Organic carbon budget for the Gulf of Bothnia

We calculated input of organic carbon to the unproductive, brackish water basin of the Gulf of Bothnia from rivers, point sources and the atmosphere. We also calculated the net exchange of organic carbon between the Gulf of Bothnia and the adjacent marine system, the Baltic Proper. We compared the input with sinks for organic carbon; permanent incorporation in sediments and mineralization and subsequent evasion of CO₂ to the atmosphere. The major fluxes were riverine input (1500 Gg C year^− 1), exchange with the Baltic Proper (depending on which of several possible DOC concentration differences between the basins that was used in the calculation, the flux varied between an outflow of 466 and an input of 950 Gg C year^− 1), sediment burial (1100 Gg C year^− 1) and evasion to the atmosphere (3610 Gg C year^− 1). The largest single net flux was the emission of CO₂ to the atmosphere, mainly caused by bacterial mineralization of organic carbon. Input and output did not match in our budget which we ascribe uncertainties in the calculation of the exchange of organic carbon between the Gulf of Bothnia and the Baltic Proper, and the fact that CO₂ emission, which in our calculation represented 1 year (2002) may have been overestimated in comparison with long-term means. We conclude that net heterotrophy of the Gulf of Bothnia was due to input of organic carbon from both the catchment and from the Baltic Proper and that the future degree of net heterotrophy will be sensible to both catchment export of organic carbon and to the ongoing eutrophication of the Baltic Proper.     

Large-eddy simulation of cross-flow around ship sections

The present work is motivated by phenomena occurring in the flow field around ship-like bodies with an incoming lateral flow (cross-flow, 90 ° drift angle). Three-dimensional unsteady flows around different ship sections are investigated by using computational fluid dynamic (CFD) tools with large-eddy simulation (LES) subgrid-scale turbulence model. The simulation results are compared to measurements at several Reynolds numbers in the 90–200,000 range. Focus in our investigation is on the characterization of the motion of vortex structures generated by the separated flow. Another target in the study is to obtain better knowledge of the hydrodynamic forces acting on the sections. Computed pressure and drag coefficients are compared with experimental measurements. The comparison between simulations and measurements shows that an LES model can predict the flow field around ship sections in detail and the hydrodynamic forces acting on the sections.     

Consistency in preferences for road safety: An analysis of precautionary and stated behavior

This study analyzes stated willingness to pay (WTP) for traffic safety, the use of traffic safety equipments, and the consistency between the two. Using data from a Swedish contingent valuation study we find that the estimated value of a statistical life (VSL) based on the respondents' rear-seatbelt usage is similar to the estimate found using the respondents' stated WTP. However, when estimating VSL based on the respondents' use of bicycle helmets we find a significantly higher VSL; the VSL from bicycle-helmet usage is 7 times higher than the estimate based on seatbelt usage. Moreover, we do not find any strong relationship between risk perception and usage, or individual stated WTP and usage. Hence, the main conclusion, based on our analysis, is that stated and observed WTP are not consistent.     

Influence of AC system design on the realisation of tractive efforts by high adhesion locomotives

The main task for heavy haul railway operators is to reduce the cost of exported minerals and enhance the long-term viability of rail transport operations through increasing productivity by running longer and heavier trains. The common opinion is that this is achievable by means of implementation of high adhesion locomotives with advanced AC traction technologies. Modern AC high adhesion locomotives are very complex mechatronic systems and can be designed with two alternative traction topologies of either bogie or individual axle controls. This paper describes a modelling approach for these two types of AC traction systems with the application of an advanced co-simulation methodology, where an electrical system and a traction algorithm are modelled in Matlab/Simulink, and a mechanical system is modelled in a multibody software package. Although the paper concentrates on the analysis of the functioning for these two types of traction control systems, the choice of reference slip values also has an influence on the performance of both systems. All these design variations and issues have been simulated for various adhesion conditions at the wheel–rail interface and their influence on the high traction performance of a locomotive equipped with two three-axle bogies has been discussed.     

Is it expensive to be poor? Public transport in Sweden

Transportation - One of the reasons to subsidise public transport is to improve the mobility of low-income groups by providing affordable public transport; however, the literature describes a...     

Creative nodes,logistical networks,and the future of the metropolis

A paradigmatic shift away from traditional quantitative methods towards qualitative dynamic analysis is proposed in order to fully comprehend the future of the metropolis. Over the last millennium the great structural changes of production, location, trade, culture and institutions have most likely been triggered by slow but steady changes to those logistical networks which are responsible for the movement of key factors of production. Nonlinear dynamic methods such as catastrophe theory and synergetics can help to provide the necessary analytical insights. Creativity and accessibility to logistical networks are portrayed as important catalysts of qualitative change. requests for offprints     

The flight perturbation problem

Airlines spend considerable time, effort and financial resources on planning. It is essential to create a competitive timetable and construct a fleet and a crew schedule that utilizes these resources to the maximum. Unfortunately, it is all too common that an airline is faced with the necessity of reconstructing their schedules due to some unforeseen event, for example an aircraft breakdown or a crew member that is indisposed. In this paper, an application that can help airlines solve the complex problem of reconstructing aircraft schedules is presented. A mixed integer multicommodity flow model with side constraints is developed and further reformulated into a set packing model using the Dantzig—Wolfe decomposition. Cancellations, delays and aircraft swaps are used to resolve the perturbation, and the model ensures that the schedule returns to normal within a certain time. Two column generation schemes for heuristically solving the model are tested on real problem data obtained from a Swedish domestic airline. The computational tests show that the application is capable of presenting high quality solutions in a few seconds and therefore can be used as a dynamic decision support tool by the airlines.     

Trends in vehicle motion control for automated driving on public roads

ABSTRACT

In this paper, we describe how vehicle systems and the vehicle motion control are affected by automated driving on public roads. We describe the redundancy needed for a road vehicle to meet certain safety goals. The concept of system safety as well as system solutions to fault tolerant actuation of steering and braking and the associated fault tolerant power supply is described. Notably restriction of the operational domain in case of reduced capability of the driving automation system is discussed. Further we consider path tracking, state estimation of vehicle motion control required for automated driving as well as an example of a minimum risk manoeuver and redundant steering by means of differential braking. The steering by differential braking could offer heterogeneous or dissimilar redundancy that complements the redundancy of described fault tolerant steering systems for driving automation equipped vehicles. Finally, the important topic of verification of driving automation systems is addressed.     

Out-of-round railway wheels—a study of wheel polygonalization through simulation of three-dimensional wheel-rail interaction and wear

The objective of this study is to develop a tool for investigation of wheel tread polygonalization with radial irregularities including 1 to 20 wavelengths around the circumference of the wheel. Therefore, an existing multibody system model for simulation of general three-dimensional train-track interaction (accounting for frequencies up to several kHz) is extended with rolling contact mechanics according to FASTSIM. Furthermore, the model is also modified to allow for general wheel-rail profiles. The numerical model uses the concept of an iteration scheme including simulation of dynamic train-track interaction in the time domain coupled with a long-term wear model. A demonstration example including a bogie of a subway train travelling on a straight track is presented. In the example, an initial wheel out-of-roundness (OOR) is applied to the wheels. This irregularity is based on an amplitude spectrum derived from measurements on new wheels. Simulation results show that the most important wavelength-fixing mechanisms of the wheel OOR are (i) the vertical resonance of the coupled train-track system at approximately 40 Hz (the P2 resonance) and (ii) the frequency region including the lowest vertical track antiresonance at 165 Hz, where the dynamic track stiffness is high. Only a straight track is studied, but the model allows for asymmetric train motion on such a track.