The impact of structural flexibilities of wheelsets and rails on the hunting behaviour of a railway vehicle

The hunting motion of a passenger coach is investigated using a multibody system in which the wheelsets and the rails can be modelled as flexible bodies. By comparing the results for different model variants, in which the structural flexibilities of the wheelsets and of the rails are either taken into account or neglected, the impact of the flexibilities is analysed. It turns out that the flexibilities of both the wheelsets and the rails have a significant impact on the hunting behaviour by increasing the lateral motions of the wheelsets and lowering the critical speed. In order to investigate the impact of the flexibilities under different operating conditions, the calculations are carried out for track geometries using different rail profiles (60E1, 60E2) and different rail cants (1:40, 1:20) and for different values for the friction coefficient (0.25…0.4) at the wheel–rail contact. The results show that the influence of the flexibilities is the strongest for high lateral forces, which occur e.g. for contact geometries leading to high hunting frequencies and for high values of the friction coefficient. The results also show in some cases a strong impact of the flexibilities on the position of the wheel–rail contact on the running surface of the rail, which is of particular interest with respect to wear simulation.     

Dynamics and fishery of the Peruvian hake: Between nature and man

Mean length in the catch of Peruvian hake (Merluccius gayi peruanus) declined drastically by 8 cm in a few months in 1992. The 1991–93 El Niño event marked the beginning of changes in bottom environmental conditions, that along with other changes in the ecosystem, were the cause of the disappearance of large sized old hake from the traditional fishing grounds and the invasion of these areas by high concentrations of small sized young hake, traditionally distributed in the southern areas. A misinterpretation of this change gave an optimistic perception of the state of the stock, leading to a large increase of the fishing fleet and therefore to an increase of the fishing pressure on this resource. Catch increased quickly to very high levels in 1996, the fishery indicators of relative abundance remained stable, while global abundance of hake was diminishing. The resource responded to these natural variations of environment and to the intense fishing pressure with changes in some aspects of its biology and ecology. The most remarkable was the decrease of the length and age at first maturity that led to spawning by 1 year old (19 cm) individuals in a species whose observed longevity was 14 years.In 2002 a total and indefinite fishery closure was established by the Peruvian government and a technical commission for the hake recovery was created, which carried out continuous monitoring of the stock. After a closure of 20 months the indicators showed signs of recovery and the fishery was reopened in 2004. However, after an encouraging beginning during 2004 and the first quarter of 2005, neither abundance nor age structure had improved by the end of 2005, and in fact were deteriorating by the start of 2006. The survival of the age 2 and 3 groups was very low and few 4+ years old individuals were observed. Several factors working at different time scales have been proposed to explain the status of hake. The impact of the fishery, variations in the abiotic environment, predation by the jumbo squid (Dosidicus gigas) and cannibalism were considered as potential causal factors of this decline.     

Patchwork in an interconnected world: the challenges of transport networks in Sub-Saharan Africa*

Sub-Saharan Africa has recently undergone, or still do in many countries, a period of transport infrastructure expansion. Current policies are centred on the development of international links, which require large capital-intensive projects and are sometimes economically dubious. This paper reviews the past policies and transport functions since colonial times by placing them in their economic and political context. We find that present strategies have similarities to the ones prevailing in previous periods, where expansion phases dominated by transport-led economic growth theories were followed by a stagnation of Africa’s infrastructure development. In view of the challenges in translating findings from empirical research into right policies, we identify the potential of more balanced and sustainable strategic investments, notably by reinforcing the existing secondary transport networks converging into urban centres.     

Characterizing European high speed train stations using intermodal time and entropy metrics

This paper presents a quantitative method for characterizing high speed train stations in terms of passenger intermodality. The aim of the procedure is two-fold: firstly, the method is to be used as an objective measure for comparing stations in order to detect suboptimal points and improve the performance of stations as nodal points; secondly, the method provides a means to embed intermodality into regional accessibility models, allowing comprehensive modelling at lower scales. The empirical base of the work comprises data from 27 European high speed rail stations, which is deemed an appropriate statistical sample for the whole European rail network. Using the entropy metric, we found that several different patterns emerged: there was a clear hierarchy of stations which was linked to their respective roles within the system, while strong constraints impeded stations from performing optimally as true intermodal nodes.     

Recovery of North-East Atlantic temperature fields from profiling floats: Determination of the optimal float number from sampling and instrumental error analysis

Argo is an international project that is deploying an array of temperature and salinity profiling floats over the global ocean. Here we use the error formulation derived from Optimal Statistical Interpolation to estimate statistical errors associated with the recovery of the temperature field in the North-East Atlantic ocean. Results indicate that with the present distribution of floats (119 in the considered domain), scales of wavelength larger than 500 km can be recovered with a relative uncertainty (rms error relative to the standard deviation of the field) of about 7% at 50 m, 8% at 200 m and 10% at 1000 m. This corresponds to mean absolute errors of 0.111 °C at 50 m, 0.104 °C at 200 m and 0.073 °C at 1000 m.The splitting of total errors into instrumental and sampling contributions reveals that, in the present scenario, errors are more due to the small number of floats than to instrumental errors, especially at upper levels. For scales larger than 500 km this will hold true until 200–250 floats are deployed (less than 200 for deep levels). In such a simulated scenario, the number of observations and the technology become approximately equally limiting factors for the accuracy of the temperature field mapping, with total relative errors of less than 2% at upper levels and about 3% at 1000 m.     

Planning strategies for promoting environmentally suitable pedestrian pavements in cities

This paper examines the relevance of incorporating comprehensive life-cycle environmental data into the design and management of pedestrian pavements to minimize the impact on the built environment. The overall primary energy demand and global warming potential of concrete, asphalt and granite sidewalks are assessed. A design with a long functional lifetime reduces its overall primary energy demand and global warming potential due to lower maintenance and repair requirements. However, long-lived construction solutions do not ensure a lower life-cycle primary energy demand and global warming potential than for shorter-lived designs; these values depend on the environmental suitability of the materials chosen for paving. Asphalt sidewalks reduce long-term global warming potential under exposure conditions where the functional lifetime of the pavements is less than 15 years. In places where it is known that a concrete sidewalk can have a life of at least 40 years, a concrete sidewalk is the best for minimizing both long-term primary energy demand and global warming potential. Granite sidewalks are the largest energy consumers and greenhouse gas contributors.     

Model course to revalidate deck officers’ competences using simulators

In accordance with Part A, Chapter I, Section I/11 Revalidation of Certificates of the Standards of Training, Certification and Watchkeeping for Seafarers (STCW) 2010 Convention, continued evaluation of professional competence shall be established, among others, by successfully completing an approved training course or courses. Every master, officer and radio operator holding a certificate issued or recognised under any chapter of the convention other than chapter VI, who is serving at sea or intends to return to sea after a period ashore, shall be required, at intervals not exceeding 5 years, to demonstrate continued professional competence, in order to continue to qualify for seagoing service. The main objective of this research is to design a model course using simulation technology to train and demonstrate seafarers’ competence in accordance with the provisions of STCW Code for existing seafarers who need to revalidate their professional maritime certificates also in accordance with the standards governing the use of simulators, Reg I/12 of 2010 STCW Code. The purpose of this revalidation simulation-based model course is to assist maritime training institutes and their teaching staff in organising and introducing specific training courses for revalidation of certificates of competence (CoCs) as well as enhancing, updating or supplementing existing training material where the quality and effectiveness of the training courses may thereby be improved. Only those STCW competences relating to ship bridge simulators will be considered for the model course scenario development and testing.     

Biological control of harmful algal blooms: A modelling study

A multispecies dynamic simulation model (ERSEM) was used to examine the influence of allelopathic and trophic interactions causing feeding avoidance by predators, on the formation of harmful algal blooms, under environmental scenarios typical of a Mediterranean harbour (Barcelona). The biological state variables of the model included four functional groups of phytoplankton (diatoms, toxic and non-toxic flagellates and picophytoplankton), heterotrophic flagellates, micro- and mesozooplankton and bacteria. The physical–chemical forcing (irradiance, temperature and major nutrient concentrations) was based on an actual series of measurements taken along a year cycle in the Barcelona harbour. In order to evaluate potential effects of advection, some runs were repeated after introducing a biomass loss term. Numerical simulations showed that allelopathic effects of a toxic alga on a non-toxic but otherwise similar competitor did not have appreciable influence on the dynamics of the system. However, induction of avoidance of the toxic alga by predators, which resulted on increased predation pressure on other algal groups had a significant effect on the development of algal and predator populations. The presence of advection overrided the effect of these interactions and only allowed organisms with sufficiently high potential growth rates to thrive.     

Accessible pre-design calculation tool to support the definition of EV components

The new freedoms in design that electric powertrains offer lead to a wide variety of configurations to consider when developing an electric vehicle (EV) from scratch. Furthermore, the strong relation of the battery size with vehicle weight, range and performances leads to a set of interrelated dependencies that can result in many design loops to fulfil the vehicle targets, market constraints and regulations simultaneously. The paper presents a pre-design tool to assist the electric vehicle development process by representing the different constraints and the possible feasible solutions in a single plot with the need of a small amount of inputs accesible to assess at pre-design phase. As a result, the tool depicts a set of feasible vehicle configurations that could fulfil the targets easing the interaction and loops among different expertise areas. To better assist selection, it also provides a sensitivity analysis of the performances to selected inputs and the user can introduce a cost function depending on vehicle weight and battery size. The tool is based on the vehicle longitudinal dynamics equations and equations that model the market and regulations constraints. It is aimed at providing an overview of the main specifications for component selection avoiding detailed vehicle modelling in the early pre-design phase at which the vehicle characteristics and even powertrain architecture are unknown. Finally, the tool results quality is evaluated by further developing one of its solutions for passenger car in four different vehicle configurations with the simulation software vemSim and AVL Cruise. The results of the simulations are compared to the solution of the pre-design tool to evaluate the level of fidelity and the deviations in the final result that can appear depending on the final architecture, components characteristics and control strategy.