The Movingo integrated ticket: seamless connections across the mälardalen region of Sweden

ABSTRACT

The need for improved public transport (PT) ticketing in ever-growing deregulated PT markets has made well-designed integrated ticketing systems a priority area of intervention for PT service providers around the world. Yet, very little practical evidence of its impacts are reported in Sweden and in the world at large. The focus of this study was the impacts of the Movingo integrated ticketing scheme in terms of PT patronage, user satisfaction and the perceived quality of the ticketing set-up. Three travel surveys were conducted along the Stockholm-Uppsala route. Methods including logistic regression and correlated t-tests were used to analyse the samples. The findings suggest that the scheme made rail commuting more attractive resulting in an overall increase of about 24% in ticket sales with 3% – 15% car commuters reporting that they patronised PT services after the project. The scheme also resulted in increased rail commuter satisfaction. The overall perceived quality of the ticketing set-up did not however improve due to interoperability challenges. Service providers’ uncertainty about equitable distribution of revenue among the participating service providers, interoperability challenges and the lack of interest among most of the participating service providers to sell Movingo tickets are some issues to be addressed.     

Investigation of carriers’ ability to transfer toll increases: an empirical analysis of freight agents’ relative market power

Transportation - Design of effective freight policies requires a comprehensive understanding of freight agents’ interactions. A critical component of the interaction is the freight...     

Costs of air pollutants from shipping: a meta-regression analysis

ABSTRACT

This study estimated the external cost of air pollution from shipping by means of a meta-regression analysis, which has not been made before. Three pollutants, which were included in most of the primary studies, were considered: nitrogen oxides (NO_x), sulphur dioxides (SO₂) and particulate matters with a diameter of max 2.5 micrometres (PM_2.5). All primary studies included damages of health and a majority added impacts on agriculture and estimated the cost of air pollutants by transferring cost estimates from studies on costs of air emissions from transports in Europe. Different regression models and estimators were used and robust results were found of statistically significant emission elasticities of below one, i.e. total external costs increase by less than 1% when emissions increase by 1%. There was a small variation between the pollutants, with the highest elasticity for PM_2.5 and lowest for NO_x. Calculations of the marginal external cost of the pollutants showed the same pattern, with this cost being approximately six times higher for PM_2.5 than for the other pollutants. Common to all pollutants was that the marginal external cost decreases when emission increases. Another robust result was a significant increase in the cost of studies published in journals compared with other publication outlets. These findings point out some caution when transferring constant external unit cost of air pollutant from shipping, which is much applied in the literature, and the cost functions estimated in this study could thus provide a complementary transfer mechanism.     

Do supra-modal traveller types exist? A travel behaviour market segmentation using Goal framing theory

Travel behaviour market segmentations have become a popular method of identifying different types of car users, bicyclists or public transport users. However, while previous studies have looked at different types of users within single modes, such as the car, little research has explored the existence of traveller types transcending modes. The study presented here is an extension of an earlier segmentation study that distinguished travellers based on their individual preferences, yet did so independent of their current mode choice. The data came from a travel survey at a middle-sized UK university and were analysed using a combination of hierarchical and iterative partitioning methods. Crucially, however, the current study uses a different theoretical framework to previous segmentation research—goal framing theory—which may more adequately explain the findings than models used in the past such as the theory of planned behaviour. The findings supported earlier work, suggesting the presence of seemingly stable traveller types that cut across modes and can be distinguished based on gain, hedonic and normative goals. This has important implications for policies aimed at encouraging mode change which may have been too preoccupied with changing people’s attitudes rather than paying attention to people’s underlying travel preferences.

     

Time-series analysis of remote-sensed chlorophyll and environmental factors in the Santa Monica–San Pedro Basin off Southern California

The time-series of remote-sensed surface chlorophyll concentration measured by SeaWiFS radiometer from September 1997 to December 2001 and the relevant hydrological and meteorological factors (remote-sensed sea surface temperature, atmospheric precipitation, air temperature and wind stress) in Santa Monica Bay and adjacent waters off southern California were analyzed using wavelet and cross-correlation statistical methods. All parameters exhibited evident seasonal patterns of variation. Wavelet analysis revealed salient long-term variations most evident in air temperature during El Niño 1997–1998 and in wind stress during La Niña 1998–1999. Short-period (<100 days) variations of remote-sensed chlorophyll biomass were mostly typical to spring seasons. Chlorophyll biomass was significantly correlated with air temperature and wind stress: an increase of chlorophyll biomass followed with 5–6-day time lag an increase of wind stress accompanied by a simultaneous decrease of air temperature. The mechanism of these variations was an intensification of phytoplankton growth resulting from the mixing of water column by wind stress and entrainment of nutrients into the euphotic layer.     

S^2 BHCA Multiple AUVs cooperation oriented control architecture

Oceanographic survey, or other similar applications should be the applications of multiple AUVs. In this paper, the skill ＆ simulation based hybrid control architecture （S^2BHCA） as the controller＇s design reference was proposed. It is a multi-robot cooperation oriented intelligent control architecture based on hybrid ideas. The S^2BHCA attempts to incorporate the virtues of the reactive controller and of the deliberative controller by introducing the concept of the ＂skill＂. The additional online task simulation ability for cooperation is supported, too. As an application, a multiple AUV control system was developed with three ＂skills＂ for the MCM mission including two different cooperative tasks. The simulation and the sea trials show that simple task expression, fast reaction and better cooperation support can be achieved by realizing the AUV controller based on the S^2BHCA.     

Evasive manoeuvres with a steering robot

In the pursuit of an objective rating on vehicle stability performance, it is always desirable to reduce disturbances and inconsistencies during experimental evaluations, especially the ones introduced by human drivers. This paper presents the development of a steering robot designed for closed-loop steering tasks during evasive manoeuvres. It describes the controller structure and discusses experimental results, in addition to simulation/vehicle model verifications and theoretical control analysis.     

ICE(R)系列新动车用 COBRA诊断系统--对车务人员和维修的创新支持

ICE 系列新动车ICE3、ICET、ICE TD采用了层级结构的诊断系统COBRA(Central On Board RailwayAssistant车载辅助中心),有各装置的自诊断和动车有关的上一级诊断.COBRA诊断系统有清晰的目标群取向,总是只向车务人员和维修人员提供重要的信息和可能的补救措施.在列车进段之前就对自动释放和经无线传输的诊断数据做了计算.列车一进段就准备好了维修人员和维修材料,例如更换损坏件和磨耗件,在进行清洁作业的同时为列车下一次运行准备好了良好的状态.     

Mixed analysis of shell and solid elements using the overlaying mesh method

 This article presents a mixed method of analyzing shell elements and solid elements using the overlaying mesh method. In the structural design of a ship's hull, the shell elements are used for the global model. However, the solid elements are necessary to analyze the stress concentration zones or the vicinity of a crack. In such cases, the models are analyzed using zooming analysis, in which the results of a global model analysis are transferred to a local model analysis by imposing boundary conditions. This method is more advantageous than zooming analysis in terms of the accuracy of the solution and the modeling flexibility. Some examples of a plate model with a cracked surface or with a projection are shown in order to demonstrate the effectiveness of the method. Received: August 6, 2002 / Accepted: November 25, 2002 Address correspondence to: S. Nakasumi (sumi@nasl.t.u-tokyo.ac.jp) Updated from the Japanese original, which won the 2002 SNAJ prize (J Soc Nav Archit Jpn 2001;189:219–224; and 190:655–662)     

Dynamic Simulation of a Smart Crank and Slider Mechanism

In this paper, a smart crank and slider mechanism is analyzed mostly from a dynamic view. By means of dynamic explicit finite element method, 3D nonlinear structure is simulated. It is proved that the mechanism can effectively accomplish smart movement prescribed. And in order to ensure reciprocal movement with higher frequency, measures should be taken to avoid over heating of parts. Compared with internal energy, kinetic energy of total rigid body is dominating, and Y direction equivalent rigid velocity is much higher than X direction velocity. Equivalent rigid velocity of all parts is consistent with respective movement condition. For both energy and velocity, slider effect is dominating. Three direction equivalent inertia force oscillates. Force amplitude in Y -direction is comparitively the greatest.