is determining the effect on the vehicle body roll when one or more failures occur. The failure modes considered are mainly the suspension pneumatic components, including clogged levelling valve, bent control rod, disabled lever arm, and punctured or leaking connectors and pipes. The pneumatic suspension is modelled in AMESim, with critical parameters established through component testing. Upon validating the AMESim component model experimentally, the pneumatic suspension model is integrated into TruckSim for studying the consequences of suspension failure on truck dynamics. The simulation results indicate that the second levelling valve in a dual-valve arrangement brings a certain amount of failure redundancy to the system, in the sense that when one side fails, the other side can compensate for the failure. Equipping the trailer with dual levelling valves brings an additional stabilising effect to the vehicle in the event of tractor suspension failure.     

Cost and time damping: evidence from aggregate rail direct demand models

There is a significant body of evidence from both disaggregate choice modelling literature and practical travel demand forecasting that the responsiveness to cost and possibly to time diminishes with journey length. This has, in Britain at least, been termed ‘Cost Damping’, and is recognised in guidance issued by the UK Department for Transport. However, the consistency of the effect across modes and data types has not been established. Cost damping, if it exists, affects both the forecasting of demand and our understanding of behaviour. This paper aims to investigate the evidence for cost and time damping in rail demand using aggregate rail ticket sales data. The rail ticket sales data in Britain has, for many years, formed the basis of analysis of a wide range of impacts of rail demand. It records the number of tickets sold between station pairs, and it is generally felt to provide a reasonably accurate reflection of travel demand. However, the consistency of these direct demand models with choice modelling and highway demand model structures has not been investigated. Rail direct demand models estimated by ticket sales data indicate only slight variation in the fare elasticity with distance, as is evidenced in the largest meta-analysis of price elasticities conducted to date (Wardman in J Transp Econ Policy 48(3):367–384, 2014). This study of UK elasticities shows strong variation between urban and inter-urban trips, presumably a segmentation at least in part by purpose, but less remaining variation by trip length. A lack of variation by length supports the hypothesis of cost damping, because constant cost sensitivity would imply that fare elasticity would increase strongly with distance, because of the increasing impact of higher fares at longer distances. In this paper we indicate that rail direct demand models have some consistency of behavioural paradigm with utility based choice models used in highway planning. We go on to use rail demand data to estimate time and fare elasticities in the context of various cost damping functions. Our empirical contribution is to estimate time elasticities on a basis directly comparable with cost elasticities and to show that the phenomenon of cost damping is strongly present in ticket sales data. This finding implies that cost damping should be included in models intended for multimodal analysis, which may otherwise give incorrect predictions.     

Genetics of traffic assignment models for strategic transport planning

This paper presents a review and classification of traffic assignment models for strategic transport planning purposes by using concepts analogous to genetics in biology. Traffic assignment models share the same theoretical framework (DNA), but differ in capability (genes). We argue that all traffic assignment models can be described by three genes. The first gene determines the spatial capability (unrestricted, capacity restrained, capacity constrained, and capacity and storage constrained) described by four spatial assumptions (shape of the fundamental diagram, capacity constraints, storage constraints, and turn flow restrictions). The second gene determines the temporal capability (static, semi-dynamic, and dynamic) described by three temporal assumptions (wave speeds, vehicle propagation speeds, and residual traffic transfer). The third gene determines the behavioural capability (all-or-nothing, one shot, and equilibrium) described by two behavioural assumptions (decision-making and travel time consideration). This classification provides a deeper understanding of the often implicit assumptions made in traffic assignment models described in the literature. It further allows for comparing different models in terms of functionality, and paves the way for developing novel traffic assignment models.     

Factors influencing travel mode choice among families with young children (aged 0–4): a review of the literature

Life events, such as the birth of a child, disrupt habitual travel behaviour and provide a valuable opportunity to influence the adoption of sustainable transport practices. However, in order for sustainable travel practices to be adopted, an understanding is required of the factors that influence travel mode choice among families with young children. Research in this field is particularly timely given many in the millennial generation, a comparably large cohort, are approaching this life stage. This comprehensive literature review develops a framework of factors influencing travel mode choice among families with young children. The findings reveal a multitude of factors influence decisions about mode choice, and, in particular, encourage travel by car, when travelling with young children. The paper concludes with an agenda for future research about travel among families with young children, a largely overlooked group of transport users.