Ground truthing sediment profile imagery with traditional benthic survey data along an established disturbance gradient

Macrobenthic surveys are an expensive, slow and labour intensive means to establish the health of benthic communities. Sediment profile imagery (SPI) is a means of rapid reconnaissance for monitoring large areas of the benthos. SPI has often been used to monitor gross anthropogenic disturbance. The aim of this study is to determine if SPI can be used as a tool to reliably map change in communities along natural estuarine gradients. Macrobenthic sampling was carried out at five stations along an established estuarine gradient. This faunal data was analysed using standard multivariate techniques and to ground truth a concurrent SPI survey. Faunal analysis showed that habitat quality in Inner Galway Bay was generally good, with some localised disturbance from the River Corrib and the sewage out flow exterior to the city dock. Four distinct groups were identified with a degree of overlap occurring between stations 3 and 4. While existing SPI indices mapped habitat quality in the same manner as the faunal data for end member stations, the level of distinction between the habitats of an intermediate staging was found to be poor. This lack of distinction amongst the stage 2 and 3 stations was overcome by developing a tailored index, the Galway Bay index of habitat quality (GBHQ). This index was derived from the 5 observed variables in the SPI data that were determined to best match the faunal distribution by permutative mantel testing. The 5 observed variables from the SPI data were the depth of the apparent redox potential discontinuity (aRPD), the depth of penetration by the prism, and the presence/absence of infauna, surface faecal pellet layer and biogenic mounding. The GBHQ was able to distinguish between the 5 stations to a greater extent than previously described indices, showing clearly the separate groupings defined by the faunal data. The index was tested on a follow up SPI survey and shown to be applicable in mapping a broader range of habitats in Galway Bay. Indices generated for localised mapping of estuarine gradients should be derived from observed features and be ground truthed using faunal data. Some aspects of the GBHQ should be generally applicable to fine grained boreal estuarine sediments (aRPD/penetration), while others may be of limited utility in other locations depending on the digging characteristics of the particular SPI camera, and local factors influencing the persistence of biogenic features in the profile. This derivation technique provides a simple way to optimise SPI to particular studies and localities.     

Modelling the impact of weather conditions on active transportation travel behaviour

Three weather sensitive models are used to explore the relationship between weather and home-based work trips within the City of Toronto, focusing on active modes of transportation. The data are restricted to non-captive commuters who have the option of selecting among five basic modes of auto driver, auto passenger, transit, bike and walk. Daily trip rates in various weather conditions are assessed. Overall, the results confirm that impact of weather on active modes of transportation is significant enough to deserve attention at the research, data collection and planning levels.     

Cultural Models of the Coast in Australia: Toward Sustainability

Cultural models of the coast affect—and are affected by—our marine ethics, frameworks for coastal ownership, and management practices. The coast can be seen as an ecosystem with intrinsic values, a commodity that can be bought and sold, a community place where people meet, a landscape with aesthetic appeal, a productive system that generates profits, a property to be managed, or a spiritual realm that relates to proper order and reverence. Each of these cultural constructions interacts with the others and this can create conflicts over rights and responsibilities. Each construction has implications for who should manage the coast, to what ends, and by what means. This article explores the negative and positive implications of seven cultural models to the Australian coast and makes suggestions about the value of Australian Indigenous and sustainability perspectives to a durable human relationship with the coast. Examples are drawn from recent coastal developments in Australia, such as Native Title debates, the marine protected area process, and Coastcare.     

Dynamics analysis of an omni-directional vehicle

In a modern society, traffic congestion is a major problem in every metropolis. To solve the problem of traffic congestion an innovative omni-directional vehicle is proposed. This research has mainly focussed on developing the comprehensive vehicle dynamics model for an omni-directional road vehicle. Then the stability of the vehicle in the yaw plane was analysed under different scenarios based on the response of the side slip angle. Finally an active steering PID controller was suggested and which, according to the results of the simulation, improved the yaw plane stability.     

Why and How to Use Customer Opinions: A Quality-of-Life and Customer Satisfaction-Oriented Foundation for Performance-Based Decision-Making

Abstract

The concepts of ‘customer satisfaction’ (CS) and ‘quality of life’ (QOL) have both been used, on a limited basis, in strategic planning and performance measurement at state departments of transportation. However, the meanings and usefulness of these concepts are still unclear or evolving to many practitioners. Based on a review of the literature and customer opinion data collected for various transportation studies in the USA and Europe, this paper offers two important contributions to the transportation literature. The paper clarifies the relationship between the CS and QOL concepts, placing CS in the broader context of customer opinions and subjective well-being. The paper then identifies six categories of survey tools for collecting customer opinions, describing how each can be used within a performance management framework to reveal the QOL impacts of transportation decisions. Agencies can use the definitions, conceptual relationships, performance measures, and decision-making processes discussed in this paper to refine their performance management programs, to better understand customer and public perceptions, and to make systematic progress toward their QOL oriented goals.     

Residual stress distributions in ship hull specimens

This paper provides an in-depth study of residual stress distributions found in stiffened steel plate structures, such as those typically used in ship hulls. The effect of stiffener spacing on the distribution of residual stress components was studied. The welding heat input was also varied between high and moderate to study the effect of heat input level on residual stress distributions. Four specimens, resembling typical stiffened steel plate structures used in ship hulls were built and tested. Steel plates of 9.5 mm thickness were stiffened by welding L127 × 76 × 9.5 steel angles. The test was completed using the neutron diffraction method. The three normal components of residual stress were obtained in this study. It was found that a lower heat input results in higher tensile residual stress and that there exists a critical stiffener spacing somewhere beyond 250 mm that creates a maximum tensile residual stress value near the welded connection.     

Applications of Random-Utility-based Multi-region Input–Output Models of Transport and the Spatial Economy

Abstract

An introduction to random-utility-based multiregional input–output models used for the purpose of spatial economic and transport interaction modelling is provided. The main methodological developments and important results of a dozen applications from the years 1996–2013 are described. This is followed by an outlook of potential future directions. Further research is mainly needed in five areas: (a) overall validation of the method, perhaps through back-casting applications on infrastructure plans with observed trade impacts; (b) extensions of trade coefficient models to add realism and improve accuracy; (c) the use of multi-scale modelling to capture interdependencies between geographical scales and to improve the representation of exports and imports; (d) improvements in the representation of price effects, as well as innovation and technological progress, by way of variable technical coefficients; and (e) a deeper investigation of the algorithm used to include elastic selling prices.     

Sediment profile imaging (SPI) and micro-electrode technologies in impact assessment studies: Example from two fjords in Southern Chile used for fish farming

Two state-of-the-art techniques were used to assess the impact of organic loading from fish farming in two fjords of Southern Chile, Pillan and Reñihue Fjords. A sediment profile imaging (SPI) camera was deployed and sediment microprofiles (oxygen, H₂S, redox and pH) were measured in undisturbed sediment cores collected using a HAPS corer. Four out of seven stations in Pillan Fjord were found to be severely disturbed: SPI images showed azoic conditions (no apparent Redox Potential Discontinuity layer, no evidence of aerobic life form, presence of an uneaten fish food layer, negative OSI scores). These findings were corroborated by very high oxygen consumption rates (700–1200 mmol m^− 2 day^− 1), H₂S concentrations increasing quickly within the sediment column and redox potential decreasing towards negative values within a few mm down core. Results for Reñihue Fjord were not so straightforward. SPI images indicated that most of the stations (R3 to R7) presented well-mixed conditions (high apparent RPD layers, presence of infauna, burrows, etc.), but oxygen profiles yielded consumption rates of 230 to 490 mmol m^− 2 day^− 1 and organic carbon mineralization of 2.16 to 4.53 g C m^− 2 day^− 1. These latter values were close to the limit of aerobic degradation of organic matter although no visible changes were recorded within the sediment column. In view of our findings, the importance of integrating multidisciplinary methodologies in impact assessment studies was discussed.     

Characterizing metro networks: state,form, and structure

The broad goal of this paper is to characterize the network feature of metro systems. By looking at 33 metro systems in the world, we adapt various concepts of graph theory to describe characteristics of State, Form and Structure; these three characteristics are defined using new or existing network indicators. State measures the complexity of a network; we identify three phases in the development of transit networks, with mature systems being 66% completely connected. Form investigates the link between metro systems and the built environment, distinguishing networks oriented towards regional accessibility, local coverage or regional coverage. Structure examines the intrinsic properties of current networks; indicators of connectivity and directness are formulated. The method presented is this paper should be taken as a supplement to traditional planning factors such as demand, demography, geography, costs, etc. It is particularly useful at the strategic planning phase as it offers information on current and planned systems, which can then be used towards setting a vision, defining new targets and making decision between various scenarios; it can also be used to compare existing systems. We also link the three characteristics to transit line type and land-use; overall the presence of tangential and/or (semi)-circumferential lines may be key. In addition, we have been able to identify paths of development, which should be strongly considered in future projects.