排序方式: 共有112条查询结果,搜索用时 296 毫秒
1.
Taeksu Jung Yongsik Park Young Jin Kim Chongdu Cho 《International Journal of Automotive Technology》2017,18(6):1037-1045
Ensuring engine efficiency is a crucial issue for automotive manufacturers. Several manufacturers focus on reducing the time taken to develop and introduce brand new vehicles to the market. Thus, a synergic approach including various simulations is generally adopted to achieve a development schedule and to reduce the cost of physical tests. This study involved proposing a design process that is very useful in the preliminary development stage through effective support from simulations. This type of simulation-based design process is effective in developing timing chain drives; the use of this process, based on results from multiple trials, showed improvements in performance including low friction and vibration, improved durability, and cost-effective part design when compared to conventional processes. This study proposes an integrated approach to the preliminary design of an automotive timing chain system. The approach involves structural and dynamic analyses. The details of the design process are described by using the case of a virtual engine. This study conducted and summarized a dynamic and structural analysis as well as topological optimization to describe a process to obtain optimal results. The results of this study indicated the following improvements in overall performance factors: 12.1 % improvement in transmission error, 10.1 % reduction in chain tension, 46 % reduction in tensioner arm weight, and 11 % reduction in transversal displacement. 相似文献
2.
3.
4.
This paper presents an improved, significantly more efficient formulation of an existing model for bulk cargo or semi-bulk cargo ship scheduling problems with a single loading port. The original model, published by Ronen in 1986, was formulated as a non-linear, mixed integer program. In this work, the authors were able to re-formulate it into a linear one, by eliminating all the non-linearities of the original model. In addition, this model has far fewer integer variables than the original one. A numerical example has been given to illustrate the elimination of non-linearities and how 40 integer variables, in the original model, are reduced to just eight. This example also shows that this model is better at finding exact optimal solutions than the original one. It is also worth observing that the resulting model is a generalization of the ‘capacitated facility location problem’. 相似文献
5.
Tae-Woo Lee Nam-Kyu Park John F. Joint Woong Gyu Kim 《Maritime Policy and Management》2013,40(2):133-144
There have been many efforts to develop a logistics information system in the Korean logistics industry. In spite of these efforts, there are many points which need improvement in the Logistics Information System, of which function is the electronic data communication without added value. This paper aims to describe some of the main problems and the successful factors which are being found in the evolution of the present EDI systems for clearing import/export container cargoes, with special reference to Singapore, Korea, and Japan. Following this, leaving legal issues aside, to suggest workable guidelines for designing a new efficient EDI system for container cargo logistics. As a result of the review, the following successful factors are drawn: (a) the planning, requirement analysis and design of EDI are critical, as it provides a framework for its implementation; (b) as the data of customs clearance are an integral part of a logistics EDI system, the inclusion of customs in the system design is essential; (c) the sharing system of cargo data as the framework of the logistics EDI is efficient for data interchange; (d) the EDI software for the user has been developed and provided by an EDI network operating company; and (e) to facilitate communication between trading partners and the transport sector, it is necessary to adopt a global message standard, such as EDIFACT. 相似文献
6.
This paper offers novel insights to the design and implementation of an innovative state-of-charge (SOC) estimator for the lithium-ion (Li-Ion) series battery pack. The most interesting feature of this approach is that it can utilize information from each filtered terminal voltage of the Li-Ion cells connected in series for SOC estimation of the battery pack. Without actual sensing each discharging/charging current (DCC) applied to the Li-Ion cells, it is possible to extract each DCC estimation from the corresponding filtered terminal voltages with an equivalent electrical circuit model (EECM) identification of all Li-Ion cells in the battery pack. There are two advantages to SOC estimation of the battery pack with this approach. First, the proposal can be implemented simply and effectively, reducing the computational steps required for SOC estimation. By reducing computational steps, the proposal is expected to be more cost-effective. Second, the approach guarantees an improved SOC performance, even if the battery pack results in inevitable cell-to-cell variation among Li-Ion cells. Accordingly, there are fewer differences to previously estimated DCCs among Li-Ion cells. Specifically, all values from the estimated DCCs are properly compensated for by simultaneous parameter modification according to each cell’s electrochemical characteristics. Experimental results clearly demonstrate that our DCC sensorless SOC estimator provides robust SOC performance for the battery pack. This approach considered an experimental battery pack (12S1P) connected in series using 2.6 Ah LiCoO2 cells produced by Samsung SDI. 相似文献
7.
Development of a low-noise cooling fan for an alternator using numerical and doe methods 总被引:1,自引:0,他引:1
W. Kim W. -H. Jeon N. Hur J. -J. Hyun C. -K. Lim S. -H. Lee 《International Journal of Automotive Technology》2011,12(2):307-314
An alternator, which converts mechanical rotational energy into electrical energy, is an important component of a vehicle.
Alternators operate over a broad range of rotational speeds, typically from 3,000 RPM to 18,000 RPM, which demands a cooling
fan producing sufficient airflow, ideally with a minimum of noise. In the current study, an optimized alternator-cooling fan
was developed through a linked DOE(Design OF Experiment) process and numerical analysis. The SC/Tetra and FlowNoise S/W programs were used to calculate flow rates and noise levels, respectively, for the newly developed fan. Compared with
original model, the numerical results predicted a 3 dBA noise reduction; the measured reduction was 4 dBA. 相似文献
8.
License plate extraction method for identification of vehicle violations at a railway level crossing
B. K. Cho S. H. Ryu D. R. Shin J. I. Jung 《International Journal of Automotive Technology》2011,12(2):281-289
The primary cause of most railroad accidents is vehicle entry into railway level crossings despite warning messages. To identify
drivers who violate railway level crossing regulations, vehicle license plate recognition can be applied at railway level
crossings. The purpose of this paper is to present an effective method for extracting the license plate region from vehicle
images taken at railway level crossings. The method proposed in this paper uses the variation in the gray-level values across
the image of a license plate. For license plate region extraction, the character region is first recognized by identifying
the character width and the difference between the background region and the character region. The license plate region is
then extracted by finding the inter-character distance in the plate region. In addition, the license plate type is identified
by the difference in the gray-level value between the background region and the character region. The proposed method is effective
in solving the current challenges in extracting the license plate region from the damaged frames of license plates issued
for domestic use, including new types of license plates. According to the experimental results, the proposed method yields
a high extraction rate of 99.5% for vehicle license plates. 相似文献
9.
W.-H. Cho J.-G. Ih S.-H. Shin J.-W. Kim 《International Journal of Automotive Technology》2011,12(3):443-450
In this paper, a method to establish a decision criterion to evaluate the quality of small window motors using sound quality
(SQ) metrics is suggested. Although the sound level radiated from the motor is relatively small compared to other sounds in
a car, the sound from an abnormal motor gives an uncomfortable feeling and the impression of abnormal operation, which can
lead to customer complaints. To construct an objective decision criterion, the correlation between the SQ metrics and the
subjective decision on the passing or failure of the motor were investigated. Four representative SQ metrics, viz., loudness,
sharpness, roughness, and fluctuation strength, were calculated for the collected samples. It was observed that the loudness
and roughness of the motor sample group classified as abnormal was higher than those of the normal motors. For a single figure
rating for motor quality, an evaluation index for the motor sound was generated by combining the correlated SQ metrics with
proper weightings. Evaluation results on the specimens that were not employed in generating the quality evaluation index showed
a reasonable agreement with the subjective test at 73%. The suggested quality check method can replace the current subjective
decision procedure to identify the faulty motors. 相似文献
10.
Han-Wool Lee Jin-Rae Cho Weui-Bong Jeong 《International Journal of Automotive Technology》2017,18(5):823-832
For the numerical simulation of tire rolling noise, an important subject is the extraction of normal velocity data of the tire surface that are essential for the acoustic analysis. In the current study, a concept of periodically exciting contact force is introduced to effectively extract the tire normal velocity data. The ground contact pressure within contact patch that is obtained by the static tire contact analysis is periodically applied to the whole tread surface of stationary tire. The periodically exciting contact forces are sequentially applied with a time delay corresponding to the tire rolling speed. The tire vibration is analyzed by the mode superposition in the frequency domain, and the acoustic analysis is performed by commercial BEM code. The proposed method is illustrated through the numerical experiment of 3-D smooth tire model and verified from the comparison with experiment, and furthermore the acoustical responses are investigated to the tire rolling speed. 相似文献